參數資料
型號： P800-EU
英文描述： P800 PROGRAMMER (EU)
中文描述： P800的程序員（歐盟）
文件頁數： 12/36頁
文件大?。?/td> 230K
代理商： P800-EU
P800 Operating Manual
11
In the case of 16-bit wide devices all 8 sockets will program with the same data. Two bytes
of RAM are required for each device word, and the order in which these are stored is (by
default) high byte first, low byte last. This default may be modified by the user (see section
2.3
above). Loading is done from socket 1.
2.3.5 16-bit 2of2 (2 sets of 2 parts)
This mode is available for 16 bit wide parts only.
In 2of2 set mode data in the RAM is stored in two blocks, one block for sockets 1 and 3,
followed by one block for sockets 2 and 4. The block size is the size of the device selected.
- Sockets 1 and 3 will program/verify with data starting at RAM START.
- Sockets 2 and4 will program/verify with data starting at (RAM START + device size).
Loading will over write any existing data in the RAM for all sockets. Devices are required in
sockets 1 and 2.
2.3.6 16-bit 1of4 (1 set of 4 parts)
For 8-bit wide devices data in the RAM is stored in two blocks, one block for the socket pair
1 and 2, with the second block for the socket pair 3 and 4. The block size is twice the size of
the device selected.
- Socket 1 will program/verify with data starting at RAM START.
- Socket 2 will program/verify with data starting at (RAM START + 1).
- Socket 3 will program/verify with data starting at (RAM START + (device size x 2)).
- Socket 4 will program/verify with data starting at (RAM START + (device size x 2) +1).
Loading requires 4 devices, one in all 4 sockets.
For 16 bit parts data in the RAM is stored in four blocks, one block for each socket. The
block size is the size of the device selected.
- Socket 1 will program/verify with data starting at RAM START.
- Socket 2 will program/verify with data starting at (RAM START + device size).
- Socket 3 will program/verify with data starting at (RAM START + (device size x 2)).
- Socket 4 will program/verify with data starting at (RAM START + (device size x 3)).
Loading will over write any existing data in the RAM for all sockets. 3 or 4 devices may be
present, as long as there are devices in sockets 1, 2 and 3.
2.3.7 32-bit Gang
In 32 BIT GANG mode, groups of 32 bit data may be programmed.
For an 8-bit wide device the mapping will be as follows:
Socket
1
2
3
Image
A
B
C
The data for image A will be stored at addresses ending 0, 4, 8 and C (hex) the data for
image B will be stored at addresses ending 1, 5, 9 and D (hex), the data for image C will be
4
D
相關PDF資料
PDF描述
P800-UK P800 PROGRAMMER (UK)
P803 HIGH SPEED PRODUCTION GANG SET
P8041AH 8-BIT MICROCONTROLLER
P8242BB Peripheral IC
P8741AH 8-BIT MICROCONTROLLER
相關代理商/技術參數
參數描述
P800G 制造商:EIC 制造商全稱:EIC discrete Semiconductors 功能描述:SILICON RECTIFIER DIODES
P800GTL 制造商:SEMIKRON 制造商全稱:Semikron International 功能描述:Standard silicon rectifier diodes
P800J 制造商:EIC 制造商全稱:EIC discrete Semiconductors 功能描述:SILICON RECTIFIER DIODES
P800JTL 制造商:SEMIKRON 制造商全稱:Semikron International 功能描述:Standard silicon rectifier diodes
P800K 制造商:EIC 制造商全稱:EIC discrete Semiconductors 功能描述:SILICON RECTIFIER DIODES
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*