502
APPENDIX B DEVELOPMENT TOOLS
B.3.1 Hardware (2/2)
(2) When using the in-circuit emulator IE-78001-R-A
IE-78001-R-A
Note
In-circuit Emulator
IE-70000-98-IF-B or
IE-7000-98-IF-C
Note
Interface Adapter
IE-70000-PC-IF-B or
IE-7000-PC-IF-C
Note
Interface Adapter
IE-78000-R-SV3
Interface Adapter
IE-78018-NS-EM1
Note
Emulation Board
IE-78K0-R-EX1
Note
Emulation Probe
Conversion Board
IE-78014R-EM-A
Emulation Board
EP-78240GC-R
Emulation Probe
EV-9200GC-64
Conversion Socket
(Refer to
Figure B-2
)
EP-78012GK-R
Emulation Probe
TGK-064SBW
Conversion Adapter
(Refer to
Figure B-4
)
EV-9900
Note
Under development
Remarks 1.
TGK-064SBW is a product of TOKYO ELETECH Corporation.
Reference: Daimaru Kogyo Ltd. Electronics Dept. (TEL: Tokyo 03-3820-7112)
Electronics 2nd Dept. (TEL: Osaka 06-244-6672)
2.
EV-9200GC-64 is sold in five units.
3.
TGK-064SBW is sold in one units.
The in-circuit emulator serves to debug hardware and software when developing
application systems using a 78K/0 Series product. It corresponds to integrated
debugger (ID78K0). This emulator should be used in combination with emulation
probe and interface adapter, which is required to connect this emulator to the host
machine.
This adapter is required when using the PC-9800 Series computer (except notebook
type) as the IE-78001-R-A host machine.
This adapter is required when using the IBM PC/AT and its compatible computers
as the IE-78001-R-A host machine.
This is adapter and cable required when using an EWS computer as the IE-78001-
R-A host machine, and is used connected to the board in the IE-78000-R-A.
As Ethernet
TM
, 10Base-5 is supported. If the other methods are used, a commer-
cially available conversion adapter is necessary.
This board emulates the operations of the peripheral hardware peculiar to a device.
It should be used in combination with an in-circuit emulator and emulation conver-
sion board.
This board is required when using the IE-78018-NS-EM1 on the IE-78001-R-A.
This board emulates the operations of the peripheral hardware peculiar to a device
(3.0 to 6.0 V supported).
It should be used in combination with the IE-78001-R-A.
This probe is used to connect the in-circuit emulator to the target system and is
designed for 64-pin plastic QFP (GC-AB8 type).
This conversion socket connects the EP-78240GC-R to the target system board
designed to mount a 64-pin plastic QFP (GC-AB8 type).
Instead of connecting the EP-78240GC-R, the
μ
PD78P018FKK-S or 78P018FYKK-S
(ceramic WQFN) can also be connected.
This probe is used to connect the in-circuit emulator to the target system and is
designed for 64-pin plastic LQFP (GK-8A8 type).
This conversion socket connects the EP-78012GK-R to the target system board
designed to mount a 64-pin plastic LQFP (GK-8A8 type).
Jig used to remove the
μ
PD78P018FKK-S or 78P018FYKK-S from the EV9200GC-
64.