
BYV410X-600_1
 NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 01 — 29 June 2009
9 of 10
NXP Semiconductors
BYV410X-600
Enhanced ultrafast dual rectifier diode
10. Legal information
10.1 Data sheet status
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term 'short data sheet' is explained in section "Definitions".
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product 
status information is available on the Internet at URL 
http://www.nxp.com
.
10.2 Definitions
Draft
 — The document is a draft version only. The content is still under 
internal review and subject to formal approval, which may result in 
modifications or additions. NXP Semiconductors does not give any 
representations or warranties as to the accuracy or completeness of 
information included herein and shall have no liability for the consequences of 
use of such information.
Short data sheet
 — A short data sheet is an extract from a full data sheet 
with the same product type number(s) and title. A short data sheet is intended 
for quick reference only and should not be relied upon to contain detailed and 
full information. For detailed and full information see the relevant full data 
sheet, which is available on request via the local NXP Semiconductors sales 
office. In case of any inconsistency or conflict with the short data sheet, the 
full data sheet shall prevail.
10.3 Disclaimers
General
 — Information in this document is believed to be accurate and 
reliable. However, NXP Semiconductors does not give any representations or 
warranties, expressed or implied, as to the accuracy or completeness of such 
information and shall have no liability for the consequences of use of such 
information.
Right to make changes
 — NXP Semiconductors reserves the right to make 
changes to information published in this document, including without 
limitation specifications and product descriptions, at any time and without 
notice. This document supersedes and replaces all information supplied prior 
to the publication hereof.
Suitability for use
 — NXP Semiconductors products are not designed, 
authorized or warranted to be suitable for use in medical, military, aircraft, 
space or life support equipment, nor in applications where failure or 
malfunction of an NXP Semiconductors product can reasonably be expected 
to result in personal injury, death or severe property or environmental 
damage. NXP Semiconductors accepts no liability for inclusion and/or use of 
NXP Semiconductors products in such equipment or applications and 
therefore such inclusion and/or use is at the customer’s own risk.
Applications
 — Applications that are described herein for any of these 
products are for illustrative purposes only. NXP Semiconductors makes no 
representation or warranty that such applications will be suitable for the 
specified use without further testing or modification.
Quick reference data
 — The Quick reference data is an extract of the 
product data given in the Limiting values and Characteristics sections of this 
document, and as such is not complete, exhaustive or legally binding. 
Limiting values 
— Stress above one or more limiting values (as defined in 
the Absolute Maximum Ratings System of IEC 60134) may cause permanent 
damage to the device. Limiting values are stress ratings only and operation of 
the device at these or any other conditions above those given in the 
Characteristics sections of this document is not implied. Exposure to limiting 
values for extended periods may affect device reliability.
Terms and conditions of sale 
— NXP Semiconductors products are sold 
subject to the general terms and conditions of commercial sale, as published 
at 
http://www.nxp.com/profile/terms
, including those pertaining to warranty, 
intellectual property rights infringement and limitation of liability, unless 
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of 
any inconsistency or conflict between information in this document and such 
terms and conditions, the latter will prevail.
No offer to sell or license
 — Nothing in this document may be interpreted or 
construed as an offer to sell products that is open for acceptance or the grant, 
conveyance or implication of any license under any copyrights, patents or 
other industrial or intellectual property rights.
Export control
 — This document as well as the item(s) described herein may 
be subject to export control regulations. Export might require a prior 
authorization from national authorities.
10.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks 
are the property of their respective owners.
11. Contact information
For more information, please visit: 
http://www.nxp.com
For sales office addresses, please send an email to: 
salesaddresses@nxp.com
Document status 
[1][2]
Product status
[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.