- 您現在的位置：買賣IC網 > PDF目錄376822 > DNC3X3825 (Lineage Power) Octal 10/100 Mbits/s Ethernet Transceiver Macrocell(八通道10M位/秒和100 M位/秒以太網收發器宏單元) PDF資料下載
參數資料
| 型號： | DNC3X3825 |
| 廠商： | Lineage Power |
| 英文描述： | Octal 10/100 Mbits/s Ethernet Transceiver Macrocell(八通道10M位/秒和100 M位/秒以太網收發器宏單元) |
| 中文描述： | 八路10/100 Mbits /秒以太網收發器宏單元（八通道1000萬位/秒和100海里位/秒以太網收發器宏單元） |
| 文件頁數： | 28/32頁 |
| 文件大?。?/td> | 465K |
| 代理商： | DNC3X3825 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁當前第28頁第29頁第30頁第31頁第32頁
28
DNC3X3825
Octal 10/100 Mbits/s Ethernet Transceiver Macrocell
Advance Data Sheet
March 2000
4
* The format for the bit descriptions is as follows: the first number is the register number, the second number is the bit position in the register.
R = read, LH = latched high.
Table 27. MR29—Device-Specific Register 2 (100 Mbits/s Control) Bit Descriptions
Bit
*
Type
R
Description
28.1 (LNK100UP)
Link Up 100.
This bit, when set to a 1, indicates a 100 Mbits/s transceiver is up
and operational.
Link Up 10.
This bit, when set to a 1, indicates a 10 Mbits/s transceiver is up and
operational.
28.0 (LNK10UP)
R
Bit
*
Type
R/W
Description
29.15 (LOCALRST)
Management Reset.
This is the local management reset bit. Writing a logic 1 to
this bit will cause the lower 16 registers and registers 28 and 29 to be reset to
their default values. This bit is self-clearing.
Generic Reset 1.
This register is used for manufacture test only.
Generic Reset 2.
This register is used for manufacture test only.
100 Mbits/s Transmitter Off.
When this bit is set to 0, it forces TPI low and
TPIB high. This bit defaults to 1.
LED Blinking.
This register, when 1, enables LED blinking. This is ORed with
LED_BLINK_EN. Default is 0.
Carrier Sense Select.
MCRS will be asserted on receive only when this bit is
set to a 1. If this bit is set to logic 0, MCRS will by asserted on receive or trans-
mit. This bit is ORed with the CRS_SEL pin.
Link Error Indication.
When this bit is a 1, a link error code will be reported on
MRXD[3:0] of the DNC3X3825 when MRX_ER is asserted on the MII. The spe-
cific error codes are listed in the MRXD pin description. If it is 0, it will disable this
function.
Packet Error Indication Enable.
When this bit is a 1, a packet error code,
which indicates that the scrambler is not locked, will be reported on MRXD[3:0]
of the DNC3X3825 when MRX_ER is asserted on the MII. When this bit is 0, it
will disable this function.
Pulse Stretching.
When this bit is set to 1, the CS, XS, and RS output signals
will be stretched between approximately 42 ms—84 ms. If this bit is 0, it will dis-
able this feature. Default state is 0.
Encoder/Decoder Bypass.
When this bit is set to 1, the 4B/5B encoder and
5B/4B decoder function will be disabled. This bit is ORed with the EDBT pin.
Symbol Aligner Bypass.
When this bit is set to 1, the aligner function will be
disabled.
Scrambler/Descrambler Bypass.
When this bit is set to 1, the scrambling/
descrambling functions will be disabled. This bit is ORed with the SDBT pin.
Carrier Integrity Enable.
When this bit is set to a 1, carrier integrity is enabled.
This bit is ORed with the CARIN_EN pin.
Jam Enable.
When this bit is a 1, it enables JAM associated with carrier integrity
to be ORed with MCOLMCRS.
29.14 (RST1)
29.13 (RST2)
29.12 (100_OFF)
R/W
R/W
R/W
29.11 (LED_BLINK
R/W
29.10 (CRS_SEL)
R/W
29.9 (LINK_ERR)
R/W
29.8 (PKT_ERR)
R/W
29.7 (PULSE_STR)
R/W
29.6 (EDB)
R/W
29.5 (SAB)
R/W
29.4 (SDB)
R/W
29.3 (CARIN_EN)
R/W
29.2 (JAM_COL)
R/W
Register Information
(continued)
Table 26. MR28—Device-Specific Register 1 (Status Register) Bit Descriptions
(continued)
* The format for the bit descriptions is as follows: the first number is the register number, the second number is the bit position in the register.
R = read, W = write.
相關PDF資料 |
PDF描述 |
|---|---|
| DNC5X3125 | Gigabit Ethernet Transceiver Macrocell(千兆位以太網收發器宏單元) |
| DNCM00 | 10 Mbit/s Ethernet MAC ASIC Macrocell(10 M位/秒以太網MAC ASIC宏單元) |
| DNCX01 | ASIC |
| DNCX04 | Telecommunication IC |
| DNCX06 | ASIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DNC-4796 | 功能描述:電氣外殼配件 DIN RAIL MNT CLIP 50 x 14 x 8mm RoHS:否 制造商:Hammond Manufacturing 產品:Rack Accessories 類型: 面板寬度: 面板高度: 外部寬度: 外部高度: 外部深度: 顏色:Black |
| DNC550RE3O/M | 制造商:Denon 功能描述:OWNER'S MANUAL |
| DNC550RO/M | 制造商:Denon Electronics 功能描述:OWNER'S MANUAL DNC550R |
| DNC550RS/M | 制造商:Denon Electronics 功能描述:SERVICE MANUAL |
| DNC5X3125 | 制造商:AGERE 制造商全稱:AGERE 功能描述:Gigabit Ethernet Transceiver Macrocell |
發布緊急采購，3分鐘左右您將得到回復。