參數資料
型號: AD7734BRU
廠商: ANALOG DEVICES INC
元件分類: ADC
英文描述: 4-Channel, +-10 V Input Range, High Throughput, 24-Bit sigma ∆ ADC
中文描述: 4-CH 24-BIT DELTA-SIGMA ADC, SERIAL ACCESS, PDSO28
封裝: MO-153AE, TSSOP-28
文件頁數: 21/32頁
文件大?。?/td> 1542K
代理商: AD7734BRU
AD7734
MD2 MD1 MD0 Operating Mode
0
0
0
Idle Mode
The default mode after power-on or reset.
The AD7734 automatically returns to this mode after any calibration or after a single conversion.
Continuous Conversion Mode
The AD7734 performs a conversion on the specified channel. After the conversion is complete, the relevant channel
data register and channel status register are updated, the relevant RDY bit in the ADC status register is set, and the
AD7734 continues converting on the next enabled channel. The part will cycle through all enabled channels until it is
put into another mode or reset. The cycle period will be the sum of all enabled channels’ conversion times, set by the
corresponding channel conversion time registers.
Single Conversion Mode
The AD7734 performs a conversion on the specified channel. After the conversion is complete, the relevant channel
data register and channel status register are updated, the relevant RDY bit in the ADC status register is set, the RDY pin
goes low, the MD2–MD0 bits are reset, and the AD7734 returns to idle mode. Requesting a single conversion ignores
the channel setup register enable bits; a conversion will be performed even if that channel is disabled.
Power-Down (Standby) Mode
The ADC and the analog front end (internal buffer) go into the power-down mode.
The AD7734 digital interface can still be accessed. The CLKDIS bit works separately, and the MCLKOUT mode is not
affected by the power-down (standby) mode.
ADC Zero-Scale Self-Calibration Mode
A zero-scale self-calibration is performed on internally shorted ADC inputs.
After the calibration is complete, the contents of the ADC zero-scale calibration register are updated, all RDY bits in the
ADC status register are set, the RDY pin goes low, the MD2–MD0 bits are reset, and the AD7734 returns to idle mode.
For Future Use.
Channel Zero-Scale System Calibration Mode
A zero-scale system calibration is performed on the selected channel. An external system zero-scale voltage should be
provided at the AD7734 analog input and this voltage should remain stable for the duration of the calibration. After the
calibration is complete, the contents of the corresponding channel zero-scale calibration register are updated, all RDY
bits in the ADC status register are set, the RDY pin goes low, the MD2–MD0 bits are reset, and the AD7734 returns to
idle mode.
Channel Full-Scale System Calibration Mode
A full-scale system calibration is performed on the selected channel. An external system full-scale voltage should be
provided at the AD7734 analog input and this voltage should remain stable for the duration of the calibration. After the
calibration is complete, the contents of the corresponding channel full-scale calibration register are updated, all RDY
bits in the ADC status register are set, the RDY pin goes low, the MD2–MD0 bits are reset, and the AD7734 returns to
idle mode.
0
0
1
0
1
0
0
1
1
1
0
0
1
1
0
1
1
0
1
1
1
Rev. 0 | Page 21 of 32
相關PDF資料
PDF描述
AD7738 8-Channel, High Throughput,
AD7738BRU 8-Channel, High Throughput,
AD7741 Low Cost, Single & Multi-Channel,Voltage-to-Frequency Converters(低成本,單通道,電壓-頻率轉換器)
AD7742 Low Cost, Single & Multi-Channel,Voltage-to-Frequency Converters(低成本,多通道,電壓-頻率轉換器)
AD7746ARUZ-REEL 24-Bit Capacitance-to-Digital Converter with Temperature Sensor
相關代理商/技術參數
參數描述
AD7734BRU-REEL 制造商:Analog Devices 功能描述:ADC Single Delta-Sigma 3.05Msps 24-bit Serial 28-Pin TSSOP T/R 制造商:Analog Devices 功能描述:ADC SGL DELTA-SIGMA 15.437KSPS 24BIT SERL 28TSSOP - Tape and Reel
AD7734BRU-REEL7 制造商:Analog Devices 功能描述:ADC Single Delta-Sigma 3.05Msps 24-bit Serial 28-Pin TSSOP T/R 制造商:Analog Devices 功能描述:ADC SGL DELTA-SIGMA 15.437KSPS 24BIT SERL 28TSSOP - Tape and Reel
AD7734BRUZ 功能描述:IC ADC 24BIT 4-CH 28-TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 其它有關文件:TSA1204 View All Specifications 標準包裝:1 系列:- 位數:12 采樣率(每秒):20M 數據接口:并聯 轉換器數目:2 功率耗散(最大):155mW 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP(7x7) 包裝:Digi-Reel® 輸入數目和類型:4 個單端,單極;2 個差分,單極 產品目錄頁面:1156 (CN2011-ZH PDF) 其它名稱:497-5435-6
AD7734BRUZ 制造商:Analog Devices 功能描述:IC 24BIT ADC SMD 7734 TSSOP28
AD7734BRUZ-REEL 功能描述:IC ADC 24BIT 4CH SIG-DEL 28TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率(每秒):300k 數據接口:并聯 轉換器數目:1 功率耗散(最大):75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC(0.295",7.50mm 寬) 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端,單極;1 個單端,雙極