- 您現在的位置：買賣IC網 > PDF目錄1915 > DS31256+ (Maxim Integrated Products)IC CTRLR HDLC 256-CHANNEL 256BGA PDF資料下載
參數資料
| 型號： | DS31256+ |
| 廠商： | Maxim Integrated Products |
| 文件頁數： | 162/183頁 |
| 文件大小： | 0K |
| 描述： | IC CTRLR HDLC 256-CHANNEL 256BGA |
| 產品培訓模塊： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 標準包裝： | 40 |
| 控制器類型： | HDLC 控制器 |
| 接口： | 串行 |
| 電源電壓： | 3 V ~ 3.6 V |
| 電流 - 電源： | 500mA |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 256-BBGA |
| 供應商設備封裝： | 256-BGA（27x27） |
| 包裝： | 管件 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁第119頁第120頁第121頁第122頁第123頁第124頁第125頁第126頁第127頁第128頁第129頁第130頁第131頁第132頁第133頁第134頁第135頁第136頁第137頁第138頁第139頁第140頁第141頁第142頁第143頁第144頁第145頁第146頁第147頁第148頁第149頁第150頁第151頁第152頁第153頁第154頁第155頁第156頁第157頁第158頁第159頁第160頁第161頁當前第162頁第163頁第164頁第165頁第166頁第167頁第168頁第169頁第170頁第171頁第172頁第173頁第174頁第175頁第176頁第177頁第178頁第179頁第180頁第181頁第182頁第183頁
DS31256 256-Channel, High-Throughput HDLC Controller
8 of 183
DS31256 has been designed to handle up to 132Mbps in both the receive and transmit directions without
any potential loss of data due to priority conflicts in the transfer of data from the HDLC engines to the
FIFO and vice versa.
The FIFO transfers data from the HDLC engines into the FIFO and checks to see if the FIFO has filled to
beyond the programmable high watermark. If it has, then the FIFO signals to the DMA that data is ready
to be burst read from the FIFO to the PCI Bus. The FIFO block controls the DMA block and it tells the
DMA when to transfer data from the FIFO to the PCI Bus. Since the DS31256 can handle multiple
HDLC channels, it is quite possible that at any one time, several HDLC channels will need to have data
transferred from the FIFO to the PCI Bus. The FIFO determines which HDLC channel the DMA will
handle next via a Host configurable algorithm, which allows the selection to be either round robin or
priority, decoded (with HDLC Channel 1 getting the highest priority). Depending on the application, the
selection of this algorithm can be quite important. The DS31256 cannot control when it will be granted
PCI Bus access and if bus access is restricted, then the host may wish to prioritize which HDLC channels
get top priority access to the PCI Bus when it is granted to the DS31256.
When the DMA transfers data from the FIFO to the PCI Bus, it burst reads all available data in the FIFO
(even if the FIFO contains multiple HDLC packets) and tries to empty the FIFO. If an incoming HDLC
packet is not large enough to fill the FIFO to the high watermark, then the FIFO will not wait for more
data to enter the FIFO, it will signal the DMA that an end-of-frame (EOF) was detected and that data is
ready to be transferred from the FIFO to the PCI Bus by the DMA.
In the transmit path, a very similar process occurs. As soon as a HDLC channel is enabled, the HDLC
(Layer 2) engines begin requesting data from the FIFO. Like the receive side, the 16 ports are priority
decoded with Port 0 generally getting the highest priority. Hence, if multiple ports are requesting packet
data, the FIFO will first satisfy the requirements on all the enabled HDLC channels in the lower
numbered ports before moving on to the higher numbered ports. Again there is no potential loss of data
as long as the transmit throughput maximum of 132Mbps is not exceeded. When the FIFO detects that a
HDLC engine needs data, it then transfers the data from the FIFO to the HDLC engines in 32-bit chunks.
If the FIFO detects that the FIFO is below the low watermark, it then checks with the DMA to see if
there is any data available for that HDLC Channel. The DMA will know if any data is available because
the Host on the PCI Bus will have informed it of such via the pending-queue descriptor. When the DMA
detects that data is available, it informs the FIFO and then the FIFO decides which HDLC channel gets
the highest priority to the DMA to transfer data from the PCI Bus into the FIFO. Again, since the
DS31256 can handle multiple HDLC channels, it is quite possible that at any one time, several HDLC
channels will need the DMA to burst data from the PCI Bus into the FIFO. The FIFO determines which
HDLC channel the DMA will handle next via a host configurable algorithm, which allows the selection
to be either round robin or priority, decoded (with HDLC Channel 1 generally getting the highest
priority).
When the DMA begins burst writing data into the FIFO, it will try to completely fill the FIFO with
HDLC packet data even if it that means writing multiple packets. Once the FIFO detects that the DMA
has filled it to beyond the low watermark (or an EOF is reached), the FIFO will begin transferring 32-bit
dwords to the HDLC engine.
One of the unique attributes of the DS31256 is the structure of the DMA. The DMA has been optimized
to maintain maximum flexibility yet reduce the number of bus cycles required to transfer packet data.
The DMA uses a flexible scatter/gather technique, which allows that packet data to be place anywhere
within the 32-bit address space. The user has the option on the receive side of two different buffer sizes
相關PDF資料 |
PDF描述 |
|---|---|
| DS3141+ | IC FRAMER DS3/E3 SNGL 144CSBGA |
| DS31412N | IC 12CH DS3/3 FRAMER 349-BGA |
| DS3150TN | IC LIU T3/E3/STS-1 IND 48-TQFP |
| DS3154N+ | IC LIU DS3/E3/STS-1 QD 144CSBGA |
| DS3164+ | IC ATM/PACKET PHY QUAD 400-BGA |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS31256+ | 功能描述:輸入/輸出控制器接口集成電路 256Ch High Thruput HDLC Cntlr RoHS:否 制造商:Silicon Labs 產品: 輸入/輸出端數量: 工作電源電壓: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-64 封裝:Tray |
| DS31256B | 功能描述:輸入/輸出控制器接口集成電路 256Ch High Thruput HDLC Cntlr RoHS:否 制造商:Silicon Labs 產品: 輸入/輸出端數量: 工作電源電壓: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-64 封裝:Tray |
| DS31256DK | 功能描述:網絡開發工具 RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V |
| DS31256-W+ | 制造商:Maxim Integrated Products 功能描述:ENVOY 256 CHANNEL HDLC - WAIVER - Rail/Tube |
| DS312BNC | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Industrial Control IC |
發布緊急采購，3分鐘左右您將得到回復。