參數資料
型號： DS2152
英文描述： Enhanced T1 Single-Chip Transceiver
中文描述： 增強型T1單芯片收發器
文件頁數： 26/94頁
文件大?。?/td> 1003K
代理商： DS2152
DS2152
26 of 93
CCR4: COMMON CONTROL REGISTER 4
(Address=11 Hex)
(MSB) (LSB)
RSRE
RPCSI
RFSA1
RFE
RFF
THSE
TPCSI
TIRFS
SYMBOL
RSRE
POSITION
CCR4.7
NAME AND DESCRIPTION
Receive Side Signaling Reinsertion Enable.
See Section 7.2 for
details.
0 = do not re-insert signaling bits into the data stream presented at
the RSER pin
1 = re-insert the signaling bits into data stream presented at the
RSER pin
Receive Per-Channel Signaling Insert.
See Section 7.2 for more
details.
0 = do not use RCHBLK to determine which channels should have
signaling re-inserted
1 = use RCHBLK to determine which channels should have
signaling re-inserted
Receive Force Signaling All 1s.
See Section 7.2 for more details.
0 = do not force extracted robbed-bit signaling bit positions to a 1
1 = force extracted robbed-bit signaling bit positions to a 1
Receive Freeze Enable.
See Section 7.2 for details.
0 = no freezing of receive signaling data will occur
1 = allow freezing of receive signaling data at RSIG (and RSER if
CCR4.7 = 1).
Receive Force Freeze.
Freezes receive side signaling at RSIG (and
RSER if CCR4.7=1); will override Receive Freeze Enable (RFE).
See Section 7.2 for details.
0 = do not force a freeze event
1 = force a freeze event
Transmit Hardware Signaling Insertion Enable.
See Section 7.2
for details.
0 = do not insert signaling from the TSIG pin into the data stream
presented at the TSER pin
1 = insert the signaling from the TSIG pin into data stream presented
at the TSER pin
Transmit Per-Channel Signaling Insert.
See Section 7.2 for
details.
0 = do not use TCHBLK to determine which channels should have
signaling inserted from TSIG
1 = use TCHBLK to determine which channels should have
signaling inserted from TSIG
Transmit Idle Registers (TIR) Function Select.
See Section 8 for
timing details.
0 = TIRs define in which channels to insert idle code
1 = TIRs define in which channels to insert data from RSER (i.e.,
Per-Channel Loopback function)
RPCSI
CCR4.6
RFSA1
CCR4.5
RFE
CCR4.4
RFF
CCR4.3
THSE
CCR4.2
TPCSI
CCR4.1
TIRFS
CCR4.0
相關PDF資料
PDF描述
DS2160Q Data Encryption Processor
DS2160QN Peripheral IC
DS2165QL Solid-State Recorder
DS2165QN Solid-State Recorder
DS2167N Transcoder
相關代理商/技術參數
參數描述
DS2152DK 功能描述:KIT DESIGN DS2152 RoHS:否 類別:編程器，開發系統 >> 過時/停產零件編號 系列:- 標準包裝:1 系列:- 傳感器類型:CMOS 成像，彩色（RGB） 傳感范圍:WVGA 接口:I²C 靈敏度:60 fps 電源電壓:5.7 V ~ 6.3 V 嵌入式:否 已供物品:成像器板 已用 IC / 零件:KAC-00401 相關產品:4H2099-ND - SENSOR IMAGE WVGA COLOR 48-PQFP4H2094-ND - SENSOR IMAGE WVGA MONO 48-PQFP
DS2152L 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS2152L+ 功能描述:網絡控制器與處理器 IC Enhanced T1 Transceiver RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS2152L-ES 制造商:DALL 功能描述:
DS2152LN 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*