參數資料
型號: AK4647
廠商: Asahi Kasei Microsystems Co.,Ltd
元件分類: Codec
英文描述: Stereo CODEC with MIC/HP-AMP
中文描述: 立體聲編解碼器麥克風/惠普腺苷
文件頁數: 68/72頁
文件大小: 565K
代理商: AK4647
ASAHI KASEI
[AK4647]
MS0566-E-00
2006/11
- 68 -
Stereo Line Output
FS3-0 bits
(Addr:05H, D5&D2-0)
DVL/R7-0 bits
(Addr:0AH&0DH, D7-0)
PMDAC bit
(Addr:00H, D2)
PMLO bit
(Addr:00H, D3)
1,111
0,000
18H
28H
LOUT pin
ROUT pin
(1)
(4)
(5)
(2)
DACL bit
(Addr:02H, D4)
(10)
Normal Output
(7)
LOPS bit
(Addr:03H, D6)
(6)
>300 ms
(8)
(9)
>300 ms
(11)
IVL/R7-0 bits
(Addr:09H&0CH, D7-0)
E1H
91H
(3)
PMBP bit
(Addr:00H, D5)
Example:
PLL, Master Mode
Audio I/F Format :MSB justified (ADC & DAC)
Sampling Frequency: 44.1kHz
Digital Volume:
8dB
LOVL=MINL bits = “0”
(1) Addr:05H, Data:27H
(2) Addr:02H, Data:10H
(4) Addr:0AH&0DH, Data:28H
(5) Addr:03H, Data:40H
(6) Addr:00H, Data:6CH
(7) Addr:03H, Data:00H
Playback
(8) Addr:03H, Data:40H
(9) Addr:00H, Data:40H
(10) Addr:02H, Data:00H
(11) Addr:03H, Data:00H
(3) Addr:09H&0CH, Data:91H
Figure 53. Stereo Lineout Sequence
<Example>
At first, clocks should be supplied according to “Clock Set Up” sequence.
(1) Set up the sampling frequency (FS3-0 bits). When the AK4647 is PLL mode, DAC and Stereo Line-Amp
should be powered-up in consideration of PLL lock time after the sampling frequency is changed.
(2) Set up the path of “DAC
Stereo Line Amp”: DACL bit = “0”
“1”
(3) Set up the input digital volume (Addr: 09H and 0CH)
When PMADL = PMADR bits = “0”, IVL7-0 and IVR7-0 bits should be set to “91H”(0dB).
(4) Set up the output digital volume (Addr: 0AH and 0DH)
When DVOLC bit is “1” (default), DVL7-0 bits set the volume of both channels. After DAC is powered-up,
the digital volume changes from default value (0dB) to the register setting value by the soft transition.
(5) Enter power-save mode of Stereo Line Amp: LOPS bit = “0”
“1”
(6) Power-up DAC, MIN-Amp and Stereo Line-Amp: PMDAC = PMMIN = PMLO bits = “0”
“1”
The DAC enters an initialization cycle that starts when the PMDAC bit is changed from “0” to “1” at PMADL
and PMADR bits are “0”. The initialization cycle time is 1059/fs=24ms@fs=44.1kHz. During the
initialization cycle, the DAC input digital data of both channels are internally forced to a 2's compliment, “0”.
The DAC output reflects the digital input data after the initialization cycle is complete. When PMADL or
PMADR bit is “1”, the DAC does not require an initialization cycle. When ALC bit is “1”, ALC is disable
(ALC gain is set by IVL/R7-0 bits) during an intialization cycle (1059/fs=24ms@fs=44.1kHz). After the
initialization cycle, ALC operation starts from the gain set by IVL/R7-0 bits.
LOUT and ROUT pins rise up to VCOM voltage after PMLO bit is changed to “1”. Rise time is 300ms(max)
at C=1
μ
F and AVDD=3.3V.
(7) Exit power-save mode of Stereo Line-Amp: LOPS bit = “1”
“0”
LOPS bit should be set to “0” after LOUT and ROUT pins rise up. Stereo Line-Amp goes to normal operation
by setting LOPS bit to “0”.
(8) Enter power-save mode of Stereo Line-Amp: LOPS bit: “0”
“1”
(9) Power-down DAC, MIN-Amp and Stereo Line-Amp: PMDAC = PMMIN = PMLO bits = “1”
“0”
LOUT and ROUT pins fall down to AVSS. Fall time is 300ms(max) at C=1
μ
F and AVDD=3.3V.
(10) Disable the path of “DAC
Stereo Line-Amp”: DACL bit = “1”
“0”
(11) Exit power-save mode of Stereo Line-Amp: LOPS bit = “1”
“0”
LOPS bit should be set to “0” after LOUT and ROUT pins fall down.
相關PDF資料
PDF描述
AK4647VN Stereo CODEC with MIC/HP-AMP
AK4648 Stereo CODEC with MIC/HP/SPK-AMP
AK4648EC Stereo CODEC with MIC/HP/SPK-AMP
AK4650 16Bit ツヒ CODEC with MIC/HP/SPK-AMP & TSC
AK4650VG 16Bit ツヒ CODEC with MIC/HP/SPK-AMP & TSC
相關代理商/技術參數
參數描述
AK4647VN 制造商:AKM 制造商全稱:AKM 功能描述:Stereo CODEC with MIC/HP-AMP
AK4647VQ 制造商:AKM 制造商全稱:AKM 功能描述:Stereo CODEC with MIC/HP-AMP
AK4648 制造商:AKM 制造商全稱:AKM 功能描述:stereo CODEC with MIC/HP/SPK amplifier
AK4648EC 制造商:AKM 制造商全稱:AKM 功能描述:Stereo CODEC with MIC/HP/SPK-AMP
AK4649 制造商:AKM 制造商全稱:AKM 功能描述:24bit Stereo CODEC with MIC/SPK-AMP