參數資料
型號: LM2702
廠商: National Semiconductor Corporation
英文描述: TFT Panel Module
中文描述: 液晶面板模塊
文件頁數: 3/21頁
文件大小: 813K
代理商: LM2702
Pin Functions
Vcom+(Pin 1):
Positive input terminal of Vcom amplifier.
Vcom(Pin 2):
Negative input terminal of Vcom amplifier.
Vcom(Pin 3)
: Output terminal of Vcom amplifier.
Delay(Pin 4):
PMOS switch delay control pin. See
Operation
section for setting the delay time.
The delay time begins when the output voltage of the DC/DC
switching regulator reaches 85% of its true output voltage.
This corresponds to a FB voltage of about 1.1V. The PMOS
switch is controlled with both the delay time and the switch
control pin, SWC. If no Cdelay capacitor is used, the PMOS
switch is controlled solely with the SWC pin.
Css(Pin 5):
Softstart pin. Connect capacitor to Css pin and
AGND plane to slowly ramp inductor current on startup. See
Operation
section for setting the softstart time.
V
(Pin 6):
Compensation Network for Boost switching regu-
lator. Connect resistor/capacitor network between V
pin
and AGND for boost switching regulator AC compensation.
FB(Pin 7):
Feedback pin. Set the output voltage by selecting
values of R1 and R2 using:
Connect the ground of the feedback network to the AGND
plane, which should be tied directly to the GND pin.
GND(Pin 8):
Ground connect for LM2702. Connect all sen-
sitive circuitry, ie. feedback resistors, softstart capacitor, de-
Ordering Information
lay capacitor, and compensation network to a dedicated
AGND plane which connects directly to this pin. Connect all
power ground components to a PGND plane which should
also connect directly to this pin. Please see Layout Consid-
erations under the Operation section for more details on
layout suggestions.
SW(Pin 9):
This is the drain of the internal NMOS power
switch. Minimize the metal trace area connected to this pin to
minimize EMI.
V
IN
(Pin 10):
Input Supply Pin. Bypass this pin with a capaci-
tor as close to the device as possible. The capacitor should
connect between V
IN
and GND.
SWI(Pin 11):
PMOS switch input. Source connection of
PMOS device.
SWO(Pin 12):
PMOS switch output. Drain connection of
PMOS device.
SWC(Pin13):
PMOS switch control pin. This pin creates an
AND function with the delay time after the output of the
switching regulator has reached 85% of its nominal value. To
ensure the PMOS switch is in the correct state, apply a
voltage above 1.5V to this pin to turn on the PMOS switch
and apply a voltage below 0.7V to turn off the PMOS switch.
AV
(Pin 14):
Supply pin for the Vcom opamp and the
Gamma buffer. Bypass this pin with a capacitor as close to
the device as possible, about 100nF. The capacitor should
connect between AV
IN
and PGND.
GMA(Pin 15):
Gamma Buffer output pin.
GMA+(Pin 16):
Gamma Buffer input pin.
Order Number
LM2702MT-ADJ
LM2702MTX-ADJ
Package Type
TSSOP-16
TSSOP-16
NSC Package Drawing
MTC16
MTC16
Supplied As
73 Units, Rail
2500 Units, Tape and Reel
L
www.national.com
3
相關PDF資料
PDF描述
LM2702MT-ADJ TFT Panel Module
LM2780TP Ultra-Low Ripple Switched Capacitor Voltage Inverter
LM2780TPX Ultra-Low Ripple Switched Capacitor Voltage Inverter
LM2780 Ultra-Low Ripple Switched Capacitor Voltage Inverter
LM27966SQ White LED Driver with I2C Compatible Interface
相關代理商/技術參數
參數描述
LM2702A-ADJ WAF 制造商:Texas Instruments 功能描述:
LM2702MT-ADJ 制造商:NSC 制造商全稱:National Semiconductor 功能描述:TFT Panel Module
LM2702MT-ADJ/NOPB 功能描述:IC MODULE PANEL TFT DISP 16TSSOP RoHS:是 類別:集成電路 (IC) >> PMIC - 電源管理 - 專用 系列:- 應用說明:Ultrasound Imaging Systems Application Note 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:37 系列:- 應用:醫療用超聲波成像,聲納 電流 - 電源:- 電源電壓:2.37 V ~ 6 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:56-WFQFN 裸露焊盤 供應商設備封裝:56-TQFN-EP(8x8) 包裝:管件
LM2702MTX-ADJ 制造商:NSC 制造商全稱:National Semiconductor 功能描述:TFT Panel Module
LM2703 制造商:NSC 制造商全稱:National Semiconductor 功能描述:Micropower Step-up DC/DC Converter with 350mA Peak Current Limit