參數資料
型號: 935270053512
廠商: NXP SEMICONDUCTORS
元件分類: 微控制器/微處理器
英文描述: 1 CHANNEL(S), 3M bps, SERIAL COMM CONTROLLER, PQCC44
封裝: PLASTIC, MS-018, SOT-187-2, LCC-44
文件頁數: 10/48頁
文件大?。?/td> 657K
代理商: 935270053512
Philips Semiconductors
SC16C750
Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFO
Product data
Rev. 03 — 14 March 2003
18 of 45
9397 750 11203
Koninklijke Philips Electronics N.V. 2003. All rights reserved.
7.2.1
IER versus Receive FIFO interrupt mode operation
When the receive FIFO (FCR[0] = logic 1), and receive interrupts (IER[0] = logic 1)
are enabled, the receive interrupts and register status will reect the following:
The receive data available interrupts are issued to the external CPU when the
FIFO has reached the programmed trigger level. It will be cleared when the FIFO
drops below the programmed trigger level.
FIFO status will also be reected in the user accessible ISR register when the
FIFO trigger level is reached. Both the ISR register status bit and the interrupt will
be cleared when the FIFO drops below the trigger level.
The data ready bit (LSR[0]) is set as soon as a character is transferred from the
shift register to the receive FIFO. It is reset when the FIFO is empty.
7.2.2
IER versus Receive/Transmit FIFO polled mode operation
When FCR[0] = logic 1, resetting IER[0-3] enables the SC16C750 in the FIFO polled
mode of operation. Since the receiver and transmitter have separate bits in the LSR,
either or both can be used in the polled mode by selecting respective transmit or
receive control bit(s).
LSR[0] will be a logic 1 as long as there is one byte in the receive FIFO.
LSR[1-4] will provide the type of errors encountered, if any.
LSR[5] will indicate when the transmit FIFO is empty.
LSR[6] will indicate when both the transmit FIFO and transmit shift register are
empty.
LSR[7] will indicate any FIFO data errors.
1
IER[1]
Transmit Holding Register interrupt. This interrupt will be issued whenever
the THR is empty, and is associated with LSR[1].
Logic 0 = Disable the transmitter empty interrupt (normal default
condition).
Logic 1 = Enable the transmitter empty interrupt.
0
IER[0]
Receive Holding Register interrupt. This interrupt will be issued when the
FIFO has reached the programmed trigger level, or is cleared when the
FIFO drops below the trigger level in the FIFO mode of operation.
Logic 0 = Disable the receiver ready interrupt (normal default condition).
Logic 1 = Enable the receiver ready interrupt.
Table 9:
Interrupt Enable Register bits description…continued
Bit
Symbol
Description
相關PDF資料
PDF描述
935270053518 1 CHANNEL(S), 3M bps, SERIAL COMM CONTROLLER, PQCC44
935270054157 1 CHANNEL(S), 3M bps, SERIAL COMM CONTROLLER, PQFP64
08051C103JA74A General Specifications
935270056529 4 CHANNEL(S), 5M bps, SERIAL COMM CONTROLLER, PQCC68
935270056518 4 CHANNEL(S), 5M bps, SERIAL COMM CONTROLLER, PQCC68
相關代理商/技術參數
參數描述
935270713557 制造商:NXP Semiconductors 功能描述:SUB ONLY IC CHP
935270792551 制造商:NXP Semiconductors 功能描述:IC BUFF DVR TRI-ST 16BIT 56VFBGA
935270792557 制造商:NXP Semiconductors 功能描述:IC BUFF DVR TRI-ST 16BIT 56VFBGA
935270793551 制造商:NXP Semiconductors 功能描述:IC BUS TRCVR 3-ST 16BIT 56VFBGA
935270793557 制造商:NXP Semiconductors 功能描述:IC BUS TRCVR 3-ST 16BIT 56VFBGA