- 您現在的位置：買賣IC網 > PDF目錄376460 > XRT16L2552 (Exar Corporation) 2.25V TO 5.5V DUART WITH 16-BYTE FIFO PDF資料下載
參數資料
| 型號： | XRT16L2552 |
| 廠商： | Exar Corporation |
| 英文描述： | 2.25V TO 5.5V DUART WITH 16-BYTE FIFO |
| 中文描述： | 2.25V至5.5V的杜阿爾特16字節FIFO |
| 文件頁數： | 24/47頁 |
| 文件大?。?/td> | 413K |
| 代理商： | XRT16L2552 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁當前第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁
XR16L2552
2.25V TO 5.5V DUART WITH 16-BYTE FIFO
xr
REV. 1.1.1
24
4.4.2
When FCR BIT-0 equals a logic 1 for FIFO enable; resetting IER bits 0-3 enables the XR16L2552 in the FIFO
polled mode of operation. Since the receiver and transmitter have separate bits in the LSR either or both can
be used in the polled mode by selecting respective transmit or receive control bit(s).
A.
LSR BIT-0 indicates there is data in RHR
or
RX FIFO.
B.
LSR BIT-1 indicates an overrun error has occurred and that data in the FIFO may not be valid.
C.
LSR BIT 2-4 provides the type of receive data errors encountered for the data byte in RHR, if any.
D.
LSR BIT-5 indicates transmit FIFO is empty.
E.
LSR BIT-6 indicates when both the transmit FIFO and TSR are empty.
F.
LSR BIT-7 indicates a data error in at least one character in the RX FIFO.
IER[0]: RHR Interrupt Enable
The receive data ready interrupt will be issued when RHR has a data character in the non-FIFO mode
or when
the receive FIFO has reached the programmed trigger level in the FIFO mode.
Logic 0 = Disable the receive data ready interrupt (default).
Logic 1 = Enable the receiver data ready interrupt.
IER[1]: THR Interrupt Enable
This bit enables the Transmit Ready interrupt which is issued whenever the TX FIFO becomes empty.
Logic 0 = Disable Transmit Ready interrupt (default).
Logic 1 = Enable Transmit Ready interrupt.
IER[2]: Receive Line Status Interrupt Enable
If any of the LSR register bits 1, 2, 3 or 4 is a logic 1, it will generate an interrupt to inform the host controller
about the error status of the current data byte in FIFO. LSR bit-1 generates an interrupt immediately when the
character has been received. LSR bits 2-4 generate an interrupt when the character with errors is read out of
the FIFO.
Logic 0 = Disable the receiver line status interrupt (default).
Logic 1 = Enable the receiver line status interrupt.
IER[3]: Modem Status Interrupt Enable
Logic 0 = Disable the modem status register interrupt (default).
Logic 1 = Enable the modem status register interrupt.
IER versus Receive/Transmit FIFO Polled Mode Operation
IER[4]: Sleep Mode Enable (requires EFR bit-4 = 1)
Logic 0 = Disable Sleep Mode (default).
Logic 1 = Enable Sleep Mode. See Sleep Mode section for further details.
IER[5]: Xoff Interrupt Enable (requires EFR bit-4=1)
Logic 0 = Disable the software flow control, receive Xoff interrupt. (default)
Logic 1 = Enable the software flow control, receive Xoff interrupt. See Software Flow Control section for
details.
IER[6]: RTS# Output Interrupt Enable (requires EFR bit-4=1)
Logic 0 = Disable the RTS# interrupt (default).
Logic 1 = Enable the RTS# interrupt. The UART issues an interrupt when the RTS# pin makes a transition
from low to high.
相關PDF資料 |
PDF描述 |
|---|---|
| XRT3591 | SINGLECHIP V. 35 TRANSCEIVER |
| XRT3591B | SINGLECHIP V. 35 TRANSCEIVER |
| XRT3591BID | SINGLECHIP V. 35 TRANSCEIVER |
| XRT3591BIP | SINGLECHIP V. 35 TRANSCEIVER |
| XRT4000 | Universal Multiprotocol Serial Interface |
相關代理商/技術參數 |
參數描述 |
|---|---|
| XRT2588CN | 制造商:Exar Corporation 功能描述: |
| XR-T2713CP | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Subscriber Line Metering/Monitoring Circuit |
| XR-T3588 | 制造商:EXAR 制造商全稱:EXAR 功能描述:V.35 Interface Receiver/Transmitter |
| XR-T3588-89ES | 制造商:EXAR 制造商全稱:EXAR 功能描述:XR-T3588/89 Evaluation System |
| XRT3588CN | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:IC-INTERFACE TRANSMITTER |
發布緊急采購，3分鐘左右您將得到回復。