參數資料
型號: TLV986CPFB
廠商: TEXAS INSTRUMENTS INC
元件分類: 模擬信號調理
英文描述: SPECIALTY ANALOG CIRCUIT, PQFP48
封裝: PLASTIC, TQFP-48
文件頁數: 5/20頁
文件大?。?/td> 266K
代理商: TLV986CPFB
TLV986
3-V, 10-BIT, 12.5 MSPS, AREA CCD SENSOR PROCESSOR
SLAS228 – JULY 1999
13
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
PRINCIPLES OF OPERATION
CDS/PGA signal processor
The output from the CCD sensor is first fed to a correlated double sampler (CDS). The CCD signal is sampled
and held during the reset reference interval and the video signal interval. By subtracting two resulting voltage
levels, the CDS removes low frequency noise from the output of the CCD sensor and obtains the voltage
difference between the CCD reference level and the video level of each pixel. Two sample/hold control pulses
(SR and SV) are required to perform the CDS function.
The CCD output is capacitively coupled to the TLV986. The ac coupling capacitor is clamped to establish proper
dc bias during the dummy pixel interval by the CLAMP input. The bias at the input to the TLV986 is set to 1.2
V. Normally, the CLAMP is applied at sensor’s line rate. Connect a capacitor with a value ten times larger than
the input ac coupling capacitor between the CLREF terminal and the AGND.
When operating the TLV986 at its maximum speed, the CCD internal source resistance should be less than
50
. Otherwise, the CCD output buffering is required.
The signal is sent to the PGA after the CDS function is complete. The PGA gain is adjustable from 0 to 36 dB
by programming the internal gain register via the serial port. The PGA is digitally controlled with 9-bit resolution
on a linear dB scale, resulting in a 0.09 dB gain step. The gain can be expressed by the following equation,
Gain = PGA code
× 0.09375 dB
Where: PGA code has a range of 0 to 383
For example, If PGA code = 64, then the PGA Gain = 6 db (or gain of 2)
The TLV986 has direct access to the PGA outputs through the TPP terminal and the TPM terminal. See
Test
Register Description for details.
ADC
The ADC employs a pipelined architecture to achieve high throughput and low power consumption. Fully
differential implementation and digital error correction ensure 10-bit resolution.
The latency of the ADC data output is 4.5 ADCCLK cycles as shown in Figure 1. Pulling OE (terminal 24) high
puts the ADC output in high impedance.
user DACs
The TLV986 includes two user DACs that can be used for external analog settings. The output voltage of each
DAC can be independently set and has a range of 0 V to the supply voltage with 8-bit resolution. When the user
DACs are not in use in a camera system, they can be put in the standby mode by programming control bits in
the control register.
相關PDF資料
PDF描述
TLX-1741-C3B TLX-1741-C3B
TM164ABA LCD MODULE
TM400DZ-H 628 A, SCR
TMC-4B28 High power VCSEL TO-46 metal for general purpose
TMC2301G8C2 12-BIT, DSP-VIDEO IMAGING, CPGA68
相關代理商/技術參數
參數描述
TLV986PFB 制造商:TI 制造商全稱:Texas Instruments 功能描述:3-V, 10-BIT, 12.5 MSPS, AREA CCD SENSOR PROCESSOR
TLV987 制造商:TI 制造商全稱:Texas Instruments 功能描述:3-V 10-BIT 27 MSPS AREA CCD SENSOR SIGNAL PROCESSOR
TLV987CPFB 功能描述:IC 10-BIT CCD PROCESSOR 48-TQFP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模擬前端 (AFE) 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 位數:- 通道數:2 功率(瓦特):- 電壓 - 電源,模擬:3 V ~ 3.6 V 電壓 - 電源,數字:3 V ~ 3.6 V 封裝/外殼:32-VFQFN 裸露焊盤 供應商設備封裝:32-QFN(5x5) 包裝:帶卷 (TR)
TLV987PFB 制造商:TI 制造商全稱:Texas Instruments 功能描述:3-V 10-BIT 27 MSPS AREA CCD SENSOR SIGNAL PROCESSOR
TLV990 制造商:TI 制造商全稱:Texas Instruments 功能描述:3-V, 10-BIT, 28-MSPS AREA CCD AND VIDEO SIGNAL PROCESSOR