- 您現在的位置：買賣IC網 > PDF目錄369891 > MBRS1100TR (International Rectifier) SCHOTTKY RECTIFIER PDF資料下載
參數資料
| 型號： | MBRS1100TR |
| 廠商： | International Rectifier |
| 英文描述： | SCHOTTKY RECTIFIER |
| 中文描述： | 肖特基整流器 |
| 文件頁數： | 3/4頁 |
| 文件大?。?/td> | 77K |
| 代理商： | MBRS1100TR |
3
Rectifier Device Data
INFORMATION FOR USING THE SMB SURFACE MOUNT PACKAGE
MINIMUM RECOMMENDED FOOTPRINT FOR SURFACE MOUNTED APPLICATIONS
Surface mount board layout is a critical portion of the total
design. The footprint for the semiconductor packages must be
the correct size to insure proper solder connection interface
between the board and the package. With the correct pad
geometry, the packages will self align when subjected to a
solder reflow process.
mm
inches
0.085
2.159
0.108
2.743
0.089
2.261
MOUNTING PRECAUTIONS
The melting temperature of solder is higher than the rated
temperature of the device. When the entire device is heated
to a high temperature, failure to complete soldering within a
short time could result in device failure. Therefore, the
following items should always be observed in order to
minimize the thermal stress to which the devices are
subjected.
Always preheat the device.
The delta temperature between the preheat and soldering
should be 100
°
C or less.*
When preheating and soldering, the temperature of the
leads and the case must not exceed the maximum
temperature ratings as shown on the data sheet. When
using infrared heating with the reflow soldering method,
the difference shall be a maximum of 10
°
C.
The soldering temperature and time shall not exceed
260
°
C for more than 5 seconds.
When shifting from preheating to soldering, the maximum
temperature gradient shall be 5
°
C or less.
After soldering has been completed, the device should be
allowed to cool naturally for at least three minutes.
Gradual cooling should be used as the use of forced
cooling will increase the temperature gradient and result
in latent failure due to mechanical stress.
Mechanical stress or shock should not be applied during
cooling
* Soldering a device without preheating can cause excessive
thermal shock and stress which can result in damage to the
device.
相關PDF資料 |
PDF描述 |
|---|---|
| MBRS140LT3 | Surface Mount Schottky Power Rectifier(SMB Power Mount Power Package) |
| MBRS140LT3 | Surface Mount Schottky Power Rectifier |
| MBRS140T3 | Surface Mount Schottky Power Rectifier |
| MBRS140TR | 1 Amp Schottky Rectifier |
| MBRS1540 | Surface Mount Schottky Power Rectifier |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MBRS1100TRPBF | 功能描述:DIODE SCHOTTKY 100V 1A SMB RoHS:是 類別:分離式半導體產品 >> 單二極管/整流器 系列:- 標準包裝:100 系列:- 二極管類型:標準 電壓 - (Vr)（最大）:50V 電流 - 平均整流 (Io):6A 電壓 - 在 If 時為正向 (Vf)（最大）:1.4V @ 6A 速度:快速恢復 = 200mA（Io） 反向恢復時間(trr):300ns 電流 - 在 Vr 時反向漏電:15µA @ 50V 電容@ Vr, F:- 安裝類型:底座，接線柱安裝 封裝/外殼:DO-203AA，DO-4，接線柱 供應商設備封裝:DO-203AA 包裝:散裝 其它名稱:*1N3879 |
| MBRS1100TRPBF | 制造商:International Rectifier 功能描述:Schottky Rectifier |
| MBRS110ST3G | 制造商:ON Semiconductor 功能描述: |
| MBRS120 | 制造商:IRF 制造商全稱:International Rectifier 功能描述:SCHOTTKY RECTIFIER 1 Amp |
| MBRS120-FL | 制造商:GXELECTRONICS 制造商全稱:Gaomi Xinghe Electronics Co., Ltd. 功能描述:Low power loss,high efficiency |
發布緊急采購，3分鐘左右您將得到回復。