參數資料
型號： RH8053GC025512
英文描述： Microprocessor
中文描述： 微處理器
文件頁數： 15/81頁
文件大小： 598K
代理商： RH8053GC025512
Mobile Intel
Celeron Processor (0.18μ) in BGA2 and Micro-PGA2 Packages
Order Number#249563-001
Datasheet
15
until STPCLK# is deasserted. A transition to the Sleep state can be made by the assertion of the
SLP# signal.
While in the Stop Grant state, assertions of FLUSH#, SMI#, INIT#, INTR, and NMI (or
LINT[1:0]) will be latched by the processor. These latched events will not be serviced until the
processor returns to the Normal state. Only one of each event will be recognized upon return to the
Normal state.
2.2.5
Quick Start State
This is a mode entered by the processor with the assertion of the STPCLK# signal when it is
configured for the Quick Start state (via the A15# strapping option). In the Quick Start state the
processor is only capable of acting on snoop transactions generated by the system bus priority
device. Because of its snooping behavior, Quick Start can only be used in a uniprocessor (UP)
configuration.
A transition to the Deep Sleep state can be made by stopping the clock input to the processor. A
transition back to the Normal state (from the Quick Start state) is made only if the STPCLK#
signal is deasserted.
While in this state the processor is limited in its ability to respond to input. It is incapable of
latching any interrupts, servicing snoop transactions from symmetric bus masters or responding to
FLUSH# or BINIT# assertions. While the processor is in the Quick Start state, it will not respond
properly to any input signal other than STPCLK#, RESET#, or BPRI#. If any other input signal
changes, then the behavior of the processor will be unpredictable. No serial interrupt messages
may begin or be in progress while the processor is in the Quick Start state.
RESET# assertion will cause the processor to immediately initialize itself, but the processor will
stay in the Quick Start state after initialization until STPCLK# is deasserted.
2.2.6
HALT/Grant Snoop State
The processor will respond to snoop transactions on the system bus while in the Auto Halt, Stop
Grant, or Quick Start state. When a snoop transaction is presented on the system bus the processor
will enter the HALT/Grant Snoop state. The processor will remain in this state until the snoop has
been serviced and the system bus is quiet. After the snoop has been serviced, the processor will
return to its previous state. If the HALT/Grant Snoop state is entered from the Quick Start state,
then the input signal restrictions of the Quick Start state still apply in the HALT/Grant Snoop
state, except for those signal transitions that are required to perform the snoop.
2.2.7
Sleep State
The Sleep state is a very low-power state in which the processor maintains its context and the
phase-locked loop (PLL) maintains phase lock. The Sleep state can only be entered from the Stop
Grant state. After entering the Stop Grant state, the SLP# signal can be asserted, causing the
processor to enter the Sleep state. The SLP# signal is not recognized in the Normal or Auto Halt
states.
The processor can be reset by the RESET# signal while in the Sleep state. If RESET# is driven
active while the processor is in the Sleep state then SLP# and STPCLK# must immediately be
driven inactive to ensure that the processor correctly initializes itself.
相關PDF資料
PDF描述
RH8053GC029512 Microprocessor
RH8053GC033512 Microprocessor
BXYP14 BXYP14 - Waraktor
BXYP26 Octal D-type flip flop with clear
BXYP42 Quad 2-input OR gate
相關代理商/技術參數
參數描述
RH80554RC009512 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Intel 功能描述:
RH80554RC021512 制造商:Rochester Electronics LLC 功能描述: 制造商:Intel 功能描述:
RH9711 制造商:Thomas & Betts 功能描述:Ring Tongue Terminal 54.35mm 19.55mm Electro-Tin
RH9731 制造商:Thomas & Betts 功能描述:Ring Tongue Terminal 54.35mm 19.55mm Electro-Tin
RH9731U 制造商:Thomas & Betts 功能描述:Ring Tongue Terminal 54.35mm 19.55mm Electro-Tin
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*