參數資料
型號: EVAL-ADF4157EB1Z
廠商: Analog Devices Inc
文件頁數: 6/24頁
文件大?。?/td> 0K
描述: BOARD EVALUATION FOR ADF4157
標準包裝: 1
主要目的: 計時,頻率合成器
嵌入式:
已用 IC / 零件: ADF4157
主要屬性: 單路分?jǐn)?shù)-N PLL
次要屬性: 6GHz
已供物品:
相關產品: ADF4157BRUZ-ND - IC PLL FREQ SYNTH 6GHZ 16TSSOP
ADF4157BRUZ-RL7-ND - IC PLL FREQ SYNTH 6GHZ 16TSSOP
ADF4157BRUZ-RL-ND - IC PLL FREQ SYNTH 6GHZ 16TSSOP
ADF4157
Data Sheet
Rev. D | Page 14 of 24
R DIVIDER REGISTER (R2) MAP
With R2[2:0] set to 010, the on-chip R divider register is
programmed as shown in Figure 19.
CSR Enable
Setting this bit to 1 enables cycle slip reduction. This is a
method for improving lock times. Note that the signal at the PFD
must have a 50% duty cycle for cycle slip reduction to work. In
addition, the charge pump current setting must be set to a
section for more information.
Note also that the cycle slip reduction feature can only be
operated when the phase detector polarity setting is positive
(DB6 in Register 3). It cannot be used if the phase detector
polarity is set to negative.
Charge Pump Current Setting
Bits DB[27:24] set the charge pump current setting. This should
be set to the charge pump current that the loop filter is designed
Prescaler (P/P + 1)
The dual-modulus prescaler (P/P + 1), along with INT, FRAC,
and MOD, determine the overall division ratio from RFINx to
the PFD input.
Operating at CML levels, it takes the clock from the RF input
stage and divides it down for the counters. It is based on
a synchronous 4/5 core. When set to 4/5, the maximum RF
frequency allowed is 3 GHz. Therefore, when operating
the ADF4157 above 3 GHz, the prescaler must be set to 8/9.
The prescaler limits the INT value.
With P = 4/5, NMIN = 23.
With P = 8/9, NMIN = 75.
RDIV2
Setting this bit to 1 inserts a divide-by-2 toggle flip-flop
between the R counter and the PFD. This can be used to
provide a 50% duty cycle signal at the PFD for use with cycle
slip reduction.
Reference Doubler
Setting DB[20] to 0 feeds the REFIN signal directly to the 5-bit
RF R counter, disabling the doubler. Setting this bit to 1 multiplies
the REFIN frequency by a factor of 2 before feeding into the 5-bit
R counter. When the doubler is disabled, the REFIN falling edge
is the active edge at the PFD input to the fractional synthesizer.
When the doubler is enabled, both the rising edge and falling
edge of REFIN become active edges at the PFD input.
The maximum allowed REFIN frequency when the doubler is
enabled is 30 MHz.
5-Bit R Counter
The 5-bit R counter allows the input reference frequency
(REFIN) to be divided down to produce the reference clock to
the phase frequency detector (PFD). Division ratios from
1 to 32 are allowed.
Reserved Bits
All reserved bits should be set to 0 for normal operation.
相關PDF資料
PDF描述
AD9553/PCBZ BOARD EVAL FOR AD9553
ECE-T2WA561EA CAP ALUM 560UF 450V 20% SNAP
5503995-1 CABLE ASSEM FIBER ST-ST 1 METER
M1BXK-2436J IDC CABLE - MSR24K/MC24G/X
5504970-5 CABLE ASSEM FIBER SC-SC 10METER
相關代理商/技術參數
參數描述
EVAL-ADF4157EB1Z1 制造商:AD 制造商全稱:Analog Devices 功能描述:High Resolution 6 GHz Fractional-N Frequency Synthesizer
EVAL-ADF4158EB1Z 功能描述:BOARD EVALUATION FOR ADF4158 RoHS:是 類別:編程器,開發系統 >> 評估演示板和套件 系列:- 標準包裝:1 系列:PSoC® 主要目的:電源管理,熱管理 嵌入式:- 已用 IC / 零件:- 主要屬性:- 次要屬性:- 已供物品:板,CD,電源
EVAL-ADF4193EBZ1 功能描述:BOARD EVALUATION EB1 FOR ADF4193 RoHS:是 類別:編程器,開發系統 >> 評估演示板和套件 系列:- 標準包裝:1 系列:- 主要目的:電信,線路接口單元(LIU) 嵌入式:- 已用 IC / 零件:IDT82V2081 主要屬性:T1/J1/E1 LIU 次要屬性:- 已供物品:板,電源,線纜,CD 其它名稱:82EBV2081
EVAL-ADF4193EBZ2 功能描述:BOARD EVALUATION EB2 FOR ADF4193 RoHS:是 類別:編程器,開發系統 >> 評估演示板和套件 系列:- 標準包裝:1 系列:- 主要目的:電信,線路接口單元(LIU) 嵌入式:- 已用 IC / 零件:IDT82V2081 主要屬性:T1/J1/E1 LIU 次要屬性:- 已供物品:板,電源,線纜,CD 其它名稱:82EBV2081
EVAL-ADF4206-7EB1 制造商:Analog Devices 功能描述:EVALUATION BOARD FOR DUAL RF PLL FREQUENCY SYNTHESIZERS 制造商:Analog Devices 功能描述:DUAL RF PLL FREQ SYNTHESIZERS - Bulk