- 您現在的位置：買賣IC網 > PDF目錄1924 > IDT82P20516DBFG (IDT, Integrated Device Technology Inc)IC LIU T1/E1/J1 16CH SH 484BGA PDF資料下載
參數資料
| 型號： | IDT82P20516DBFG |
| 廠商： | IDT, Integrated Device Technology Inc |
| 文件頁數： | 48/115頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC LIU T1/E1/J1 16CH SH 484BGA |
| 標準包裝： | 84 |
| 功能： | 線路接口單元（LIU） |
| 接口： | E1，J1，T1 |
| 電路數： | 16 |
| 電源電壓： | 1.8V, 3.3V |
| 功率（瓦特）： | 2.89W |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 484-LFBGA |
| 供應商設備封裝： | 484-CABGA（19x19） |
| 包裝： | 托盤 |
| 包括： | AIS 警報檢測器和發生器，回送功能，PRBS 發生器 / 檢測器，遠程檢測器和發生器 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁當前第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁
IDT82P20516
16-CHANNEL SHORT HAUL E1 LINE INTERFACE UNIT
Functional Description
38
December 17, 2009
Inband Loopback (IB) Detection
The extracted data is used to compare with the target IB code. The
length of the target activate/deactivate IB code can be 3 to 8 bits, as
determined by the IBAL[1:0]/IBDL[1:0] bits (b3~2/b1~0, IBL,...). The
content of the target activate/deactivate IB code is programmed in the
IBA[7:0]/IBD[7:0] bits (b7~0, IBDA/IBDD,...). Refer to Figure-20.
Figure-20 IB Detection
During comparison, if the extracted data coincides with the target
activate/deactivate IB code with no more than 10-2 bit error rate for a
certain period, the IB code is detected. The period depends on the
setting of the AUTOLP bit (b3, LOOP,...).
If the AUTOLP bit (b3, LOOP,...) is ‘0’, Automatic Digital/Remote
Loopback is disabled. In this case, when the activate IB code is detected
for more than 40 ms, the IBA_S bit (b1, STAT1,...) will be set to indicate
the activate IB code detection; when the deactivate IB code is detected
for more than 40 ms (T1/J1 mode) / 30 ms (E1 mode), the IBD_S bit (b0,
STAT1,...) will be set to indicate the deactivate IB code detection.
If the AUTOLP bit (b3, LOOP,...) is ‘1’, Automatic Digital/Remote
Loopback is enabled. In this case, when the activate IB code is detected
for more than 5.1 seconds, the IBA_S bit (b1, STAT1,...) will be set to
indicate the activate IB code detection. The detection of the activate IB
code in the receive path will activate Remote Loopback or the detection
of the activate IB code in the transmit path will activate Digital Loopback
Loopback). When the deactivate IB code is detected for more than 5.1
seconds, the IBD_S bit (b0, STAT1,...) will be set to indicate the deacti-
vate IB code detection. The detection of the deactivate IB code in the
receive path will deactivate Remote Loopback or the detection of the
deactivate IB code in the transmit path will deactivate Digital Loopback
A transition from ‘0’ to ‘1’ on the IBA_S/IBD_S bit (b1/b0, STAT1,...)
or any transition (from ‘0’ to ‘1’ or from ‘1’ to ‘0’) on the IBA_S/IBD_S bit
(b1/b0, STAT1,...) will set the IBA_IS/IBD_IS bit (b1/b0, INTS1,...) to ‘1’
respectively, as selected by the IB_IES bit (b0, INTES,...). When the
IBA_IS/IBD_IS bit (b1/b0, INTS1,...) is ‘1’, an interrupt will be reported
3.5.6
ERROR COUNTER
An internal 16-bit Error Counter is used to count one of the following
errors:
LBPV: BPV/CV detected in the receive path (line side);
LEXZ: EXZ detected in the receive path (line side);
LBPV + LEXZ: BPV/CV and EXZ detected in the receive path (line
side);
SBPV: BPV/CV detected in the transmit path (system side) (dis-
abled in Transmit Single Rail NRZ Format mode);
SEXZ: EXZ detected in the transmit path (system side);
SBPV + SEXZ: BPV/CV and EXZ detected in the transmit path
(system side) (disabled in Transmit Single Rail NRZ Format
mode);
PRBS/ARB error.
The CNT_SEL[2:0] bits (b4~2, ERR,...) select one of the above
errors to be counted.
The Error Counter is buffered. It is updated automatically or manu-
ally, as determined by the CNT_MD bit (b1, ERR,...).
The Error Counter is accessed by reading the ERRCH and ERRCL
registers.
3.5.6.1 Automatic Error Counter Updating
When the CNT_MD bit (b1, ERR,...) is ‘1’, the Error Counter is
updated every one second automatically.
The one-second timer uses MCLK as clock reference. The expiration
of each one second will set the TMOV_IS bit (b0, INTTM) and induce an
When each one second expires, the Error Counter transfers the
accumulated error numbers to the ERRCH and ERRCL registers and
the Error Counter will be cleared to start a new round counting. The
ERRCH and ERRCL registers should be read in the next second, other-
wise they will be overwritten.
When the ERRCH and ERRCL registers are all ‘1’s and there is still
error to be accumulated, the registers will be overflowed. The overflow is
indicated by the CNTOV_IS bit (b0, INTS2,...) and will induce an inter-
The process of automatic Error Counter updating is illustrated in
from Rx path
or Tx path
Decoding
Target code -
length & content
programming
Comparison
相關PDF資料 |
PDF描述 |
|---|---|
| IDT82P2281PF | TXRX T1/E1/J1 LONG/SHORT 80-TQFP |
| IDT82P2282PF | TXRX T1/J1/E1 2CHAN 100-TQFP |
| IDT82P2284BB | TXRX T1/J1/E1 4CHAN 208-PBGA |
| IDT82P2288BBG | TXRX OCTAL T1/E1/J1 256-PBGA |
| IDT82P2521BHG | IC LIU E1 21+1CH SHORT 640-PBGA |
相關代理商/技術參數 |
參數描述 |
|---|---|
| IDT82P20516DBFG8 | 制造商:Integrated Device Technology Inc 功能描述:IC LIU T1/E1/J1 16CH SH 484BGA |
| IDT82P20516DBFGBLANK | 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:16-Channel Short Haul E1 Line Interface Unit |
| IDT82P2281 | 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:Single T1/E1/J1 Long Haul Short Haul Transceiver |
| IDT82P2281_09 | 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:Single T1/E1/J1 Long Haul / Short Haul Transceiver |
| IDT82P2281PF | 功能描述:TXRX T1/E1/J1 LONG/SHORT 80-TQFP RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR) |
發布緊急采購，3分鐘左右您將得到回復。