X FOSCin (VCO_DIV
參數資料
型號: LMK04033BISQE/NOPB
廠商: National Semiconductor
文件頁數: 28/65頁
文件大小: 0K
描述: IC CLOCK CONDITIONER PREC 48LLP
標準包裝: 1
系列: PowerWise®
類型: 時鐘調節器
PLL:
輸入: LVCMOS
輸出: LVCMOS,LVDS,2VPECL,LVPECL
電路數: 1
比率 - 輸入:輸出: 2:6
差分 - 輸入:輸出: 是/是
頻率 - 最大: 2.16GHz
除法器/乘法器: 是/是
電源電壓: 3.15 V ~ 3.45 V
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 48-WFQFN 裸露焊盤
供應商設備封裝: 48-LLP(7x7)
包裝: 標準包裝
產品目錄頁面: 1275 (CN2011-ZH PDF)
其它名稱: LMK04033BISQEDKR
N
R
X FOSCin
(VCO_DIV CLK_DIV)
FCLK error =
N
R
FOSCin
(VCO_DIV CLK_DIV)
FCLK =
SNOSAZ8J – SEPTEMBER 2008 – REVISED SEPTEMBER 2011
CLKoutX_MUX: Clock Output Mux
The output of each CLKoutX channel pair is controlled by its' channel multiplexer (mux). The mux can select
between several signals: bypassed, divided only, divided and delayed, or delayed only.
Table 10. CLKoutX_MUX: Clock Channel Multiplexer Control Bits
CLKout_MUX [1:0]
Clock Mode
b1
b0
0
Bypassed
0
1
Divided
1
0
Delayed
1
Divided and Delayed
Registers 5, 6
These registers are reserved. These register values should not be modified from the values shown in the register
map.
Register 7
Reset bit
This bit is only in register R7. The use of this bit is optional and it should be set to '0' if not used. Setting this bit
to a '1' forces all registers to their power on reset condition and therefore automatically clears this bit.
Registers 8, 9
These registers are reserved. These register values should not be modified from the values shown in the register
map.
Register 10
RC_DLD1_Start: PLL1 Digital Lock Detect Run Control bit
This bit is used to control the state machine for the PLL2 VCO tuning algorithm. The following table describes the
function of this bit.
Table 11. RC_DLD1_Start bit States
RC_DLD1_Start
Description
1
The PLL2 VCO tuning algorithm trigger is delayed until PLL1 Digital Lock Detect is valid.
0
The PLL2 VCO tuning algorithm runs immediately after any PLL2_N counter update, despite the state of PLL1
Digital Lock Detect.
If the user is unsure of the state of the reference clock input at startup of the LMK040xx device, setting
RC_DLD1_Start = 0 will allow PLL2 to tune and lock the internal VCO to the oscillator attached to the OSCin
port. This ensures that the active clock outputs will start up at frequencies close to their desired values. The error
in clock output frequency will depend on the open loop accuracy of the oscillator driving the OSCin port. The
frequency of an active clock output is normally given by:
If the open loop frequency accuracy of the external oscillator (either a VCXO or crystal based oscillator) is "X"
ppm, then the error in the output clock frequency (FCLK error) will be:
34
Copyright 2008–2011, Texas Instruments Incorporated
相關PDF資料
PDF描述
MS27468E21A2P CONN RCPT 65POS JAM NUT W/PINS
VI-BWL-MY-F4 CONVERTER MOD DC/DC 28V 50W
VI-BWL-MY-F3 CONVERTER MOD DC/DC 28V 50W
AD5204BR100 IC DGTL POT QUAD 256POS 24-SOIC
AD5204BN50 IC DGTL POT QUAD 256POS 24-DIP
相關代理商/技術參數
參數描述
LMK04033BISQX 制造商:NSC 制造商全稱:National Semiconductor 功能描述:Low-Noise Clock Jitter Cleaner with Cascaded PLLs
LMK04033BISQX/NOPB 功能描述:時鐘合成器/抖動清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
LMK04100 制造商:TI 制造商全稱:Texas Instruments 功能描述:LMK04100 Family Clock Jitter Cleaner with Cascaded PLLs
LMK04100EVAL/NOPB 功能描述:時鐘和定時器開發工具 LMK04100 Eval Mod RoHS:否 制造商:Texas Instruments 產品:Evaluation Modules 類型:Clock Conditioners 工具用于評估:LMK04100B 頻率:122.8 MHz 工作電源電壓:3.3 V
LMK04100SQ/NOPB 功能描述:時鐘合成器/抖動清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel