參數資料
型號: DRP3510
廠商: Electronic Theatre Controls, Inc.
英文描述: Digital Receiver Front-end
中文描述: 數字接收機前端
文件頁數: 7/30頁
文件大小: 450K
代理商: DRP3510
ADVANCE INFORMATION
DRX 3960A
Micronas
7
1.3.1. Initialization for Analog TV
The DRX 3960A is able to operate with different refer-
ence frequencies. If 20.25 MHz is used, REF_SW has
to be connected to ground; additionally, if a lower fre-
quency is used, SYN_REF (control register) has to be
set accordingly. If a higher frequency is used,
REF_SW has to be connected to V
DVDD
and
SYN_REF has to be set accordingly. In the 20.25 MHz
case, no I
2
C command is needed.
The standard which should be processed has to be set
via I
2
C bus.
Additional controlling is only needed if the default val-
ues for the remaining write registers are not applicable.
1.3.2. Multistandard Configuration for
B/G, L, I, D/K and M/N
In multistandard applications for B/G, L, I, D/K, and M/N,
the picture carrier frequency at the tuner output should
be 38.9 MHz. The sound carrier frequencies are below
in a distance corresponding to the transmission stan-
dard. Thus, all wanted channel components are within
the passband of the SAW and forwarded to the
DRX 3960A. The demodulated and filtered video sig-
nal will be available at the CVBS output and the down-
converted sound carriers will be available at the 2
nd
SIF output.
1.3.3. Multistandard Configuration for L
In the L standard, the band 1 channels (40 MHz to
65 MHz) have a different frequency configuration.
Their sound carriers are below the according picture
carrier. This sub-standard is called L
. In that case, the
picture carrier frequency at the tuner output should be
32.9 MHz. Using conventional tuners, the sound car-
rier frequencies in L
at the tuner output are above the
picture carrier. Thus, again all wanted channel compo-
nents are within the passband of the SAW.
1.3.4. FM Radio
In FM radio applications, the tuner has to down-con-
vert the wanted channel to 32.4 MHz. Therefore, the
lower slope of the SAW frequency response rejects
adjacent carriers on one side of that channel. The
DRX 3960A further down-converts the wanted channel
to 5.5 MHz. After additional filtering, the signal is fed to
the 2
nd
SIF output.
相關PDF資料
PDF描述
DRX3960 Digital Receiver Front-end
DRX3960A Digital Receiver Front-end
DRR1-23XX Digital Radio Receiver Down Converter Modules for 21.2 to 23.6 GHz(應用在 21.2 至23.6 GHz的數字收音接收下變頻模塊)
DRS251 25 Amp Automotive Rectifier 100 to 600 Volts
DRS252 25 Amp Automotive Rectifier 100 to 600 Volts
相關代理商/技術參數
參數描述
DR-P400-2P11 制造商:Drobo 功能描述:DROBO AC ADAPTER FOR STORAGE ARRAY
DRP-480 功能描述:DIN導軌式電源 RoHS:否 制造商:Mean Well 產品:Linear Supplies 商用/醫用:Commercial 輸出功率額定值:960 W 輸入電壓:180 VAC to 264 VAC, 254 VDC to 370 VDC 輸出端數量:1 輸出電壓(通道 1):48 V 輸出電流(通道 1): 輸出電壓(通道 2): 輸出電流(通道 2): 輸出電壓(通道 3): 輸出電流(通道 3): 尺寸:150 mm L x 110 mm W
DRP-480_09 制造商:MEANWELL 制造商全稱:Mean Well Enterprises Co., Ltd. 功能描述:480W Single Output Industrial DIN RAIL with PFC Function
DRP-480_11 制造商:MEANWELL 制造商全稱:Mean Well Enterprises Co., Ltd. 功能描述:480W Single Output Industrial DIN RAIL with PFC Function
DRP480-1AR 功能描述:DIN導軌式電源 24V@20A RoHS:否 制造商:Mean Well 產品:Linear Supplies 商用/醫用:Commercial 輸出功率額定值:960 W 輸入電壓:180 VAC to 264 VAC, 254 VDC to 370 VDC 輸出端數量:1 輸出電壓(通道 1):48 V 輸出電流(通道 1): 輸出電壓(通道 2): 輸出電流(通道 2): 輸出電壓(通道 3): 輸出電流(通道 3): 尺寸:150 mm L x 110 mm W