參數資料
型號: SAB88C166W-5M
廠商: SIEMENS A G
元件分類: 微控制器/微處理器
英文描述: 16-Bit CMOS Single-Chip Microcontrollers with/without oscillator prescaler with 32 KByte Flash EPROM
中文描述: 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
文件頁數: 9/58頁
文件大小: 611K
代理商: SAB88C166W-5M
SAB 88C166(W)
Semiconductor Group
8
Memory Organization
The memory space of the SAB 88C166(W) is configured in a Von Neumann architecture which
means that code memory, data memory, registers and I/O ports are organized within the same
linear address space which includes 256 KBytes. Address space expansion to 16 MBytes is
provided for future versions. The entire memory space can be accessed bytewise or wordwise.
Particular portions of the on-chip memory have additionally been made directly bit addressable.
1 KByte of on-chip RAM is provided as a storage for user defined variables, for the system stack,
general purpose register banks and even for code. A register bank can consist of up to 16 wordwide
(R0 to R15) and/or bytewide (RL0, RH0, …, RL7, RH7) so-called General Purpose Registers
(GPRs).
512 bytes of the address space are reserved for the Special Function Register area. SFRs are
wordwide registers which are used for controlling and monitoring functions of the different on-chip
units. 98 SFRs are currently implemented. Unused SFR addresses are reserved for future
members of the SAB 80C166 family.
In order to meet the needs of designs where more memory is required than is provided on chip, up
to 256 KBytes of external RAM and/or ROM can be connected to the microcontroller.
Flash Memory Overview
The SAB 88C166(W) provides 32 KBytes of electrically erasable and reprogrammable non-volatile
Flash EPROM on-chip for code or constant data, which can be mapped to either segment 0
(0’0000
H
to 0’7FFF
H
) or segment 1 (1’0000
H
to 1’7FFF
H
) during the initialization phase.
A separate Flash Control Register (FCR) has been implemented to control Flash operations like
programming or erasure. For programming or erasing an external 12 V programming voltage must
be applied to the VPP/EBC1 pin.
The Flash memory is organized in 8 K x 32 bits, which allows even double-word instructions to be
fetched in just one machine cycle. The entire Flash memory is divided into four blocks with different
sizes (12/12/6/2 KByte). This allows to erase each block separately, when only parts of the Flash
memory need to be reprogrammed. Word or double word programming typically takes 100
μ
s, block
erasing typically takes 1 s (@ 20 MHz CPU clock). The Flash memory features a typical endurance
of 100 erasing/programming cycles. Erased Flash memory cells contain all ‘1’s, as known from
standard EPROMs.
The Flash memory can be programmed both in an appropriate programming board and in the target
system, which provides a lot of flexibility. The SAB 88C166(W)’s on-chip bootstrap loader may be
used to load and start the programming code.
To save the customer’s know-how, a Flash memory protection option is provided in the SAB
88C166(W). If this was activated once, Flash memory contents cannot be read from any location
outside the Flash memory itself.
相關PDF資料
PDF描述
SAB88C166 16-Bit CMOS Single-Chip Microcontrollers with/without oscillator prescaler with 32 KByte Flash EPROM
SAB88C166-5M 16-Bit CMOS Single-Chip Microcontrollers with/without oscillator prescaler with 32 KByte Flash EPROM
SAE 81C90 16-Bit Microcontroller(16位微控制器)
SAE 81C91 16-bit microcontrollers(16位微控制器)
SAF-C167CR-16F 16-Bit CMOS Single-Chip Microcontroller with 128KByte Flash EPROM
相關代理商/技術參數
參數描述
SAB9075H 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Picture-in-Picture PIP controller for NTSC
SAB9075HB-S 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Picture-in-Picture Circuit
SAB9076H 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Picture-In-Picture PIP controller
SAB9077 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Picture-In-Picture PIP controller
SAB9077H 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Picture-In-Picture PIP controller