參數資料
型號： ADV7341EBZ
廠商： Analog Devices, Inc.
英文描述： Multiformat Video Encoder, Six 12-Bit Noise Shaped Video㈢ DACS
中文描述： 多格式視頻編碼器，6個12位噪聲整形視頻㈢交叉連接系統
文件頁數： 56/88頁
文件大?。?/td> 1066K
代理商： ADV7341EBZ
ADV7340/ADV7341
SD HUE ADJUST CONTROL
Subaddress 0xA0
When enabled, the SD hue adjust control register
(Subaddress 0xA0) is used to adjust the hue on the SD
composite and chroma outputs. This feature can be
enabled using Subaddress 0x87, Bit 2.
Subaddress 0xA0 contains the bits required to vary the hue of
the video data, that is, the variance in phase of the subcarrier
during active video with respect to the phase of the subcarrier
during the color burst. The ADV7340/ADV7341 provide a
range of ±22.5° in increments of 0.17578125°. For normal
operation (zero adjustment), this register is set to 0x80. Values
0xFF and 0x00 represent the upper and lower limits,
respectively, of the attainable adjustment in NTSC mode. Values
0xFF and 0x01 represent the upper and lower limits,
respectively, of the attainable adjustment in PAL mode.
The hue adjust value is calculated using the following equation:
Hue Adjust
(°) = 0.17578125° (
HCR
d
128)
where
HCR
d
is the hue adjust control register (decimal)
For example, to adjust the hue by +4°, write 0x97 to the hue
adjust control register.
Rev. 0 | Page 56 of 88
97
x
0
151
128
17578125
.
4
=
≈
+
d
where the sum is rounded to the nearest integer.
To adjust the hue by 4°, write 0x69 to the hue adjust control
register.
9
6
x
0
105
128
17578125
.
4
=
≈
+
d
where the sum is rounded to the nearest integer.
SD BRIGHTNESS DETECT
Subaddress 0xBA
The ADV7340/ADV7341 allow monitoring of the brightness
level of the incoming video data. The SD brightness detect
register (Subaddress 0xBA) is a read-only register.
SD BRIGHTNESS CONTROL
Subaddress 0xA1, Bits[6:0]
When this feature is enabled, the SD brightness/WSS control
register (Subaddress 0xA1) is used to control brightness by
adding a programmable setup level onto the scaled Y data. This
feature can be enabled using Subaddress 0x87, Bit 3.
For NTSC with pedestal, the setup can vary from 0 IRE to 22.5 IRE.
For NTSC without pedestal and for PAL, the setup can vary
from 7.5 IRE to +15 IRE.
The SD brightness control register is an 8-bit register. The seven
LSBs of this 8-bit register are used to control the brightness
level, which can be a positive or negative value.
For example, to add +20 IRE brightness level to an NTSC signal
with pedestal, write 0x28 to Subaddress 0xA1.
0 ×
(SD Brightness Value)
=
0 × (
IRE Value
× 2.015631) =
0 × (20 × 2.015631) = 0 × (40.31262) ≈ 0x28
To add –7 IRE brightness level to a PAL signal, write 0x72 to
Subaddress 0xA1.
0 × (
SD Brightness Value
) =
0 × (
IRE Value
× 2.075631) =
0 × (7 × 2.015631) = 0x(14.109417) ≈ 0001110b
0001110b
into twos complement
= 1110010b = 0x72
Table 45. Sample Brightness Control Values
1
Setup Level
(NTSC) with
Pedestal
Pedestal
22.5 IRE
15 IRE
15 IRE
7.5 IRE
7.5 IRE
0 IRE
0 IRE
7.5 IRE
Setup Level
(NTSC) Without
Setup
Level
(PAL)
15 IRE
7.5 IRE
0 IRE
7.5 IRE
Brightness
Control Value
0x1E
0x0F
0x00
0x71
1
Values in the range of 0x3F to 0x44 could result in an invalid output signal.
SD INPUT STANDARD AUTO DETECTION
Subaddress 0x87, Bit 5
The ADV7340/ADV7341 include an SD input standard auto-
detect feature. This SD feature can be enabled by setting
Subaddress 0x87, Bit 5 to 1.
When enabled, the ADV7340/ADV7341 can automatically
identify an NTSC or PAL B/D/G/H/I input stream. The
ADV7340/ADV7341 automatically update the subcarrier
frequency registers with the appropriate value for the identified
standard. The ADV7340/ADV7341 are also configured to
correctly encode the identified standard.
The SD standard bits (Subaddress 0x80, Bits[1:0]) and the
subcarrier frequency registers are not updated to reflect the
identified standard. All registers retain their default or user-
defined values.
NTSC WITHOUT PEDESTAL
NO SETUP
VALUE ADDED
POSITIVE SETUP
VALUE ADDED
100 IRE
0 IRE
NEGATIVE SETUP
VALUE ADDED
–7.5 IRE
+7.5 IRE
0
Figure 68. Examples of Brightness Control Values
相關PDF資料
PDF描述
ADV7343BSTZ Multiformat Video Encoder Six, 11-Bit, 297 MHz DACs
ADV7342 Multiformat Video Encoder Six, 11-Bit, 297 MHz DACs
ADV7342BSTZ Multiformat Video Encoder Six, 11-Bit, 297 MHz DACs
ADV7343 Multiformat Video Encoder Six, 11-Bit, 297 MHz DACs
ADV7344 Multiformat Video Encoder Six 14-Bit Noise Shaped Video DACs
相關代理商/技術參數
參數描述
ADV7342 制造商:AD 制造商全稱:Analog Devices 功能描述:Multiformat Video Encoder Six, 11-Bit, 297 MHz DACs
ADV7342BSTZ 制造商:AD 制造商全稱:Analog Devices 功能描述:Multiformat Video Encoder Six, 11-Bit, 297 MHz DACs
ADV7343 制造商:AD 制造商全稱:Analog Devices 功能描述:Multiformat Video Encoder Six, 11-Bit, 297 MHz DACs
ADV7343BSTZ 功能描述:IC ENCODER VIDEO W/DAC 64-LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 編碼器，解碼器，轉換器 系列:- 產品變化通告:Development Systems Discontinuation 26/Apr/2011 標準包裝:1 系列:- 類型:編碼器 應用:DVB-S.2 系統 電壓 - 電源，模擬:- 電壓 - 電源，數字:- 安裝類型:- 封裝/外殼:模塊 供應商設備封裝:模塊 包裝:散裝 其它名稱:Q4645799
ADV7343WBSTZ 功能描述:IC ENCODER VID 12BIT DAC 64LQFP 制造商:analog devices inc. 系列:- 包裝:托盤 零件狀態:在售 類型:視頻編碼器 應用:DVD，Blu-Ray 電壓 - 電源，模擬:2.6 V ~ 3.46 V 電壓 - 電源，數字:1.71 V ~ 1.89 V 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商器件封裝:64-LQFP（10x10） 標準包裝:1
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*