參數資料
型號： TDA4887
廠商： NXP Semiconductors N.V.
英文描述： 160 MHz bus-controlled monitor video preamplifier
中文描述： 160 MHz的總線控制顯示器的視頻前置放大器
文件頁數： 8/68頁
文件大?。?/td> 425K
代理商： TDA4887
2001 Oct 19
8
Philips Semiconductors
Product specification
160 MHz bus-controlled monitor video
preamplifier
TDA4887PS
7
FUNCTIONAL DESCRIPTION
Referalso toblock diagram (Fig.1)and definitions of levels
and signals (Chapter 10).
7.1
Signal input stage
The RGB input signals are capacitively coupled into the
TDA4887PS from a low-ohmic source (75
recommended) and actively clamped to the internal
reference black level during signal black level. The signal
amplitude is 0.7V
i(b-w)
and should not exceed 1 V. The
high-ohmic input impedance of the TDA4887PS allows the
coupling capacitor to be relatively small (10 nF
recommended).Thecouplingcapacitoralsofunctionsasa
storage capacitor between clamping pulses. Very small
input currents will discharge the coupling capacitor
resulting in black output signals for missing input clamping
pulses.
Composite signals will not disturb normal operation
because a clipping circuit cuts all signal parts below black
level.
A fast signal blanking circuit included in the input stage is
driven by several blanking pulses (see Section 7.6) and
control bit DISV = 1. During the off condition the internal
reference black level is inserted instead of the input
signals.
7.2
Electronic potentiometer stages
7.2.1
C
ONTRAST CONTROL
The contrast control is driven by an 8-bit DAC via the
I
2
C-bus. The input signals related to the internal reference
black level can be adjusted simultaneously by contrast
control with a control range of 32 dB (typical). The nominal
setting is for maximum contrast.
B
RIGHTNESS CONTROL
7.2.2.1
Brightness control with grey scale tracking
The brightness control is driven by an 8-bit DAC via the
I
2
C-bus; brightness control with grey scale tracking is
selected when control bit BRI = 0.
With brightness control, the video black level is shifted in
relation to the reference black level simultaneously for all
three channels. With a negative setting (up to 10% of the
maximum signal amplitude) dark signal parts will be lost in
ultrablack;forpositivesettings(upto33%ofthemaximum
signal amplitude) the background will alter from black to
grey. At nominal brightness setting (40H) there is no shift.
ThebrightnesssettingisalsovalidforOSDsignals.During
blanking and output clamping the video black level will be
blanked to the reference black level (brightness blanking).
The brightness information is inserted before the gain
potentiometers, background colour temperature will not
change with brightness setting (grey scale tracking).
7.2.2.2
Brightness control without grey scale tracking
Brightness control without grey scale tracking is selected
when control bit BRI = 1.
The brightness information will be mixed with the DAC
outputs for external black level restoration (FPOL = 1,
AC-coupled cathodes) or internal feedback reference
voltages (FPOL = 0, DC-coupled cathodes). This allows a
simplebus-controlledbrightnesssettingwithoutgreyscale
tracking. With AC-coupled cathodes this is equivalent to
brightness control via grid G1.
7.2.3
G
AIN CONTROL AND GREY SCALE TRACKING
The gain control is driven by an 8-bit DAC via the I
2
C-bus.
Gain control is used for white point adjustment (correction
for different voltage-to-light amplification of the three
colour channels) and therefore individually for R, G and B.
The video signals related to the reference black level can
be gain-controlled within a range of 14 dB (typical). This
range is large enough to accommodate the maximum
output amplitude for different applications. The nominal
setting is maximum gain. The gain setting is also valid for
OSD signals and brightness shift (BRI = 0), therefore the
complete ‘grey scale’ is effected by gain control.
7.3
Output stage
In the output stage the nominal input signal will be
amplified to provide a 4.6 V (typical) output colour signal at
maximumcontrastandmaximumgainsettings.Reference
or pedestal black levels are adjusted by output clamping.
In order to achieve fast rise and fall times of the output
signals with minimum crosstalk between the channels,
each signal stage has its own supply voltage pin.
相關PDF資料
PDF描述
TDA4887PS 160 MHz bus-controlled monitor video preamplifier
TDA5140 Transient Voltage Suppressor Diodes
TDA5144ATD Transient Voltage Suppressor Diodes
TDA5200 surface mount silicon Zener diodes
TDA5201 ASK Single Conversion Receiver
相關代理商/技術參數
參數描述
TDA4887PS 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:160 MHz bus-controlled monitor video preamplifier
TDA4916GG 功能描述:其他電源管理 SMPS IC with MOSFET Drvr Output RoHS:否 制造商:Texas Instruments 輸出電壓范圍: 輸出電流:4 mA 輸入電壓范圍:3 V to 3.6 V 輸入電流: 功率耗散: 工作溫度范圍:- 40 C to + 110 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-48 封裝:Reel
TDA4916GGHUMA1 制造商:Infineon Technologies AG 功能描述:Switch Mode Power Supply 24-Pin DSO 制造商:Infineon Technologies AG 功能描述:IC SMPS W/ MOSFET OUTPUT PDSO-24
TDA4916GGNT 制造商:Infineon Technologies AG 功能描述:Switch Mode Power Supply 24-Pin DSO
TDA4918 制造商:未知廠家 制造商全稱:未知廠家 功能描述:開關電源控制IC
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*