參數資料
型號： SDA9280B22
廠商： SIEMENS A G
元件分類： 消費家電
英文描述： ICs for Consumer Electronics
中文描述： SPECIALTY CONSUMER CIRCUIT, PQCC68
文件頁數： 17/43頁
文件大?。?/td> 249K
代理商： SDA9280B22
SDA 9280 B22
Semiconductor Group
17
1998-02-01
An example of such non-harmonic distortions are periodic stripes with a frequency of
900 kHz appearing in a 4.8 MHz test pattern which is sampled with 13.5 MHz clock
frequency (2
*
4.8 MHz – (13.5 – 4.8) MHz = 900 kHz).
The ideal postfiltering comprises an ideal lowpass filter with an edge frequency at the
maximum signal frequency and a stop band rejection of at least 30 or 40 dB. In practice
the postfilter can be greatly simplified when a large transition band is allowed. For this
purpose a digital interpolator is implemented with a steep transition at the half of the
sampling frequency and an out of band rejection of more than 30 dB before
D/A conversion. Combined with a two-fold oversampling the first image appears around
twice the sampling frequency, thus leaving considerably more space for the transition
band of an analog postfilter. There is another good reason for using a digital
interpolation. Since the output frequency may vary with different compression or
expansion factors an analog filter with varying edge frequencies is necessary. This
requirement can only be fulfilled in the digital domain because the edge frequency is
linearly controlled by the sample frequency.
The amplification factor of the implemented interpolation filter is 65/64. The maximal
output clock frequency is 8/3 times of the input sample frequency. The diagram
(
figure 6
) shows the frequency response.
Oversampling can be switched off (
Ι
2
C signal: OVSAMP). Then the 4:4:4 format is
directly D/A converted. With activated oversampling it is possible to switch off
oversampling filtering (
Ι
2
C signal: OVFILT). In this operation mode the input clock
frequency is doubled but each sample is simply repeated twice.
2.8
Three different values are inserted into the video signal: black level, a colored
background area and an arbitrary colored pattern.
The blanking interval of the input signal is not processed by the compander. Therefore
the black level shifting in the luminance signal, caused by the peaking filter (coefficient
LCOF) and the amplification factor of the oversampling filter, has to be restored by
inserting the correct value (BLACK). BLACK is programmable and must be computed
according to the coding of the input data using the following formulas:
Insertion Facilities
BLACK = 128 + 65/128
*
LCOF
*
(BLACKIN – 128)
BLACK = 128 + 65/128
*
LCOF
*
BLACKIN
BLACKIN is the black level of the input signal, LCOF is the Lowpass coefficient of the
Luminance Peaking Filter: 0 ... [1/4] ... 1.5, 2
Black level insertion is controlled by the external signal HS. This signal also controls the
deflection circuit, consequently it has a stable phase referring to the horizontal blanking
interval. The value BLACK is inserted during 80 clock periods of the clock CLL. In the
Siemens MEGAVISION
System HS is supplied by the MSC-circuit. To adjust the right
insertion phase a programmable delay of HS is available (
Ι
2
C signal: HSDEL).
for positive dual coding
for 2’s complement
相關PDF資料
PDF描述
SDA9290-5 Picture Processor
SDA9361 DDC-PLUS-Deflection Controller
sda 9361 DDC-PLUS-Deflection Controller(DDC 過偏轉控制器)
SDA9380-B21 EDDC Enhanced Deflection Controller and RGB Processor
SDA9388X Single-Chip Picture in Picture IC
相關代理商/技術參數
參數描述
SDA9288 制造商:未知廠家 制造商全稱:未知廠家 功能描述:畫ˉ中畫/畫外畫處理集成電
SDA9288X 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:Single Chip PIP System
SDA9288XE-B121 制造商:Siemens 功能描述:PICTURE-IN-PICTURE IC, PDSO32
SDA9290-5 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:Picture Processor
SDA9290-6 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:Picture Processor
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*