參數資料
型號: AK5393-VS
廠商: Asahi Kasei Microsystems Co.,Ltd
英文描述: Enhanced Dual bit 96 kHz 24-bit ADC
中文描述: 增強雙位96 kHz的24位ADC
文件頁數: 15/18頁
文件大?。?/td> 112K
代理商: AK5393-VS
ASAHI KASEI
[AK5393]
M0038-E-04
2000/4
- 15 -
1. Grounding and Power Supply Decoupling
The AK5393 requires careful attention to power supply and grounding arrangements. Analog ground and digital ground
should be separate and connected together near to where the supplies are brought onto the printed circuit board.
Decoupling capacitors should be as near to the AK5393 as possible, with the small value ceramic capacitor being the
nearest.
2. On-chip voltage reference and VCOM
The reference voltage for A/D converter is a differential voltage between the VREFL/R output voltage and the GNDL/R
input voltage. The GNDL/R are connected to AGND and a 10μF electrolytic capacitor parallel with a 0.1μF ceramic
capacitor between the VREFL/R and the GNDL/R eliminate the effects of high frequency noise. Especially a ceramic
capacitor should be as near to the pins as possible. And all digital signals, especially clocks, should be kept away from the
VREFL/R pins in order to avoid unwanted coupling into the AK5393. No load current may be taken from the VREFL/R
pins.
VCOM is a common voltage of the analog signal. In order to eliminate the effects of high frequency noise, a 0.22μF
ceramic capacitor should be connected as near to the VCOM pin as possible. And all signals, especially clocks, should be
kept away from the VCOM pin in order to avoid unwanted coupling into the AK5393. No load current may be drawn from
the VCOM pin.
3. Analog Inputs
Analog signal is differentially input into the modulator via the AIN+ and the AIN- pins. The input voltage is the difference
between AIN+ and AIN- pins. The full-scale of each pin is nominally
±
2.45Vpp(typ). The AK5393 can accept input
voltages from AGND to VA. The ADC output data format is 2's complement. The output code is 7FFFFFH(@24bit) for
input above a positive full scale and 800000H(@24bit) for input below a negative full scale. The ideal code is 000000H
(@24bit) with no input signal. The DC offset is removed by the offset calibration.
The AK5393 samples the analog inputs at 128fs(6.144MHz @fs=48kHz,DFS="L"). The digital filter rejects noise above
the stop band except for multiples of 128fs. A simple RC filter may be used to attenuate any noise around 128fs and most
audio signals do not have significant energy at 128fs.
The AK5393 accepts +5V supply voltage. Any voltage which exceeds the upper limit of VA+0.3V and lower limit of
AGND-0.3V and any current beyond 10mA for the analog input pins(AIN+ /-) should be avoided. Excessive currents to the
input pins may damage the device. Hence input pins must be protected from signals at or beyond these limits. Use caution
specially in case of using
±
15V in other analog circuits.
相關PDF資料
PDF描述
AK5482 10 BIT 20MHZ AD CONVERTER
AK5700 16-Bit ツヒ Mono ADC with PLL & MIC-AMP
AK5700VN 16-Bit ツヒ Mono ADC with PLL & MIC-AMP
AK5701KN 16-Bit ツヒ Stereo ADC with PLL & MIC-AMP
AK5701_07 16-Bit ツヒ Stereo ADC with PLL & MIC-AMP
相關代理商/技術參數
參數描述
AK5393VSP 制造商:Asahi Kasei Microsystems Co Ltd 功能描述:24-BIT, 96KHZ ANALOG-TO-DIGITAL CONVERTER
AK5393VSP-E2 功能描述:IC ADC DGTL AUDIO 24BIT 28SOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - ADCs/DAC - 專用型 系列:- 產品培訓模塊:Data Converter Basics 標準包裝:1 系列:- 類型:電機控制 分辨率(位):12 b 采樣率(每秒):1M 數據接口:串行,并聯 電壓電源:單電源 電源電壓:2.7 V ~ 3.6 V,4.5 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:100-TQFP 供應商設備封裝:100-TQFP(14x14) 包裝:剪切帶 (CT) 其它名稱:296-18373-1
AK5394A 制造商:AKM 制造商全稱:AKM 功能描述:Super High Performance 192kHz 24-Bit ADC
AK5394A_05 制造商:AKM 制造商全稱:AKM 功能描述:Super High Performance 192kHz 24-Bit ツヒ ADC
AK5394AVS 制造商:AKM 制造商全稱:AKM 功能描述:Super High Performance 192kHz 24-Bit ツヒ ADC