參數資料
型號: ISD-T360SB
廠商: Electronic Theatre Controls, Inc.
英文描述: VoiceDSP Digital Speech Processor with Master/Slave, Full-Duplex Speakerphone, Multiple Flash and ARAM/DRAM Support
中文描述: VoiceDSP數字語音處理器與主/從,全雙工揚聲器,多重閃光和雅藍/內存支持
文件頁數: 64/109頁
文件大小: 1567K
代理商: ISD-T360SB
2-24
2—SOFTWARE
ISD-T360SB
Voice Solutions in Silicon
2.5
COMMAND DESCRIPTION
The commands are listed in alphabetical order.
The execution time for all commands, when specified, includes the time required for the microcontrol-
ler to retrieve the return value, where appropriate.
The execution time does not include the protocol timing overhead, i.e., the execution times are mea-
sured from the moment that the command is detected as valid until the command is fully executed.
NOTE:
Each command description includes an example application of the command. The examples show the
opcode issued by the microcontroller and the response returned by the VoiceDSP processor. For com-
mands which require a return value from the processor, the start of the return value is indicated by a thick
vertical line.
CCIO
Configures the voice sample paths in various states. It should be used to change the default VoiceDSP
processor configuration. It is relevant only when two codecs are used and speakerphonr is connect-
ed.
Configure Codec I/O config_value
The config_value parameter is encoded as follows:
Bit 0
Loopback control.
0
Loopback disabled (default).
1
Loopback enabled. In the RECORD state, the input samples are echoed back, un-
changed (i.e., no volume control), to the same codec.
Bit 1
Codec input control.
0
Input is received via the line codec (default).
1
Input is received via the speakerphone codec.
Bits 2–3
Codec output control.
00
In PLAY, IDLE, SYNTHESIS and TONE_GENERATE states, output is to both codecs. In
RECORD state, output is to the non-input codec (no volume control). If the loopback
control bit is set, output in RECORD state is to both codecs as well (default).
01
Output in all states is to the line codec.
10
Output in all states is to the speakerphone codec.
11
Output in all states is to both codecs.
相關PDF資料
PDF描述
ISD1000A Single-Chip Voice Record/Playback Devices 16- and 20-Second Durations
ISD1016A Single-Chip Voice Record/Playback Devices 16- and 20-Second Durations
ISD1xxxA Single-Chip Voice Record/Playback Devices 16- and 20-Second Durations
ISD1016AG Single-Chip Voice Record/Playback Devices 16- and 20-Second Durations
ISD1016AGI Single-Chip Voice Record/Playback Devices 16- and 20-Second Durations
相關代理商/技術參數
參數描述
ISD-TH 制造商:Newport Electronics Inc 功能描述:MONITOR FOR TEMPERATURE HUMIDITY AND DE 制造商:NEWPORT ELECTRONICS 功能描述:MONITOR FOR TEMPERATURE, HUMIDITY AND DE 制造商:Newport Electronics Inc 功能描述:MONITOR FOR TEMPERATURE, HUMIDITY AND DEWPOINT; Input Voltage:100V to 240V; Kit Contents:Monitor (temp + humidity, dewpoint), LCD, 2GB SD, relay alarms, battery backup, 100-240VAC adapter
ISD-TH/N 制造商:Newport Electronics Inc 功能描述:ISD MONITOR FOR TEMPERATURE AND HUMIDITY; Input Voltage:9V to 12V
ISD-TH-5 制造商:Newport Electronics Inc 功能描述:MONITOR FOR TEMPERATURE AND HUMIDITY 制造商:Newport Electronics Inc 功能描述:MONITOR FOR TEMPERATURE AND HUMIDITY; Input Voltage:100V to 240V; Kit Contents:iSD monitor, LCD display, memory card, relay alarms, battery back-up, pwr adapter. Probe, cable
ISD-TH-5/N 制造商:Newport Electronics Inc 功能描述:ISD MONITOR FOR TEMPERATURE AND HUMIDITY; Input Voltage:9V to 12V
ISDTHP 制造商:Newport Electronics Inc 功能描述:REPLACEMENT RIGHT ANGLE PROBE; Test Probe Functions:Humidity / Temperature; For Use With:Newport Electronics iSD-TH Temperature Humidity Monitor; Kit Contents:Replacement standard right angle probe for iSD-TH product