參數資料
型號： Z8ICE000ZEM
英文描述： SCR Thyristor; SCR Type:Standard Gate; Peak Repetitive Off-State Voltage, Vdrm:200V; On-State RMS Current, IT(rms):20A; Peak Non Repetitive Surge Current, Itsm:300A; Gate Trigger Current Max, Igt:30uA
中文描述： 低成本Z8模擬器
文件頁數： 21/80頁
文件大?。?/td> 1345K
代理商： Z8ICE000ZEM
Z8ICE000ZEM User’s Manual
Setup and Installation
ZiLOG
UM000500-Z8X1098
2–5
target board. Plug the other end of the cable into the matching black emulation cable connector in front
of the emulator (see Figure 2-2).
NOTE:
The inductance and capacitance of the emulation cable may affect the signals to and from the
emulator and target board, especially if the target board has low-current drivers, pull-ups, and pull-
downs.
Setting Up the Z8ICE000ZEM Oscillator and Option Jumpers
The oscillator and option jumpers are accessible on the emulator. Refer to Figure 2-2 for emulator jumper
locations. Refer to Table 2-1 and Table 2-2 when setting up the jumpers. Also refer to Appendix C for the
complete Z8ICE000ZEM Emulator Schematic Diagram.
The option jumpers allow you to configure things like whether the emulator provides power to your design
on the V
CC
pin of the emulated Z8
PLUS
device, and how the clock pin is connected.
The clock for the emulated device can be provided from an oscillator in the emulator or from a TTL-level
clock on your design. For electrical reasons, the clock cannot be supplied from the oscillator on your design
until you are done using the ICEBOX and have either programmed an EPROM or OTP Z8
PLUS
and installed
it in your design.
WARNING!
If your design already has a power supply, do not power your design from the emulator V
CC
pin on loca-
tion JP1 of the Z8M001 board.
Power Up
If anything unusual (such as unexpected sounds and smells) occurs the first time you turn on the power
supply, quickly turn off the power supply and check your connections. If your power supply allows voltage
adjustment, ensure that adjustment is within specified range (see “Hardware Specifications” section). If your
power supply has a current meter, ensure that the emulator is drawing within the rated current.
After emulator power-up, press the MASTER RESET button to reset the emulator. (Pressing the TARGET
RESET button resets only the Z8M001 ICE chip.) If the emulator is not powering your design through the
V
CC
pin, turn on the power supply of the design.
Power Down
When powering down, follow the procedure described below:
1.
Press the TARGET RESET button on the emulator.
2.
Power down the target application board (if using its own power supply).
3.
Remove the target pod.
4.
Power down the emulator.
相關PDF資料
PDF描述
Z8L38210ASC 32-Bit Microprocessor
Z8L38210FSC 32-Bit Microprocessor
Z8PE002HZ010EC SCR Thyristor; SCR Type:Sensitive Gate; Peak Repetitive Off-State Voltage, Vdrm:400V; On-State RMS Current, IT(rms):6A; Peak Non Repetitive Surge Current, Itsm:100A; Gate Trigger Current Max, Igt:200uA
Z8PE003HZ010EC SCR Thyristor; SCR Type:Standard Gate; Peak Repetitive Off-State Voltage, Vdrm:400V; On-State RMS Current, IT(rms):20A; Peak Non Repetitive Surge Current, Itsm:300A; Gate Trigger Current Max, Igt:30uA
Z8PE003HZ010SC MICROCONTROLLER|8-BIT|Z8 CPU|CMOS|SSOP|20PIN|PLASTIC
相關代理商/技術參數
參數描述
Z8ICE001ZEM 功能描述:仿真器/模擬器 Z8PLUS Emulator RoHS:否 制造商:Blackhawk 產品:System Trace Emulators 工具用于評估:C6000, C5000, C2000, OMAP, DAVINCI, SITARA, TMS470, TMS570, ARM 7/9, ARM Cortex A8/R4/M3 用于:XDS560v2
Z8L180 制造商:ZILOG 制造商全稱:ZILOG 功能描述:Family MPU
Z8L18006FEC 制造商:ZILOG 制造商全稱:ZILOG 功能描述:ENHANCED Z180 MICROPROCESSOR
Z8L18006FSC 制造商:ZILOG 制造商全稱:ZILOG 功能描述:ENHANCED Z180 MICROPROCESSOR
Z8L18006PEC 制造商:ZILOG 制造商全稱:ZILOG 功能描述:ENHANCED Z180 MICROPROCESSOR
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*