- 您現在的位置：買賣IC網 > PDF目錄98025 > MMFT3055VT3 (ON SEMICONDUCTOR) 1700 mA, 60 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET, TO-261AA PDF資料下載
參數資料
| 型號： | MMFT3055VT3 |
| 廠商： | ON SEMICONDUCTOR |
| 元件分類： | 小信號晶體管 |
| 英文描述： | 1700 mA, 60 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET, TO-261AA |
| 封裝： | CASE 318E-04, 4 PIN |
| 文件頁數： | 16/17頁 |
| 文件大?。?/td> | 193K |
| 代理商： | MMFT3055VT3 |
MMFT3055V
http://onsemi.com
635
0.8 Watts
1.25 Watts*
1.5 Watts
A, Area (square inches)
0.0
0.2
0.4
0.6
0.8
1.0
160
140
120
100
80
Figure 15. Thermal Resistance versus Drain Pad
Area for the SOT–223 Package (Typical)
Board Material = 0.0625″
G-10/FR-4, 2 oz Copper
TA = 25°C
*Mounted on the DPAK footprint
R
,
Thermal
Resistance,
Junction
to
Ambient
(C/W)
θ JA
°
Another alternative would be to use a ceramic substrate
or an aluminum core board such as Thermal Clad
t. Using
a board material such as Thermal Clad, an aluminum core
board, the power dissipation can be doubled using the same
footprint.
SOLDER STENCIL GUIDELINES
Prior to placing surface mount components onto a printed
circuit board, solder paste must be applied to the pads. A
solder stencil is required to screen the optimum amount of
solder paste onto the footprint. The stencil is made of brass
or stainless steel with a typical thickness of 0.008 inches.
The stencil opening size for the SOT–223 package should
be the same as the pad size on the printed circuit board, i.e.,
a 1:1 registration.
SOLDERING PRECAUTIONS
The melting temperature of solder is higher than the rated
temperature of the device. When the entire device is heated
to a high temperature, failure to complete soldering within
a short time could result in device failure. Therefore, the
following items should always be observed in order to
minimize the thermal stress to which the devices are
subjected.
Always preheat the device.
The delta temperature between the preheat and
soldering should be 100
°C or less.*
When preheating and soldering, the temperature of the
leads and the case must not exceed the maximum
temperature ratings as shown on the data sheet. When
using infrared heating with the reflow soldering
method, the difference shall be a maximum of 10
°C.
The soldering temperature and time shall not exceed
260
°C for more than 10 seconds.
When shifting from preheating to soldering, the
maximum temperature gradient shall be 5
°C or less.
After soldering has been completed, the device should
be allowed to cool naturally for at least three minutes.
Gradual cooling should be used as the use of forced
cooling will increase the temperature gradient and
result in latent failure due to mechanical stress.
Mechanical stress or shock should not be applied
during cooling
* Soldering a device without preheating can cause
excessive thermal shock and stress which can result in
damage to the device.
相關PDF資料 |
PDF描述 |
|---|---|
| MMFT6661T1 | 500 mA, 90 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET, TO-261AA |
| MMFT6661T3 | 500 mA, 90 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET, TO-261AA |
| MMFT960T3 | 300 mA, 60 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET, TO-261AA |
| MMPQ2222R1 | 500 mA, 30 V, 4 CHANNEL, NPN, Si, SMALL SIGNAL TRANSISTOR |
| MMPQ2222R2 | 500 mA, 30 V, 4 CHANNEL, NPN, Si, SMALL SIGNAL TRANSISTOR |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MMFT5P03HD | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:TMOS MEDIUM POWER FET 5.2 AMPERES 30 VOLTS |
| MMFT5P03HDT1 | 功能描述:MOSFET P-CH 30V 3.7A SOT223 RoHS:否 類別:分離式半導體產品 >> FET - 單 系列:- 標準包裝:1,000 系列:MESH OVERLAY™ FET 型:MOSFET N 通道，金屬氧化物 FET 特點:邏輯電平門 漏極至源極電壓(Vdss):200V 電流 - 連續漏極(Id) @ 25° C:18A 開態Rds（最大）@ Id, Vgs @ 25° C:180 毫歐 @ 9A，10V Id 時的 Vgs(th)（最大）:4V @ 250µA 閘電荷(Qg) @ Vgs:72nC @ 10V 輸入電容 (Ciss) @ Vds:1560pF @ 25V 功率 - 最大:40W 安裝類型:通孔 封裝/外殼:TO-220-3 整包 供應商設備封裝:TO-220FP 包裝:管件 |
| MMFT5P03HDT3 | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:TMOS P-CHANNEL FIELD FEECT TRANSISTOR |
| MMFT6N03HD | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:TMOS POWER 6.0 AMPERES 30 VOLTS |
| MMFT960T1 | 功能描述:MOSFET 60V 300mA N-Channel RoHS:否 制造商:STMicroelectronics 晶體管極性:N-Channel 汲極/源極擊穿電壓:650 V 閘/源擊穿電壓:25 V 漏極連續電流:130 A 電阻汲極/源極 RDS（導通）:0.014 Ohms 配置:Single 最大工作溫度: 安裝風格:Through Hole 封裝 / 箱體:Max247 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。