
ASAHI KASEI 
[AK4702EQ] 
MS0424-E-00 
2005/09 
- 11 - 
FILTER CHARACTERISTICS (AUDIO) 
(Ta = 25
°
C; VP=10.0
~
12.6V, VD = 4.75
~
5.25V, VVD1=VVD2 = 4.75
~
5.25V; fs = 48kHz; DEM0 = “1”, DEM1 = “0”) 
Parameter 
Symbol 
Digital filter 
Passband              
±
0.05dB          (Note: 12)
                             -6.0dB 
Stopband                                      (Note: 12)
SB 
Passband Ripple 
PR 
Stopband Attenuation 
SA 
Group Delay                                (Note: 13)
GD 
Digital Filter + LPF 
Frequency Response    0 
~
 20.0kHz 
FR 
Note: 12. The passband and stopband frequencies scale with fs (system sampling rate). 
ex.) PB=0.4535×fs (@
±
0.05dB), SB=0.546×fs. 
Note: 13. The calculating delay time which occurred by digital filtering. This time is from setting the 16/18bit data of  
both channels to input register to the output of analog signal. 
ANALOG CHARACTERISTICS (VIDEO) 
 (Ta = 25
°
C; VP=12V, VD = 5V; VVD1=VVD2 = 5V; VVOL1/0= “00” unless specified.) 
Parameter 
Conditions 
Sync tip clamp 
voltage at output 
Chrominance bias 
voltage at output 
Gain 
Input=0.3Vp-p, 100kHz 
VVOL1/0= “00” 
VVOL1/0= “01” 
VVOL1/0= “10” 
VVOL1/0= “11” 
Interchannel Gain 
Mismatch 
Frequency response 
Input=0.3Vp-p, Response at 6MHz 
Input impedance 
Chrominance input (internally biased) 
Input Signal 
f=100kHz, maximum with distortion < 1.0%, 
gain=6dB. 
Load Resistance 
RFV pin (Note: 16) 
Load Capacitance 
C1    (Note: 15) 
C2    (Note: 15, Note: 16) 
Dynamic Output 
Signal 
Y/C Cross talk 
f=4.43MHz, 1Vp-p input. Among TVVOUT, 
TVRC, VCRVOUT and VCRC outputs. 
S/N 
Reference Level = 0.7Vp-p, CCIR 567 weighting. 
BW= 15kHz to 5MHz. 
Differential Gain 
0.7Vpp 5steps modulated staircase. 
chrominance &burst are 280mVpp, 4.43MHz. 
Differential Phase 
0.7Vpp 5steps modulated staircase. 
chrominance &burst are 280mVpp, 4.43MHz. 
min 
typ 
max 
Units 
PB 
0 
- 
24.0 
19.1 
21.77 
- 
±
 0.06 
- 
kHz 
kHz 
kHz 
dB 
dB 
1/fs 
26.23 
54 
- 
- 
±
 0.5 
- 
dB 
min 
typ 
0.7 
max 
Units 
V 
2.2 
6 
6 
7.2 
8.2 
9.1 
- 
V 
5.5 
5.5 
6.7 
7.7 
8.6 
-0.3 
6.5 
6.5 
7.7 
8.7 
9.6 
0.3 
dB 
dB 
dB 
dB 
dB 
dB 
RGB Gain 
Input=0.3Vp-p, 100kHz 
Input=0.3Vp-p, 100kHz (Note: 14) 
-1 
40 
- 
-0.5 
60 
- 
dB 
kohm 
Vpp 
- 
1.5 
Except RFV pin (Note: 15) 
150 
20k 
- 
- 
- 
- 
ohm 
ohm 
pF 
pF 
Vpp 
400 
15 
3 
f=100kHz, maximum with distortion < 1.0% 
- 
- 
- 
-50 
- 
dB 
- 
74 
- 
dB 
- 
+0.4 
- 
% 
- 
+0.8 
- 
Degree