
P800 Operating Manual
7
2 Local Operation
All functions are menu driven. Use the
↑
and
↓
keys to select the required option, then
press ENTER.
The option which will be selected is always the 2nd row on the display. This is indicated by
the arrows formed in the display surround.
To abort from the menu:
!
EXIT
. (The pointing finger symbol denotes a dedicated function key press).
2.1 Device Selection
!
DEV
Once DEV has been pressed the device code may be entered directly using 0-9, A-F. To
edit the code use the
←
and
→
keys. When correct press ENTER.
Or
use the
↑
and
↓
keys to select the required manufacturer, then press ENTER. Now use the
←
and
→
keys to select the required family or size of device, then the
↑
and
↓
keys for the
exact device, finally press ENTER.
When selecting a new device, the bit mode may change, the device limits will be reset to
default values, and the security setting will be reset to unprogrammed.
2.2 Device Functions
Device functions will first perform a reverse part check to ensure that the devices are the
correct way round. If a part is faulty it may also fail this test. If this passes, a connect test is
performed, to ensure that devices are present in the correct sockets.
See the marking on the module for correct orientation of the package.
DIL devices should be inserted towards the front of the ZIF with pin 1 towards the rear
of the machine.
!
Before a device function is executed the user should ensure that all devices are
the same as the device selected. (See also Section
2.4.3
Electronic Identifier)
DIL devices should be inserted into the socket with the ZIF handle up; the handle should
then be lowered. The handle should be raised before the part is removed.
!
If the BUSY LED is red, parts must not be inserted into the sockets on that
module (see section
1.5
Modules)