參數資料
型號: GS1559
廠商: Gennum Corporation
英文描述: GS1559 HD-LINX-TM II Multi-Rate Deserializer with Loop-Through Cable Driver
中文描述: GS1559的HD - LINX進程,商標第二多速率解串器與環通電纜驅動器
文件頁數: 56/74頁
文件大小: 686K
代理商: GS1559
GS1559 Data Sheet
30572 - 4
July 2005
56 of 74
4.10.5.5 Line Based CRC Error Detection
The GS1559 will calculate line based CRC words for HD video signals for both the
Y and C data channels. These calculated CRC values are compared with the
received CRC values and any mismatch is flagged in the YCRC_ERR and/or
CCRC_ERR bits of the ERROR_STATUS register.
Line based CRC error flags will only be generated when the device is operating in
HD mode, (SD/HD = LOW).
If a CRC error is detected in the Y channel, the YCRC_ERR bit in the error status
register will be set HIGH. If a CRC error is detected in the C channel, the
CCRC_ERR bit in the error status register is set HIGH. Y and C CRC errors will
also be generated if CRC values are not received.
4.10.5.6 HD Line Number Error Detection
When operating in HD mode, the GS1559 will calculate line numbers based on the
timing generated by the internal flywheel. These calculated line numbers are
compared with the received line numbers for the Y channel data and any mismatch
is flagged in the LNUM_ERR bit of the ERROR_STATUS.
Line number errors will also be generated if line number values are not received.
4.10.5.7 TRS Error Detection
TRS errors flags are generated by the GS1559 when:
1. The received TRS timing does not correspond to the internal flywheel timing;
or
2. The received TRS hamming codes are incorrect.
Both 8-bit and 10-bit SAV and EAV TRS words are checked for timing and data
integrity errors. These are flagged via the SAV_ERR and/or EAV_ERR bits of the
ERROR_STATUS register.
Timing-based TRS errors will only be generated if the FW_EN/DIS pin is set HIGH.
NOTE: In HD mode, (SD/HD = LOW), only the Y channel TRS codes will be
checked for errors.
相關PDF資料
PDF描述
GS1559-CB GS1559 HD-LINX-TM II Multi-Rate Deserializer with Loop-Through Cable Driver
GS1559-CBE2 GS1559 HD-LINX-TM II Multi-Rate Deserializer with Loop-Through Cable Driver
GS2905 500mA CMOS LDO Voltage Regulator
GS2905X15 500mA CMOS LDO Voltage Regulator
GS2905X18 500mA CMOS LDO Voltage Regulator
相關代理商/技術參數
參數描述
GS1559_08 制造商:GENNUM 制造商全稱:GENNUM 功能描述:HD-LINX II Multi-Rate Deserializer with Loop-Through Cable Driver
GS1559-CB 制造商:Semtech Corporation 功能描述: 制造商:Semtech Corporation 功能描述:HD/SD/ASI Receiver
GS1559CBE2 制造商:Gennum Corporation 功能描述:DESERIALISER HD/SDI/ASI W/DRV 100BGA 制造商:Gennum Corporation 功能描述:DESERIALISER, HD/SDI/ASI, W/DRV, 100BGA
GS1559-CBE2 功能描述:RF, RFID, WIRELESS RoHS:是 類別:集成電路 (IC) >> 接口 - 串行器,解串行器 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 功能:解串器 數據速率:2.5Gbps 輸入類型:串行 輸出類型:并聯 輸入數:- 輸出數:24 電源電壓:1.8 V ~ 3.3 V 工作溫度:-40°C ~ 105°C 安裝類型:表面貼裝 封裝/外殼:64-TQFP 裸露焊盤 供應商設備封裝:64-TQFP-EP(10x10) 包裝:管件
GS1560 制造商:GENNUM 制造商全稱:GENNUM 功能描述:HD-LINX II Voltage Controlled Oscillator