
____________________________________________________ DS34T101, DS34T102, DS34T104, DS34T108
181 of 366
SAToP/CESoPSN_Bundle[n]_cfg[95:64] 0x200+n*4
Bits
Data Element Name
R/W
Reset
Value
Description
[30]
Tx_cond_data
R/W
None
0 = Regular operation
1 = Use conditioning octet specified by
[29]
Tx_dest_framing
R/W
None
Only applies to T1 framed traffic
0 = Destination framer operates in SF framing
1 = Destination framer operates in ESF framing
[28]
Tx_CAS_source
R/W
None
Source of transmit CAS bits:
0 = TDMoP block’s RSIG input
1 = Tx software CAS table
[27]
Reserved
R/W
None
Must be set to zero
[26:16]
TDM_frames_in_packet
or
TDM_bytes_in_packet
R/W
None
For structured and structured with CAS CESoPSN
bundles: number of TDM frames included in each packet.
For SAToP bundles: number of TDM bytes included in
each packet.
Note: For Structured with CAS bundles the allowed values
are:
E1 MF: 16, 8, 4, 2, 1
T1 SF/ESF: 24, 12, 8, 6, 4, 3, 2, 1
[15:13]
Reserved
R/W
None
Must be set to zero
[12:11]
Tx_SATOP_bundle_type
R/W
None
Bundle type of transmitted payload:
00 = Unstructured
01 = Structured
10 = Structured with CAS
11 = Reserved
[10:6]
Reserved
R/W
None
Must be set to zero.
[5:4]
Tx_cond_octet_type
R/W
None
be transmitted towards packet network:
00 = ETH_cond_octet_a
01 = ETH_cond_octet_b
10 = ETH_cond_octet_c
11 = ETH_cond_octet_d
[3:2]
Rx_SAToP/CESoPSN_
bundle_type
R/W
None
Bundle type of received packets:
00 = Unstructured
01 = Structured
10 = Structured with CAS
11 = Reserved
[1:0]
Protection_mode
R/W
None
00 = Stop sending packets
01 = Send each packet once with the first header
10 = Send each packet once with the second header
11 = Send each packet twice: one with the first header
and one with the second header
SAToP/CESoPSN_Bundle[n]_cfg[127:96] 0x300+n*4
Bits
Data Element Name
R/W
Reset
Value
Description
[31]
Reserved
R/W
None
Must be set to zero.
[30:16]
Rx_PDVT
R/W
None
Packet delay variation time value for SAToP/CESoPSN
bundles. See section
10.6.10. Bits[30:26] are used only
when unframed. The resolution is determined by the
interface type as follows:
For framed E1/T1: 0.5 ms
For unframed E1/T1 or serial bundles: 32 bit periods
For high speed interface: 128 bit periods
Allowed values:
Minimum allowed value: 3 (for all interface types)
For T1 SF, ESF: Rx_PDVT < 0x300