- 您現在的位置：買賣IC網 > PDF目錄11656 > AD9814JRRL (Analog Devices Inc)IC CCD SIGNAL PROC 14BIT 28-SOIC PDF資料下載
參數資料
| 型號： | AD9814JRRL |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 4/15頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC CCD SIGNAL PROC 14BIT 28-SOIC |
| 標準包裝： | 1,000 |
| 類型： | CCD 信號處理器，14 位 |
| 輸入類型： | 邏輯 |
| 輸出類型： | 邏輯 |
| 接口： | 3 線串口 |
| 電流 - 電源： | 80mA |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 28-SOIC（0.295"，7.50mm 寬） |
| 供應商設備封裝： | 28-SOIC W |
| 包裝： | 帶卷 (TR) |
REV. 0
AD9814
–12–
CIRCUIT OPERATION
Analog Inputs—CDS Mode
Figure 8 shows the analog input configuration for the CDS
mode of operation. Figure 9 shows the internal timing for the
sampling switches. The CCD reference level is sampled when
CDSCLK1 transitions from high to low, opening S1. The CCD
data level is sampled when CDSCLK2 transitions from high to
low, opening S2. S3 is then closed, generating a differential
output voltage representing the difference between the two sampled
levels.
The input clamp is controlled by CDSCLK1. When CDSCLK1
is high, S4 closes and the internal bias voltage is connected to
the analog input. The bias voltage charges the external 0.1
F
input capacitor, level-shifting the CCD signal into the AD9814’s
input common-mode range. The time constant of the input
clamp is determined by the internal 5 k
resistance and the
external 0.1
F input capacitance.
AD9814
S1
S2
4pF
S3
4pF
CML
AVDD
4V
S4
5k
1.7k
VINR
OFFSET
CIN
0.1 F
CCD SIGNAL
0.1 F
1 F
+
3V
2.2k
6.9k
INPUT CLAMP LEVEL
IS SELECTED IN THE
CONFIGURATION
REGISTER
Figure 8. CDS-Mode Input Configuration (All Three Chan-
nels Are Identical)
CDSCLK1
CDSCLK2
Q3
(INTERNAL)
S1, S4 CLOSED
S2 CLOSED
S3 CLOSED
S3 OPEN
S2 OPEN
S1, S4 OPEN
Figure 9. CDS-Mode Internal Switch Timing
External Input Coupling Capacitors
The recommended value for the input coupling capacitors is
0.1
F. While it is possible to use a smaller capacitor, this larger
value is chosen for several reasons:
1. Signal Attenuation. The input coupling capacitor creates a
capacitive divider with a CMOS integrated circuit’s input
capacitance, attenuating the CCD signal level. CIN should be
large relative to the IC’s 10 pF input capacitance in order to
minimize this effect.
2. Linearity. Some of the input capacitance of a CMOS IC is
junction capacitance, which varies nonlinearly with applied
voltage. If the input coupling capacitor is too small, then the
attenuation of the CCD signal will vary nonlinearly with signal
level. This will degrade the system linearity performance.
3. Sampling Errors. The internal 4 pF sample capacitors have
a “memory” of the previously sampled pixel. There is a
charge redistribution error between CIN and the internal
sample capacitors for larger pixel-to-pixel voltage swings. As
the value of CIN is reduced, the resulting error in the sampled
voltage will increase. With a CIN value of 0.1 F, the charge
redistribution error will be less than 1 LSB for a full-scale
pixel-to-pixel voltage swing.
Analog Inputs—SHA Mode
Figure 10 shows the analog input configuration for the SHA
mode of operation. Figure 11 shows the internal timing for the
sampling switches. The input signal is sampled when CDSCLK2
transitions from high to low, opening S1. The voltage on the
OFFSET pin is also sampled on the falling edge of CDSCLK2,
when S2 opens. S3 is then closed, generating a differential out-
put voltage representing the difference between the sampled
input voltage and the OFFSET voltage. The input clamp is
disabled during SHA mode operation.
AD9814
S1
4pF
S3
CML
VINR
INPUT SIGNAL
S2
4pF
CML
OFFSET
RED
VING
GREEN
VINB
BLUE
OPTIONAL DC OFFSET
(OR CONNECT TO GND)
Figure 10. SHA-Mode Input Configuration (All Three
Channels Are Identical)
CDSCLK2
Q3
(INTERNAL)
S1, S2 CLOSED
S3 CLOSED
S3 OPEN
S1, S2 OPEN
Figure 11. SHA-Mode Internal Switch Timing
相關PDF資料 |
PDF描述 |
|---|---|
| D38999/26JF32SC | CONN PLUG 32POS STRAIGHT W/SCKT |
| CS3100A-24-58S | CONN RCPT 13POS WALL MNT W/SCKT |
| MCR908JK3ECPE | IC MCU FLASH 8BIT RC OSC 20-DIP |
| MS3110P22-21S | CONN RCPT 21POS WALL MNT W/SCKT |
| MC9S08EL16CTJ | MCU 16KB FLASH SLIC 20TSSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD9814KR | 制造商:Analog Devices 功能描述:AFE Video 1ADC 14-Bit 5V 28-Pin SOIC W 制造商:Analog Devices 功能描述:14 BIT 6 MSPS SCANNER ANALOG FRONT END - Rail/Tube 制造商:Rochester Electronics LLC 功能描述:14 BIT 6 MSPS SCANNER ANALOG FRONT END - Bulk |
| AD9814KRRL | 制造商:Analog Devices 功能描述:AFE Video 1ADC 14-Bit 5V 28-Pin SOIC W 制造商:Analog Devices 功能描述:14 BIT 6 MSPS SCANNER ANALOG FRONT END - Tape and Reel 制造商:Rochester Electronics LLC 功能描述:14 BIT 6 MSPS SCANNER ANALOG FRONT END - Bulk |
| AD9814S | 制造商:AD 制造商全稱:Analog Devices 功能描述:14-Bit CCD/CIS Signal Processor |
| AD9816 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Complete 12-Bit 6 MSPS CCD/CIS Signal Processor |
| AD9816-EB | 制造商:Analog Devices 功能描述:12-BIT 4MSPS CCD/CIS SIGNAL PROCESSOR - Bulk |
發布緊急采購，3分鐘左右您將得到回復。