(Continued from Page 1) The digital servo loop measures the time difference between the input and output sample rates within" />
參數資料
型號: AD1896AYRSZ
廠商: Analog Devices Inc
文件頁數: 9/28頁
文件大?。?/td> 0K
描述: IC CONV SAMPLE RATE ASYNC 28SSOP
標準包裝: 1
類型: 采樣率轉換器
應用: 車載音頻,處理,接收器
安裝類型: 表面貼裝
封裝/外殼: 28-SSOP(0.209",5.30mm 寬)
供應商設備封裝: 28-SSOP
包裝: 管件
產品目錄頁面: 776 (CN2011-ZH PDF)
REV. A
AD1896
–17–
(Continued from Page 1)
The digital servo loop measures the time difference between
the input and output sample rates within 5 ps. This is necessary
in order to select the correct polyphase filter coefficient. The
digital servo loop has excellent jitter rejection for both input and
output sample rates as well as the master clock. The jitter rejec-
tion begins at less than 1 Hz. This requires a long settling
time whenever
RESET is deasserted or when the input or
output sample rate changes. To reduce the settling time, upon
deassertion of
RESET or a change in a sample rate, the digital
servo loop enters the fast settling mode. When the digital servo
loop has adequately settled in the fast mode, it switches into the
normal or slow settling mode and continues to settle until the
time difference measurement between input and output sample
rates is within 5 ps. During fast mode, the MUTE_OUT signal
is asserted high. Normally, the MUTE_OUT is connected to the
MUTE_IN pin. The MUTE_IN signal is used to softly mute
the AD1896 upon assertion and softly unmute the AD1896
when it is deasserted.
The sample rate ratio circuit is used to scale the filter length of
the FIR filter for decimation. Hysteresis in measuring the
sample rate ratio is used to avoid oscillations in the scaling of
the filter length, which would cause distortion on the output.
However, when multiple AD1896s are used with the same serial
input port clock and the same serial output port clock, the hys-
teresis causes different group delays between multiple AD1896s.
A phase-matching mode feature was added to the AD1896 to
address this problem. In phase-matching mode, one AD1896,
the master, transmits its sample rate ratio to the other AD1896s,
the slaves, so that the group delay between the multiple AD1896s
remains the same.
The group delay of the AD1896 can be adjusted for short or
long delay. An address offset is added to the write pointer of the
FIFO in the sample rate converter. This offset is set to 16 for
short delay and 64 for long delay. In long delay, the group delay
is effectively increased by 48 input sample clocks.
The sample rate converter of the AD1896 can be bypassed
altogether using the bypass mode. In bypass mode, the AD1896’s
serial input data is directly passed to the serial output port with-
out any dithering. This is useful for passing through nonaudio
data or when the input and output sample rates are synchronous
to one another and the sample rate ratio is exactly 1 to 1.
The AD1896 is a 3.3 V, 5 V input tolerant part and is available
in a 28-lead SSOP package. The AD1896 is 5 V input-tolerant
only when the VDD_IO supply pin is supplied with 5 V.
相關PDF資料
PDF描述
CS6422-CSZ IC SPEAKERPHONE ENHANCED 20SOIC
CXC3106A14S7P CONN PLUG 3POS STRGHT PIN
CS8421-CZZ IC SAMPLE RATE CONVERTER 20TSSOP
CS8406-CZZ IC XMITTER DGTL 192KHZ 28TSSOP
ADAU1701JSTZ IC AUDIO PROC 2ADC/4DAC 48-LQFP
相關代理商/技術參數
參數描述
AD1896AYRSZ 制造商:Analog Devices 功能描述:IC, SAMPLE RATE CONVERTER, SSOP-28
AD1896AYRSZRL 功能描述:IC SAMP-RATEHP/CONV 24BIT 28SSOP RoHS:是 類別:集成電路 (IC) >> 線性 - 音頻處理 系列:- 其它有關文件:STA321 View All Specifications 標準包裝:1 系列:Sound Terminal™ 類型:音頻處理器 應用:數字音頻 安裝類型:表面貼裝 封裝/外殼:64-LQFP 裸露焊盤 供應商設備封裝:64-LQFP EP(10x10) 包裝:Digi-Reel® 其它名稱:497-11050-6
AD1896YRS 制造商:Analog Devices 功能描述: 制造商:Rochester Electronics LLC 功能描述:192KHZ 8:1 STEREO ASYNC SAMPLE RATE CONV - Bulk
AD1896YRSRL 制造商:Analog Devices 功能描述:
AD1898 制造商:Analog Devices 功能描述:- Bulk