
December 17, 2004 S29AL016D_00_A2
S29AL016D
35
P r e l i m i n a r y
Absolute Maximum Ratings
Storage Temperature
Plastic Packages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–65
°
C to + 150
°
C
Ambient Temperature
with Power Applied. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–65
°
C to + 125
°
C
Voltage with Respect to Ground
V
CC
(Note 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to + 4.0 V
A9
,
OE#
,
and
RESET# (Note 2) . . . . . . . . . . . . . . . . –0.5 V to + 12.5 V
All other pins (Note 1) . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
CC
+ 0.5 V
Output Short Circuit Current (Note 3). . . . . . . . . . . . . . . . . . . . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input or I/O pins may overshoot V
SS
to –2.0 V for periods of up to 20 ns. See
Figure 7
. Maximum DC voltage on input or I/O pins is
V
CC
+ 0.5 V. During
voltage transitions, input or I/O pins may overshoot to V
CC
+ 2.0 V for periods up to 20 ns. See
Figure 8
.
2. Minimum DC input voltage on pins A9, OE#, and RESET# is -0.5 V. During voltage transitions, A9, OE#, and
RESET# may overshoot V
SS
to –2.0 V for periods of up to 20 ns. See
Figure 7
. Maximum DC input voltage on pin
A9 is + 12.5 V which may overshoot to 14.0 V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater
than one second.
Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a
stress rating only; functional operation of the device at these or any other conditions above those indicated in the op-
erational sections of this data sheet is not implied. Exposure of the device to absolute maximum rating conditions for
extended periods may affect device reliability.
Figure 7. Maximum Negative Overshoot Waveform
Figure 8. Maximum Positive Overshoot Waveform
20 ns
20 ns
+ 0.8 V
–0.5 V
20 ns
–2.0 V
20 ns
V
CC
+ 2.0 V
V
CC
+ 0.5 V
20 ns
2.0 V