參數資料
型號: AD5174BRMZ-10
廠商: Analog Devices Inc
文件頁數: 6/20頁
文件大?。?/td> 0K
描述: IC DGTL POT 1024POS 10K 10MSOP
產品變化通告: AD5174 Pin Requirement 14/Dec/2010
標準包裝: 50
接片: 1024
電阻(歐姆): 10k
電路數: 1
溫度系數: 標準值 35 ppm/°C
存儲器類型: 非易失
接口: 4 線串行
電源電壓: 2.7 V ~ 5.5 V,±2.5 V ~ 2.75 V
工作溫度: -40°C ~ 125°C
安裝類型: 表面貼裝
封裝/外殼: 10-TFSOP,10-MSOP(0.118",3.00mm 寬)
供應商設備封裝: 10-MSOP
包裝: 管件
AD5174
Rev. B | Page 14 of 20
SHUTDOWN MODE
The AD5174 can be shut down by executing the software
shutdown command, Command 9 (see Table 6), and setting
the LSB to 1. This feature places the RDAC in a zero-power-
consumption state where Terminal A is open circuited and
the wiper terminal, W, remains connected. It is possible to
execute any command from Table 6 while the AD5174 is in
shutdown mode. The parts can be taken out of shutdown
mode by executing Command 9 and setting the LSB to 0
or by a software reset, Command 4 (see Table 6).
RESET
The AD5174 can be reset through software by executing Com-
mand 4 (see Table 6). The reset command loads the RDAC
register with the contents of the most recently programmed 50-TP
memory location. The RDAC register loads with midscale if no
50-TP memory location has been previously programmed.
Table 7. Write and Read to RDAC and 50-TP Memory
DIN
Action
0x1C03
0xXXXX
Enable update of the wiper position and the 50-TP memory contents through the digital interface.
0x0500
0x1C03
Write 0x100 to the RDAC register; wiper moves to full-scale position.
0x0800
0x0500
Prepares data read from RDAC register.
0x0C00
0x100
Stores RDAC register content into the 50-TP memory. A 16-bit word appears out of SDO, where the last 10 bits contain
the contents of the RDAC register (0x100).
0x1800
0x0C00
Prepares data read of the last programmed 50-TP memory monitor location.
0x0000
0xXX19
NOP Instruction 0 sends a 16-bit word out of SDO, where the six LSBs (that is, last six bits) contain the binary address of
the last programmed 50-TP memory location, for example, 0x19 (see Table 10).
0x1419
0x0000
Prepares data read from Memory Location 0x19.
0x2000
0x0100
Prepares data read from the control register. Sends a 16-bit word out of SDO, where the last 10 bits contain the
contents of Memory Location 0x19.
0x0000
0xXXXX
NOP Instruction 0 sends a 16-bit word out of SDO, where the last four bits contain the contents of the control register.
If Bit C2 = 1, the fuse program command was successful.
1 X is don’t care.
Table 8. Control Register Bit Map
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
0
C2
0
C1
C0
Table 9. Control Register Bit Description
Bit Name
Description
C0
50-TP program enable
0 = 50-TP program disabled (default)
1 = enable device for 50-TP program
C1
RDAC register write protect
0 = wiper position frozen to value in 50-TP memory (default)1
1 = allow update of wiper position through digital interface
C2
50-TP memory program success bit
0 = fuse program command was unsuccessful (default)
1 = fuse program command was successful
1 Wiper position frozen to the last value programmed in the 50-TP memory. The wiper is frozen to midscale if the 50-TP memory has not been previously programmed.
相關PDF資料
PDF描述
PI5C3251QE IC 8:1 MUX/DEMUX BUS SW 16-QSOP
AD5204BRUZ100 IC DGTL POT 256POS 100K 24TSSOP
MS27473E16A42P CONN PLUG 42POS STRAIGHT W/PINS
AD5204BRUZ10 IC POT DGTL QUAD 256POS 24TSSOP
MS3452W16-9PX CONN RCPT 4POS BOX MNT W/PINS
相關代理商/技術參數
參數描述
AD5174BRMZ-10-RL7 功能描述:IC DGTL POT 1024POS 10K 10MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 標準包裝:3,000 系列:DPP 接片:32 電阻(歐姆):10k 電路數:1 溫度系數:標準值 300 ppm/°C 存儲器類型:非易失 接口:3 線串行(芯片選擇,遞增,增/減) 電源電壓:2.5 V ~ 6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-WFDFN 裸露焊盤 供應商設備封裝:8-TDFN(2x3) 包裝:帶卷 (TR)
AD5175 制造商:AD 制造商全稱:Analog Devices 功能描述:Single-Channel, 1024-Position, Digital Rheostat with I2C Interface and 50-TP Memory
AD5175BCPZ-10-R2 制造商:AD 制造商全稱:Analog Devices 功能描述:Single-Channel, 1024-Position, Digital Rheostat with I2C Interface and 50-TP Memory
AD5175BCPZ-10-RL7 功能描述:IC RHEOSTAT 5V 50-TP 1024 10MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 標準包裝:3,000 系列:DPP 接片:32 電阻(歐姆):10k 電路數:1 溫度系數:標準值 300 ppm/°C 存儲器類型:非易失 接口:3 線串行(芯片選擇,遞增,增/減) 電源電壓:2.5 V ~ 6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-WFDFN 裸露焊盤 供應商設備封裝:8-TDFN(2x3) 包裝:帶卷 (TR)
AD5175BRMZ-10 功能描述:IC DGTL POT 1024POS 10K 10MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 標準包裝:3,300 系列:WiperLock™ 接片:257 電阻(歐姆):100k 電路數:1 溫度系數:標準值 150 ppm/°C 存儲器類型:易失 接口:3 線 SPI(芯片選擇) 電源電壓:1.8 V ~ 5.5 V 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:8-VDFN 裸露焊盤 供應商設備封裝:8-DFN-EP(3x3) 包裝:帶卷 (TR)