
TB1261F/TB1262F
2002-6-30 42 / 66
Note
Items/Symbols
Bus conditions
Measurement methods
C5
APC Control
Sensitivity
(4.43MHz)
/ β443
APC Control
Sensitivity
(3.58MHz)
/ β358
Color
System:
4/2
Others: Preset
(1) Connect Pin61 to GND via a 1uF capacitor.
(2) Set Color System to 4(443PAL).
(3) Adjust Pin7 voltage so that the Pin34 output frequency is
4.433619MHz that is V4APCCEN.
(4) Measure the Pin34 output frequency when Pin7 voltage is
V4APCCEN+200mV / V4APCCENT, that is F4APC+ / F4APC-.
(5) Calculate; "β443"=(F4APC+-F4APC-)/200
(6) Set Color System to 2 (358NTSC).
(7) Adjust Pin7 voltage so that the Pin34 output frequency is
3.579545MHz that is V3APCCEN.
(8) Measure the Pin34 output frequency when Pin7 voltage is
V3APCCEN+200mV / V3APCCEN, that is F3APC+ / F3APC-.
(9) Calculate;
"β358"=(F3APC+-F3APC-)/200
C6
PAL ID Sensitivity
(Normal Mode)
/ VPALIDON
/ VPALIDOFF
PAL ID Sensitivity
(Low Mode)
/ VPALIDLON
/ VPALIDLOFF
NTSC ID Sensitivity
(Normal Mode)
/ VNTIDON
/ VNTIDOFF
NTSC ID Sensitivity
(Low Mode)
/ VNTIDLON
/ VNTIDLOFF
P/N ID Sens:0/1
Color System:
4/2
Y Mute:01
Uni-Color:127
RGB Mute:0
BPF/TOF;0 BPF
Others: Preset
(1) Set P/N ID Sens. to 0.
(2) Set Color System to 4(443PAL).
(3) Input a 4.43MHz PAL rainbow color-bar(300mV(p-p),
burst:chroma=1:1) with sync into pin#61 and 58.
(4) Measure the burst amplitude at which Pin13 DC level
changes from high to low / from low to high, that is
"VPALIDON" / "VPALIDOFF".
(5) Set Color System to 2(358NTSC).
(6) Input a 3.58MHz NTSC rainbow color-bar (286mV(p-p),
burst:chroma=1:1) with sync into pin#61 and 58, and
repeat (3), that is "VNTIDON" / "VNTIDOFF".
(7) Set P/N ID Sens.to 1, repeat (2) ~ (6) that are
“VPALIDLON”, “VPALIDLOFF”, VNTIDLON and
VNTIDLOFF.
C7
Black adjustment
(internal)
/ VBINTMAX
/ VRINTMAX
/ VRINTMIN
Black adjustment
sensitivity (Internal)
/ΔVBINT
/ΔVRINT
B-Y black Adj.:
0/15
R-Y black Adj.:
0/15
Others: Preset
(1) For B-Y/R-Y Black Adj.:8, measure the DC level of picture
period at Pin51,52 that is VSBCEN / VSRCEN.
(2) For B-Y Black Adj.:0 /15, measure the DC level change of
picture period against VSBCEN at Pin52, that is "VBINTMIN" /
"VBINTMAX".
(3) For R-Y Black Adj.:0/15, measure the DC level change of
picture period against VSRCEN at Pin51, that is "VRINTMIN" /
VRINTMAX ".
(4) Calculate;
"ΔVBINT "=(VSBMAX-VSBMIN)/15
"ΔVRINT "=(VSRMAX - VSRMIN)/15
Black adjustment
(External)
/ VBINTMAX
/ VRINTMAX
/ VRINTMIN
Black adjustment
sensitivity External
/ΔVBINT
/ΔVRINT
B-Y black Adj.:
0/15
R-Y black Adj.:
0/15
DemoP; 00
Cont; 7F
Color; 40
Ymute; 1
CbCrSW; 1
Others: Preset
(1) For B-Y/R-Y Black Adj.:8, measure the DC level of picture
period at Pin12,14 that is VSBCEN / VSRCEN.
(2) For B-Y Black Adj.:0 /15, measure the DC level change of
picture period against VSBCEN at Pin14, that is "VBEXTMIN" /
"VBEXTMAX".
(3) For R-Y Black Adj.:0/15, measure the DC level change of
picture period against VSRCEN at Pin12, that is "VREXTMIN" /
VREXTMAX ".
(4) Calculate;
"ΔVBINT "= (VBEXTMAX - VBEXTMIN) / 15
"ΔVRINT "= (VREXTMAX - VREXTMIN) / 15
C8
fsc Continuous Wave
Output Level
/ VCW
Others: Preset
(1) Input a 4.43MHz PAL rainbow color-bar (300mV(p-p),
burst:chroma=1:1) with sync into Pin61.
(2) Measure the amplitude of Pin34 output that is "VCW".
C9
SECAM CbCr output
amplitude
/ VBS
/ VRS
RGB Mute:0
Color System:5
Uni-Color:64
Y Mute:1
Others: preset
(1)Input a 75% color bar(200mV(p-p) at R ID) into Pin61..
(2) Measure the R-Y output amplitude at Pin51, that is "VRS".
(3) Measure the B-Y output amplitude at Pin52, that is "VBS".