
Application Note P13683EJ2V0AN00
3
NESAT is an abbreviation of NEC Silicon Advanced Technology and a trademark of NEC Corporation.
The information in this document will be updated without notice.
This document outlines a typical application of this product, that is, provides a sample concept for
designing an external circuit directly required for this product. NEC only assures the quality and
characteristics of this product specified in the Data Sheet, and is not responsible for any user’s
product designs or application sets.
The peripheral circuit shown in this document is just an example prepared for evaluating the
operations of this product, and does not imply that the circuit configurations or constants are
recommended values or regulations. In addition, these circuits are not intended for any mass-
produced application sets. This is because the RF characteristics vary depending on the external
parts used, mounting patterns, and other conditions.
Therefore, it is the responsibility of the user to design the external circuit according to the user-
desired system requirements while referring to the information in this document and to use it after
confirming the characteristics on the user’s application set.
The information in this document is subject to change without notice. Before using this document,
please confirm that this is the latest version.
No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in
this document.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a device described herein or any other liability arising
from use of such device. No license, either express, implied or otherwise, is granted under any patents,
copyrights or other intellectual property rights of NEC Corporation or of others.
Descriptions of circuits, software, and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these circuits,
software, and information in the design of the customer's equipment shall be done under the full responsibility
of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third
parties arising from the use of these circuits, software, and information.
M7A 98. 8
The mark shows major revised points.