參數資料
型號: MA17503
廠商: Dynex Semiconductor Ltd.
英文描述: Radiation Hard MIL-STD-1750A Interrupt Unit
中文描述: 輻射硬的MIL - STD - 1750A中斷組
文件頁數: 3/34頁
文件大小: 373K
代理商: MA17503
MA17503
3/34
2.0 ARCHITECTURE
The Interrupt Unit consists of a Pending Interrupt Register,
Mask Register, Interrupt Priority Encoder, Fault Register, two
interval timers, two watchdog timers, DMA Control interface,
and both microcode and internal I/O instruction decode logic.
Details of these components are depicted in Figure 2 and are
discussed below:
2.1 PENDING INTERRUPT REGISTER
The Pending Interrupt Register (Pl) is the dedicated 16-bit
register that latches all pending interrupt requests and stores
them until serviced. The inputs to the Pl are buffered by falling-
edge detectors to prevent repeat latching of interrupt requests
held low longer than required. The Pl supports nine external
interrupts inputs and seven chip set generated interrupts. The
output of the Pl is ANDed with the Mask Register to create the
interrupt request (IRN) signal for the MA17502 Control Unit. A
one in a Pl bit position indicates an interrupt is pending and the
interrupt level is equal to the bit position.
2.2 MASK REGISTER
The Mask Register (MK) is the dedicated 16-bit register
containing the information that filters the Pl output to the Priority
Encoder and the IRN generation logic. A one in a MK bit
position allows the interrupt request, of the same bit position in
the Pl, to enter the Priority Encoder and cause IRN to drop low.
Pl bits 1 - 4 and 6 - 15 are maskable.
2.3 INTERRUPT PRIORITY ENCODER
The Interrupt Priority Encoder accepts the enabled, mask
filtered, output of the Pl and generates a four bit code
designating the level of the highest priority pending interrupt.
Level zero (Pl bit zero) has the highest priority and level 15 (Pl
bit 15) the lowest. The four bit priority code is placed on the AD
Bus during the microcoded interrupt handling routine.
2.4 FAULT REGISTER
The Fault Register (FT) is the dedicated 16-bit register that
latches the 15 specified (fault 12 is reserved) faults. The FT
supports eight external Fault inputs and three chip-set
generated Faults. The output of the FT is ORed together,
buffered by a falling-edge detector, and input to the Pl to
generate the level one interrupt. FT bits 13 - 15 are used to
indicate the results of the MAS281 BlT. Once the FT has
latched a fault, it can only be cleared via internal l/O command
(individual fault bits cannot be cleared).
Figure 1
相關PDF資料
PDF描述
MA1916 Radiation Hard Reed-Solomon & Convolution Encoder
MA28139 OBDH Bus Terminal
MA28140 Packet Telecommand Decoder
MA28151 Radiation hard Programmable Communication Interface
MA28155 Radiation Hard Programmable Peripheral Interface
相關代理商/技術參數
參數描述
MA1751E12B1+6-FSR-EM 制造商:Mechatronics Fan Group 功能描述:
MA1751E12B-FSR 功能描述:FAN AXIAL 172X150X51MM 12VDC 制造商:mechatronics fan group 系列:MA1751 零件狀態:有效 電壓 - 額定:12VDC 大小/尺寸:矩形/圓形 - 172mm 長 x 150mm 高 寬度:50.80mm 氣流:269.2 CFM(7.62m3/min) 靜壓力:0.670 英寸水柱(166.9 Pa) 軸承類型:滾珠 風扇類型:管軸式 特性:- 噪聲:61 dB(A) 功率(W):- RPM:3150 RPM 端接:2 引線 侵入防護:- 工作溫度:- 認可:UL 額定電流:2.2A 電壓范圍:- 材料 - 框架:鋁 材料 - 刀片:聚對苯二甲酸丁二酯(PBT) 重量:1.6 磅(725.7g) 標準包裝:20
MA1751E24B-FSR 功能描述:AXIAL FAN 172X150X51MM 24VDC 制造商:mechatronics fan group 系列:* 零件狀態:在售 標準包裝:1
MA1751E48B2-FSR-TTL 功能描述:AXIAL FAN 172X150X51MM 48VDC LOC 制造商:mechatronics fan group 系列:* 零件狀態:在售 標準包裝:1
MA1751H24B1+6-FSR 功能描述:AXIAL FAN 172X150X51MM 24VDC TAC 制造商:mechatronics fan group 系列:* 零件狀態:在售 標準包裝:1