參數資料
型號: TLE6280GP
廠商: INFINEON TECHNOLOGIES AG
英文描述: 3-Phase Bridge Driver IC
中文描述: 三相橋驅動器集成電路
文件頁數: 6/24頁
文件大小: 821K
代理商: TLE6280GP
Datasheet TLE6280GP
The size of the C
Bxx
and C
CP
capacitors depends upon the gate charge of the Mosfet.
(See “output stages”). C
CP
is usually 6 times larger then C
Bxx
.
Dead Time and Shoot through option.
In bridge applications it has to be assured that the external high-side and low-side Mosfets
are not “on” at the same time, such that the battery voltage is directly connected to GND.
This is usually assured by the integration of delays in a driver IC, generating a so-called
dead time between switching off the external Mosfet and switching on the other Mosfet of the
same half-bridge.
The dead times generated in the TLE6280GP are adjustable. The dead time generated by
the TLE6280GP can be varied from 100ns to 4μs by connecting an external resistor from the
DT pin to GND. The dead time has to be long enough to avoid a short between battery and
GND, while the dead time should be as short as possible to reduce extra power dissipation
in the external Mosfets.
In addition to this adjustable delay, the TLE6280GP provides a locking mechanism, prevent-
ing both external Mosfets of one half-bridge from being switched on at the same time. This
functionality is called shoot through protection.
If the command to switch on both high and low-side switches in the same half-bridge is given
at the input pins, the command will be ignored. (See dead time diagrams, fig. 6-8)
This shoot through protection can be deactivated by setting the MFP-pin to 5V.
Short circuit protection / current limitation
The TLE6280GP provides a short circuit protection for the external Mosfets, by monitoring
the Drain-Source voltage of the external Mosfets. As soon as this voltage is higher than the
short circuit detection limit, the Gate-Source voltage of this Mosfet will be limited to twice the
voltage at the MFP-Pin, providing a current limitation.
The short circuit detection level is dependent upon the voltage of the MFP pin as well (see
diagrams).
After a delay of about 11μs all external Mosfets will be switched off until the driver is reset by
the MFP pin. The error flag is set.
The Drain-Source voltage monitoring of the short circuit detection for certain external Mos-
fets is active as soon as the corresponding input is set to “on” and the dead time is expired.
This feature provides a 2-step switch-on behavior for each regular switching-on of a Mosfet.
Description of MFP pin (Multi functional pin)
The MFP pin has multiple tasks:
1) Reset the device.
2) Adjust the short circuit detection level of the external Mosfet and define the gate voltage
limitation for current limitation in case of short circuit
3) Deactivate the shoot-through protection
Fig 4. shows the internal structure of the MFP pin.
Condition of MFP pin
Function
0 – 1.1V
Disable the driver. All external Mosfets will be actively
switched off
2.5 – 4.0 V
Adjustable short circuit detection level combined with adjust-
able gate voltage limitation for current limitation. Shoot-
through protection is active.
> 4.5V
Shoot-through protection deactivated.
6
2004-03-31
相關PDF資料
PDF描述
TLE6285 LIN-Transceiver LDO
TLE6285G LIN-Transceiver LDO
TLE6286 LIN-Transceiver LDO
TLE6286G LIN-Transceiver LDO
TLE6288 Smart 6 Channel Peak&Hold Switch
相關代理商/技術參數
參數描述
TLE6280GPAUMA1 制造商:Infineon Technologies AG 功能描述:3-Phase Bridge Driver 36-Pin DSO T/R 制造商:Infineon Technologies AG 功能描述:DRIVER_IC - Tape and Reel
TLE6280GPAUMA2 制造商:Infineon Technologies AG 功能描述:3-Phase Bridge Driver T/R 制造商:Infineon Technologies AG 功能描述:3-Phase Bridge Driver 36-Pin DSO T/R 制造商:Infineon Technologies AG 功能描述:DRIVER_IC - Tape and Reel
TLE6280GPCUMA1 制造商:Infineon Technologies AG 功能描述:DRIVER_IC - Tape and Reel
TLE6280GPNT 制造商:Infineon Technologies AG 功能描述:3-Phase Bridge Driver 36-Pin DSO
TLE6280GP-T 功能描述:功率驅動器IC GATE DRIVER ICS FOR EXTERNAL MOSFETS RoHS:否 制造商:Micrel 產品:MOSFET Gate Drivers 類型:Low Cost High or Low Side MOSFET Driver 上升時間: 下降時間: 電源電壓-最大:30 V 電源電壓-最小:2.75 V 電源電流: 最大功率耗散: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8 封裝:Tube