參數資料
型號： SSTUP32866EC/S
廠商： NXP SEMICONDUCTORS
元件分類： 鎖存器
英文描述： 32866 SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PBGA96
封裝： 13.50 X 5.50 MM, 1.05 MM HEIGHT, LEAD FREE, PLASTIC, SOT-536-1, LFBGA-96
文件頁數： 20/31頁
文件大?。?/td> 538K
代理商： SSTUP32866EC/S
SSTUP32866_2
Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 02 — 14 September 2006
27 of 31
Philips Semiconductors
SSTUP32866
1.8 V DDR2-667/800 programmable registered buffer with parity
– larger than or equal to 1.27 mm, the footprint longitudinal axis is preferred to be
parallel to the transport direction of the printed-circuit board;
– smaller than 1.27 mm, the footprint longitudinal axis must be parallel to the
transport direction of the printed-circuit board.
The footprint must incorporate solder thieves at the downstream end.
For packages with leads on four sides, the footprint must be placed at a 45
° angle to
the transport direction of the printed-circuit board. The footprint must incorporate
solder thieves downstream and at the side corners.
During placement and before soldering, the package must be xed with a droplet of
adhesive. The adhesive can be applied by screen printing, pin transfer or syringe
dispensing. The package can be soldered after the adhesive is cured.
Typical dwell time of the leads in the wave ranges from 3 seconds to 4 seconds at 250
°C
or 265
°C, depending on solder material applied, SnPb or Pb-free respectively.
A mildly-activated ux will eliminate the need for removal of corrosive residues in most
applications.
13.4 Manual soldering
Fix the component by rst soldering two diagonally-opposite end leads. Use a low voltage
(24 V or less) soldering iron applied to the at part of the lead. Contact time must be
limited to 10 seconds at up to 300
°C.
When using a dedicated tool, all other leads can be soldered in one operation within
2 seconds to 5 seconds between 270
°C and 320 °C.
13.5 Package related soldering information
[1]
For more detailed information on the BGA packages refer to the
(LF)BGA Application Note (AN01026);
order a copy from your Philips Semiconductors sales ofce.
[2]
All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the
maximum temperature (with respect to time) and body size of the package, there is a risk that internal or
external package cracks may occur due to vaporization of the moisture in them (the so called popcorn
effect). For details, refer to the Drypack information in the
Data Handbook IC26; Integrated Circuit
Packages; Section: Packing Methods.
Table 16.
Suitability of surface mount IC packages for wave and reow soldering methods
Package[1]
Soldering method
Wave
Reow[2]
BGA, HTSSON..T[3], LBGA, LFBGA, SQFP,
SSOP..T[3], TFBGA, VFBGA, XSON
not suitable
suitable
DHVQFN, HBCC, HBGA, HLQFP, HSO, HSOP,
HSQFP, HSSON, HTQFP, HTSSOP, HVQFN,
HVSON, SMS
not suitable[4]
suitable
PLCC[5], SO, SOJ
suitable
LQFP, QFP, TQFP
not recommended[5][6]
suitable
SSOP, TSSOP, VSO, VSSOP
not recommended[7]
suitable
CWQCCN..L[8], PMFP[9], WQCCN..L[8]
not suitable
相關PDF資料
PDF描述
SSTV16857EC POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PBGA56
SSTV16859DGG,118 SSTV SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PDSO64
SSTV16859BS,118 SSTV SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PQCC56
SSTV16859EC,518 SSTV SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PBGA96
ST10F168-Q2 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP144
相關代理商/技術參數
參數描述
SSTV01T1 制造商:Vishay Siliconix 功能描述:SS T092 DL XSTR PNP 30V -LEAD FREE - Tape and Reel
SSTV01-T1-E3 制造商:Vishay Intertechnologies 功能描述: 制造商:Vishay Siliconix 功能描述:FIELD EFFECT TRANSISTOR
SSTV16857 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:14-bit SSTL_2 registered driver with differential clock inputs
SSTV16857_ZBA30062 WAF 制造商:Fairchild Semiconductor Corporation 功能描述:
SSTV16857_ZBA31162 WAF 制造商:Fairchild Semiconductor Corporation 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*