參數資料
型號： 73S1217F-EB
廠商： Maxim Integrated Products
文件頁數： 28/93頁
文件大小： 0K
描述： BOARD EVAL 73S1217F CBL/DOC/CD
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 1
系列： *
73S12xxF Software User Guide
UG_12xxF_016
34
Rev. 1.50
ICC_RST3 = 0xB0,
ICC_RST4 = 0xC0,
ICC_RST5 = 0xD0,
ICC_RST6 = 0xE0,
ICC_RST7 = 0xF0
IccCE: Input parameter
Card Event parameter. The following settings are available as defined in
API_STRUCT_12.h. Set this variable according to the hardware design where either
interrupt 2 or interrupt 3 is used for an external card event detect.
ICC_INT2_NONE
= 0x00,
ICC_INT2_I2C
= 0x01, //Use INT2 for card event detection
ICC_INT3_I2C
= 0x02, //Use INT3 for card event detection
Return Codes
None.
The T=0 and T=1 protocols affect which guard and wait times to use. For protocols other than these, use
whichever protocol (either T=0 or T=1) best matches the timing requirements. If neither protocol
matches, then the application will need to bypass the Smart Card UART.
ICC_Activate()
Purpose
Activate the contacts of the selected Smart Card, as specified by eIccId. The VCC,
RST, I/O and CLK signals are configured according to the ISO 7816-3 standard.
Synopsis
ICC_RC ICC_Activate ( IN struct ICC_Activate_t *pActivate, IN struct ICC_t *pATR
);
Struct {
enum ICC_VOLTAGE IccVCC;
Unsigned char IccVCCOffDelay;
// # of etus delay before VCC should go off.
Unsigned char IccVCCTmr;
// # of etus to wait for VCC stable.
unsigned char IccResetDelay,
int IccInitialWaitingTime,
Boolean IccATR_TimeoutEnabled,
int IccATR_Timeout,
int IccTS_Timeout
} ICC_Activate_t;
Where ICC_VOLTAGE is defined as:
VCC_0V
= 0,
VCC_1V8 = 1,
VCC_3V
= 2,
VCC_5V
= 3
Parameters
IccVcc: Input parameter
Voltage to apply when powering up this card.
IccVCCOffDelay: Input parameter
Number of ETUs to delay before shutting off the VCC. The default should be set to
3 ETUs. The maximum value is 15.
IccVCCTmr: Input parameter
Number of ETUs to wait for VCC to become stable. This time is calculated as:
timer * 30.5 s using a 32768 Hz clock. A value of 0 will result in no timeout (as
opposed to zero time). The maximum value is 15.
IccResetDelay: Input parameter
Specifies the number of ETUs to keep RESET asserted after power has stabilized.
IccInitialWaitingTime: Input parameter
Specifies the maximum delay in ETUs between the leading edges of two
consecutive characters of the ATR response.
相關PDF資料
PDF描述
EBC30DRTS CONN EDGECARD 60POS DIP .100 SLD
UPM2F470MHD CAP ALUM 47UF 315V 20% RADIAL
UPM2D101MHD CAP ALUM 100UF 200V 20% RADIAL
UPA1V182MHD CAP ALUM 1800UF 35V 20% RADIAL
73S1215F-EB BOARD EVAL 73S1215F CBL/DOC/CD
相關代理商/技術參數
參數描述
73S1217F-EB-Lite 功能描述:開發板和工具包 - 8051 73S1217F EVB Lite w/Plug & Play/Usb RoHS:否 制造商:Silicon Labs 產品:Development Kits 工具用于評估:C8051F960, Si7005 核心: 接口類型:USB 工作電源電壓:
73S1217F-IMR/F 制造商:TERIDIAN 制造商全稱:TERIDIAN 功能描述:Bus-Powered 80515 System-on-Chip with USB, ISO 7816 / EMV, PINpad and More
73S13B 制造商:QUARTZCOM 制造商全稱:QUARTZCOM the communications company 功能描述:-20 ~ +70 °C commercia l application -30 ~ +75 °C on request
73S5040G01X0A 制造商:NEX Computers 功能描述:INTEL 40GB SSD - Bulk
73S8009C 制造商:TERIDIAN 制造商全稱:TERIDIAN 功能描述:Versatile Power Management and Smart Card Interface IC
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*