參數資料
型號: AK4569
廠商: Asahi Kasei Microsystems Co.,Ltd
元件分類: Codec
英文描述: 20-Bit Stereo CODEC with IPGA & HP-AMP
中文描述: 20位立體聲編解碼器與單親遺傳算法
文件頁數: 39/45頁
文件大?。?/td> 474K
代理商: AK4569
ASAHI KASEI
[AK4569]
MS0292-E-01
2005/07
- 39 -
1. Grounding and Power Supply Decoupling
The AK4569 requires careful attention to power supply and grounding arrangements. AVDD is usually supplied from the
analog power supply in the system and DVDD is supplied from AVDD via a 10
resistor. Alternatively if AVDD,
DVDD and HVDD are supplied separately, the power up sequence is not critical. AVSS, DVSS and HVSS must be
connected to the analog ground plane. System analog ground and digital ground should be connected together near to
where the supplies are brought onto the printed circuit board. Decoupling capacitors should be as close to the AK4569 as
possible, with the small value ceramic capacitors being the nearest.
2. Internal Voltage Reference
Internal voltage reference is output on the VREF pin (typ. 2.1V). An electrolytic capacitor 4.7
μ
F in parallel with a 0.1
μ
F
ceramic capacitor is attached between VREF and AVSS to eliminate the effects of high frequency noise. VCOM is
1.25V(typ) and is a signal ground of this chip. A 2.2
μ
F electrolytic capacitor in parallel with a 0.1
μ
F ceramic capacitor
should be connected between VCOM and AVSS to eliminate the effects of high frequency noise. A ceramic capacitor
should be connected to VCOM pin and located as close as possible to the AK4569. No load current may be drawn from
VREF and VCOM pins. All signals, especially clocks, should be kept away from the VCOM and VREF pins in order to
avoid unwanted coupling into the AK4569.
3. Analog Inputs
The analog inputs are single-ended and the input resistance 50k
(typ) for AINL1/AINR1 pins and 12.5k
(typ) for
AINL2/AINR2 pins. The input signal range is 1.5Vpp centered on VCOM voltage. Usually, the input signal cuts DC with
a capacitor. The cut-off frequency is fc=(1/2
π
RC). The AK4569 can accept input voltages from AVSS to AVDD. The
ADC output data format is 2’s complement. The ADC’s DC offset is removed by the internal HPF
(fc=3.4Hz@fs=44.1kHz).
4. Analog Outputs
The analog outputs are single-ended outputs and 1.5Vpp(typ) centered on the VCOM voltage. The input data format is 2’s
compliment. The output voltage is a positive full scale for 7FFFFH(@20bit) and negative full scale for 80000H(@20bit).
The ideal output is VCOM voltage for 00000H(@20bit). If the noise generated by the delta-sigma modulator beyond the
audio band causes problems, attenuation by an external filter is required.
DC offsets on the analog outputs is eliminated by AC coupling since the analog outputs have a DC offset equal to VCOM
plus a few mV.
相關PDF資料
PDF描述
AK4569VN 20-Bit Stereo CODEC with IPGA & HP-AMP
AK4584VQ 24Bit 96kHz Audio CODEC with DIT/DIR
AK4586 MULTI CHANNEL AUDIO CODEC WITH DIR
AK4586VQ Circular Connector; MIL SPEC:MIL-C-5015 A/B/C; Body Material:Aluminum Alloy; Series:97-3100A; No. of Contacts:4; Connector Shell Size:18; Connecting Termination:Solder; Circular Shell Style:Wall Mount Receptacle RoHS Compliant: No
AK4588 2/8 CHANNEL AUDIO CODEC WITH DIR
相關代理商/技術參數
參數描述
AK4569VN 制造商:AKM 制造商全稱:AKM 功能描述:20-Bit Stereo CODEC with IPGA & HP-AMP
AK4571 制造商:AKM 制造商全稱:AKM 功能描述:USB I/F Audio CODEC
AK4571_05 制造商:AKM 制造商全稱:AKM 功能描述:USB Interface Audio CODEC
AK4571VQ 制造商:AKM 制造商全稱:AKM 功能描述:USB Interface Audio CODEC
AK4571VQP 功能描述:IC AUDIO CODEC W/USB 16B 48LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 編解碼器 系列:- 標準包裝:2,500 系列:- 類型:PCM 數據接口:PCM 音頻接口 分辨率(位):15 b ADC / DAC 數量:1 / 1 三角積分調變:是 S/N 比,標準 ADC / DAC (db):- 動態范圍,標準 ADC / DAC (db):- 電壓 - 電源,模擬:2.7 V ~ 3.3 V 電壓 - 電源,數字:2.7 V ~ 3.3 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:80-VFBGA 供應商設備封裝:80-BGA MICROSTAR JUNIOR(5x5) 包裝:帶卷 (TR) 其它名稱:296-21257-2