
8xC251TB/TQ HIGH-PERFORMANCE CHMOS MICROCONTROLLER
12
6.0
ELECTRICAL CHARACTERISTICS
ABSOLUTE MAXIMUM RATINGS
Storage Temperature .................................. -65°C to +150°C
Voltage: EA# Pin with respect to VSS
0 V to +13.0 V
Voltage: Any other Pin with respect to VSS
-0.5 V to +6.5 V
IOL per I/O Pin...............................................................15 mA
Power Dissipation ......................................................... 1.5 W
OPERATING CONDITIONS
TA (Ambient Temperature Under Bias):
Commercial ................................................. 0°C to +70°C
Express........................................................... -40°C to +85°C
VCC (Digital Supply Voltage) ............................ 4.5 V to 5.5 V
VSS
0 V
NOTE:Maximum power dissipation is based on
package heat-transfer limitations, not device power
consumption.
NOTICE:This document contains information on
products being sampled or in the initial production
phase of development. Verify with your local Intel
sales office that you have the latest datasheet
before finalizing a design.
WARNING: Stressing the device beyond the
“Absolute Maximum Ratings” may cause
permanent damage. These are stress ratings only.
Operation beyond the “Operating Conditions” is not
recommended and extended exposure beyond the
“Operating Conditions” may affect device
reliability.
6.1
D.C. Characteristics
Parameter values apply to all devices unless otherwise indicated.
.............
...
...................................................................................
Table 9. DC Characteristics at VCC = 4.5 – 5.5 V (Sheet 1 of 2)
Symbol
Parameter
Min
Typical
Max
Units
Test Conditions
VIL
Input Low Voltage
(except EA#)
-0.5
0.2 VCC – 0.1
V
VIL1
Input Low Voltage
(EA#)
0
0.2 VCC – 0.3
V
VIH
Input High Voltage
(except XTAL1, RST)
0.2 VCC + 0.9
VCC + 0.5
V
VIH1
Input High Voltage
(XTAL1, RST)
0.7 VCC
VCC + 0.5
V
VOL
Output Low Voltage
(Port 1, 2, 3)
0.3
0.45
1.0
V
IOL = 100 A
IOL = 1.6 mA
IOL = 3.5 mA
(Note 1, Note 2)
VOL1
Output Low Voltage
(Port 0, ALE, PSEN#)
0.3
0.45
1.0
V
IOL = 200 A
IOL = 3.2 mA
IOL = 7.0 mA
(Note 1, Note 2)
VOH
Output High Voltage
(Port 1, 2, 3, ALE,
PSEN#)
VCC – 0.3
VCC – 0.7
VCC – 1.5
V
IOH = -10 A
IOH = -30 A
IOH = -60 A
(Note 3)