參數資料
型號: AM79C30AJC
廠商: ADVANCED MICRO DEVICES INC
元件分類: 數字傳輸電路
英文描述: Digital Subscriber Controller⑩ (DSC⑩) Circuit
中文描述: DATACOM, DIGITAL SLIC, PQCC44
封裝: PLASTIC, LCC-44
文件頁數: 59/101頁
文件大?。?/td> 1607K
代理商: AM79C30AJC
Am79C30A/32A Data Sheet
59
DSC has no D-channel communications also in
progress.
A priority scheme is included to prevent the DSC from
dominating the bus. A new bus access will not be al-
lowed until the device detects BAC bit set to 1 in two
successive frames.
Care must be taken in use of the Bus Access Request
bit (CITDR0.7). As stated above, once access is gained
through use of this bit, the DSC will control the D and
C/I0 channels as long as it remains set. Software must
remember to clear this bit to allow other devices access.
D-Channel Arbitration
When the TIC bus feature is enabled (PPCR3.3=1), the
DLC will automatically request TIC bus access without
software intervention. The access procedure is much
the same as the C/I0 channel above.
The TIC bus control logic will check to see if the BAC
bit on the line is 0 or 1 to determine if another down-
stream device currently owns the bus. If zero, the DSC
will wait. Once a one is detected in BAC, the logic will
place the DSC's TIC bus address on the open drain
output. It will then sample this output at the IOM-2 re-
ceived data strobe point to check for conflict with other
downstream devices. If the received TIC address and
the contents of PPCR3.2-0 match, the logic will set the
BAC output to 0 indicating to other downstream de-
vices that the DSC has taken control of the D and C/I0
channels.
After is sets its BAC output to 0, the logic will compare
the TIC address on the line with PPCR3.2-0 in one
more frame to ensure ownership of the bus. If a mis-
compare occurs, the DSC will set its BAC output to 1
and return to the beginning of arbitration.
Once access is gained, the D and C/I0 channels are
the possession of the DSC. This allows the DSC to
complete D-channel communications with the Layer 1
device without interruption from other downstream de-
vices. After the DSC completes D-channel communica-
tion, logic will set the DSC's BAC bit output back to 1,
as long as the BAC request bit (CITDR0.7) is not set.
This allows other downstream devices access to the D
and C/I0 channels. If CITDR0.7=1, the device assumes
C/I0 communication is still in progress and the BAC
output remains 0 until software clears CITDR0.7.
A priority scheme is included to prevent the DSC from
dominating the bus. A new bus access will not be al-
lowed until the device detects BAC bit set to 1 in two
successive frames.
相關PDF資料
PDF描述
AM79C30AVC Digital Subscriber Controller⑩ (DSC⑩) Circuit
AM79C32A Digital Subscriber Controller⑩ (DSC⑩) Circuit
AM79C32AJC Digital Subscriber Controller⑩ (DSC⑩) Circuit
AM79C32AVC Digital Subscriber Controller⑩ (DSC⑩) Circuit
AM79C850KC SUPERNET-R 3
相關代理商/技術參數
參數描述
AM79C30AJC/D 制造商:Rochester Electronics LLC 功能描述:- Bulk
AM79C30AJC/DTR 制造商:Rochester Electronics LLC 功能描述:- Tape and Reel
AM79C30AJC/E 制造商:Rochester Electronics LLC 功能描述:- Bulk
AM79C30AJC/E3 制造商:Rochester Electronics LLC 功能描述:- Bulk
AM79C30AJC/E4 制造商:Rochester Electronics LLC 功能描述:- Bulk