參數資料
型號： PM908E624ACDWBR2
廠商： FREESCALE SEMICONDUCTOR INC
元件分類： 微控制器/微處理器
英文描述： 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDSO54
封裝： PLASTIC, SOIC-54
文件頁數： 15/24頁
文件大?。?/td> 718K
代理商： PM908E624ACDWBR2
908E624
MOTOROLA ANALOG INTEGRATED CIRCUIT DEVICE DATA
22
Table 4. Control Bits Function (Write Operation)
Table 5. Control Bits Function (Read Operation)
HSxON—High-Side x Enable Bit
This bit enables HSx. Reset clears the HSx bit.
1 = HSx switched on (refer to Note below).
0 = HSx switched off.
Note If no PWM on HS1 and HS2 is required, the PWMIN
terminal must be connected to the VDD terminal.
LIN-PU—LIN Pull-UP Enable Bit
This bit controls the LIN pull-up resistor during SLEEP and
STOP modes.
1 = Pull-up disconnected in SLEEP and STOP modes.
0 = Pull-up connected in SLEEP and STOP modes.
Note This bit is only available on the final product. All
versions before MC-Qualification will not include this function.
LINSL1 and LINSL2—LIN Baud Rate and Low-Power Mode
Selection Bits
These bits select the LIN slew rate and requested low-power
mode in accordance with Table 6. Reset clears the LINSL1 and
LINSL2 bits.
Table 6. LIN Baud Rate and Low-Power Mode
Selection Bits
L1—Input L1 Status Flag Bit
This flag reflects the status of the L1 input terminal and
indicates the wake-up source.
1 = L1 input high or wake-up by L1 (first register read after
wake-up indicated with INT SOURCE = 1).
0 = L1 input low.
L2—Input L2 Status Flag Bit
This flag reflects the status of the L2 input terminal and
indicates the wake-up source.
1 = L2 input high or wake-up by L2 (first register read after
wake-up indicated with INT SOURCE = 1).
0 = L2 input low.
HSST—High-Side Status Flag Bit
This flag is set on overtemperature conditions on one of the
high-side outputs.
1 = HSx off due to overtemperature.
0 = No overtemperature.
VDDT—Voltage Regulator Status Flag Bit
This flag is set as pre-warning in case of an over-
temperature condition on the voltage regulator.
1 = Voltage regulator overtemperature condition, pre-
warning.
0 = No overtemperature detected.
VSUV/BATFAIL—Undervoltage Status Flag Bit
This flag is set on a VSUP undervoltage condition.
1 = Undervoltage detected. VSUP below 6.0 V
0 = No undervoltage detected. VSUP above 6.0 V.
VSOV—Overvoltage Status Flag Bit
This flag is set on a VSUP overvoltage condition.
1 = Overvoltage detected, VSUP above 19 V.
0 = No overvoltage detected, VSUP below 18 V.
LINWU/LINFAIL—LIN Status Flag Bit
This bit indicates a LIN wake-up condition.
1 = LIN bus wake-up occurred or LIN over- current/
temperature occurred.
0 = No LIN bus wake-up occurred.
INT SOURCE—Register Content Flags or Interrupt
This bit indicates if the register contents reflect the flags or
the wake-up source.
1 = SPI word reflects the interrupt or wake-up source.
0 = No interrupt occurred. Other SPI bits report real time
status.
D7
D6
D5
D4
D3
D2
D1
D0
LINSL2
LINSL1
LIN-PU
HS3ON
HS2ON
HS1ON
MODE2 MODE1
D7
D6
D5
D4
D3
D2
D1
D0
INT
SOURCE
LINWU
or
LINFAIL
VSOV
VSUV
BATFAIL
VDDT
HSST
L2
L1
LINSL2
LINSL1
Description
0
Baud Rate up to 20 kbps (normal)
0
1
Baud Rate up to 10 kbps (slow)
1
0
Fast Program Download
Baud Rate up to 100 kbps
1
Low-Power Mode (SLEEP or STOP) Request
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
..
.
相關PDF資料
PDF描述
PN2221 800 mA, 30 V, NPN, Si, SMALL SIGNAL TRANSISTOR, TO-92
PN2222 800 mA, 30 V, NPN, Si, SMALL SIGNAL TRANSISTOR, TO-92
PN2906 600 mA, 40 V, PNP, Si, SMALL SIGNAL TRANSISTOR, TO-92
PN2906ALEADFREE 600 mA, 60 V, PNP, Si, SMALL SIGNAL TRANSISTOR, TO-92
PN2906LEADFREE 600 mA, 40 V, PNP, Si, SMALL SIGNAL TRANSISTOR, TO-92
相關代理商/技術參數
參數描述
PM909 制造商:Pro'skit 功能描述:6'' Long Nose Pliers
PM9090/001 功能描述:測試探頭 SCOPEMETER PROBE RoHS:否 制造商:Teledyne LeCroy 設備類型:Passive Probes 帶寬:500 MHz 尖端類型: 長度:1.3 mm 顏色:Black 電壓額定值: 電流額定值:
PM9091/001 功能描述:測試引線 1.5M (5FT) SAFETY RoHS:否 制造商:Pomona Electronics 設備類型:Patch Cords 連接器類型:Banana plug (stackable) on both ends 長度:60 in 顏色:Black
PM9092/001 功能描述:測試引線 0.5M (1.5FT) SFTY RoHS:否 制造商:Pomona Electronics 設備類型:Patch Cords 連接器類型:Banana plug (stackable) on both ends 長度:60 in 顏色:Black
PM9093/001 功能描述:測試接頭 SAFETY DESIGNED BN RoHS:否 制造商:Murata 連接器類型: 設備類型: 顏色: 觸點材料:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*