參數資料
型號： 78Q8430-ARM9-EVM
廠商： Maxim Integrated Products
文件頁數： 20/88頁
文件大小： 0K
描述： EVALUATION MODULE 78Q8430 ARM9
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 1
系列： *
DS_8430_001
78Q8430 Data Sheet
Rev. 1.2
27
The purpose of a static transmit QUE is to allow the host to configure a frame that will need to be
transmitted multiple times or transmitted at a later time without any interaction with the host. Transmit
QUE2 and QUE5 are static QUEs. Transmit QUE2 is best suited for MAC control pause frames as it can
be triggered to transmit by a main buffer watermark. Transmit QUE5 is best suited to Host Not
Responding (HNR) frames as it can be triggered to transmit by a host interrupt timeout.
When the MAC transmitter is idle and ready to transmit a frame, it determines which QUE to read from on
a priority basis. The lowest numbered QUE containing data that needs to be transmitted is selected by
the MAC, which means when more than one transmit QUE is ready, the one with the lowest number
always gets priority.
6.3
Host Interface
6.3.1
Reading Receive Data
The status of the frame at the top of the receive FIFO can be obtained by reading the Receive Packet
Status Register (RPSR). The 16 LSBs of the RPSR contain a count of the total number of bytes that
have entered the receive FIFO for this frame. A value of zero means that there are no new frames in the
receive FIFO. As frame bytes enter the FIFO, the count value is incremented. However, the count value
does not decrease the bytes read out of the read FIFO such that the final value will always be the final
frame size.
The MSB of the RPSR is the DONE bit. Once the last byte in the frame has entered the receive FIFO,
the DONE bit is set indicating that the count value contained in the total bytes field now contains the final
size in bytes of the frame and the error status and classification fields now contain the final frame status.
When the DONE bit is asserted, this also indicates that the status for this frame has been removed from
the receive status FIFO and future reads of the RPSR will refer to the next frame in the receive FIFO,
even if all of the data for the current frame has not been retrieved.
The frame data is read from the receive FIFO 32 bits at a time by successive reads to the Receive Data
Register (RDR). If the frame length is not an even multiple of 4 bytes then the final read of the RPDR
register for that frame will be padded with zeros.
6.3.2
Writing Transmit Data
A transmit QUE is initialized by writing to its Packet Control Word Register (PCWR). This will assign an
ID to the frame and select various transmission options. The frame size must then be set by writing to the
QUE Packet Size Register (PSZR). Transmit data is then written to the transmit FIFO 32 bits at a time via
successive writes to the Transmit Data Register (TDR).
If more bytes are written to the TDR than indicated n the PSZR, the excess bytes are ignored. Writes to
the TDR past the end of the frame, however, will trigger a transmit FIFO overrun interrupt condition.
Similarly, if a new frame is initialized by a write to the PCWR before the frame length counter is expired, a
transmit FIFO under-run interrupt condition will result and the previous frame will be aborted. If there is
any question, the PSZR can be queried for the remaining number of bytes expected in the previous frame
before a new frame is initialized.
In the event that the host wishes to terminate a frame early without triggering an under-run interrupt and
aborting the frame, or if the size of the frame is not initially known, the PSZR can be rewritten at any time
before the end of the frame’s transmission. As an example, no matter what the current value of the PSZR
is, if it is written with a value of one then the next write to the TDR will add one byte to the completed
frame. Conversely, if the frame byte counter is about to expire then writing a larger value to the PSZR will
extend the frame. It is an error to write a value of zero to the PSZR and the circuit behavior in this case is
undefined.
As each frame egresses the transmit FIFO, its status is placed in the transmit status FIFO. Transmit
frame status is recovered by reading the Transmit Packet Status Register (TPSR). The Packet ID field
from the PCWR is also placed in the TPSR such that the status can be associated with the exact frame to
which it belongs.
相關PDF資料
PDF描述
VE-24T-EY-S CONVERTER MOD DC/DC 6.5V 50W
M1YXK-2640K IDC CABLE - MPD26K/MC26F/X
382LX392M200N082 CAP ALUM 3900UF 200V 20% SNAP
M3DEK-2606R IDC CABLE - MKR26K/MC26M/MCE26K
ECM30DCBD-S189 CONN EDGECARD 60POS R/A .156 SLD
相關代理商/技術參數
參數描述
78Q8430EBST#DB 功能描述:以太網開發工具 3-in-1 Silicon Delay Line RoHS:否 制造商:Micrel 產品:Evaluation Boards 類型:Ethernet Transceivers 工具用于評估:KSZ8873RLL 接口類型:RMII 工作電源電壓:
78Q8430STEM#DB 功能描述:以太網開發工具 3-in-1 Silicon Delay Line RoHS:否 制造商:Micrel 產品:Evaluation Boards 類型:Ethernet Transceivers 工具用于評估:KSZ8873RLL 接口類型:RMII 工作電源電壓:
78-R3 功能描述:3M SCOTCHCAST REENTERABLE SIGNAL 制造商:3m 系列:* 零件狀態:在售 標準包裝:1
78-R4 功能描述:3M SCOTCHCAST REENTERABLE SIGNAL 制造商:3m 系列:* 零件狀態:在售 標準包裝:1
78RB02 功能描述:SWITCH 2 POS DIP RECESSED UNSLD RoHS:否 類別:開關 >> DIP 系列:78 特色產品:RDM Series Rotary DIP Switch 標準包裝:70 系列:RDM 電路:十六進制 位置數:16 觸點額定電壓:0.1A @ 42VDC 觸動器類型:用于工具旋轉 觸動器電平:凹槽式 安裝類型:通孔 方向:頂部觸動 可清洗:是 其它名稱:EG4977-5RDMAR16PIT
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*