參數資料
型號： XRT75L03DIV-F
廠商： Exar Corporation
文件頁數： 112/134頁
文件大?。?/td> 0K
描述： IC LIU E3/DS3/STS-1 3CH 128LQFP
標準包裝： 72
類型： 線路接口裝置（LIU）
驅動器/接收器數： 3/3
規程： DS3，E3，STS-1
電源電壓： 3.135 V ~ 3.465 V
安裝類型： 表面貼裝
封裝/外殼： 128-LQFP 裸露焊盤
供應商設備封裝： 128-LQFP（14x20）
包裝： 托盤
á
XRT75L03D
THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
REV. 1.0.0
74
1
Receive LOS
Defect Condition
Declared
R/O
0
Receive LOS (Loss of Signal) Defect Condition
Declared:
This READ-ONLY bit-field indicates whether or not the
Receive Section (within Channel_n) is currently declaring
the LOS defect condition.
The Receive Section (of Channel_n) will declare the LOS
defect condition, if any one of the following conditions is
met.
If the Digital LOS Detector declares the LOS defect
condition (for DS3 or STS-1 applications)
If the Analog LOS Detector declares the LOS defect
condition (for DS3 or STS-1 applications)
If the ITU-T G.775 LOS Detector declares the LOS
defect condition (for E3 applications).
0 - Indicates that the Receive Section of Channel_n is NOT
currently declaring the LOS Defect Condition.
1 - Indicates that the Receive Section of Channel_n is cur-
rently declaring the LOS Defect condition.
0Transmit DMO
Condition Declared
R/O
0
Transmit DMO (Drive Monitor Output) Condition
Declared:
This READ-ONLY bit-field indicates whether or not the
Transmit Section of Channel_n is currently declaring the
DMO Alarm condition.
If configured accordingly, the Transmit Section will either
internally or externally check the Transmit Output DS3/E3/
STS-1 Line signal for bipolar pulses via the TTIP_n and
TRING_n output signals. If the Transmit Section were to
detect no bipolar for 128 consecutive bit-periods, then it
will declare the Transmit DMO Alarm condition. This par-
ticular alarm can be used to check for fault conditions on
the Transmit Output Line Signal path.
The Transmit Section will clear the Transmit DMO Alarm
condition the instant that it detects some bipolar activity on
the Transmit Output Line signal.
0 - Indicates that the Transmit Section of Channel_n is
NOT currently declaring the Transmit DMO Alarm condi-
tion.
1 - Indicates that the Transmit Section of Channel_n is cur-
rently declaring the Transmit DMO Alarm condition.
BIT NUMBER
NAME
TYPE
DEFAULT
VALUE
DESCRIPTION
相關PDF資料
PDF描述
XRT75L03IV-F IC LIU E3/DS3/STS-1 3CH 128LQFP
XRT75L04DIV-F IC LIU E3/DS3/STS-1 4CH 176TQFP
XRT75L04IV-F IC LIU E3/DS3/STS-1 4CH 176LQFP
XRT75L06DIB-F IC LIU E3/DS3/STS-1 6CH 217BGA
XRT75L06IB-F IC LIU E3/DS3/STS-1 6CH 217BGA
相關代理商/技術參數
參數描述
XRT75L03DIVTR 功能描述:時鐘合成器/抖動清除器 3CHNNEL E3/DS3/STS 1 SONET DE-SYNCH RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
XRT75L03DIVTR-F 功能描述:接口 - 專用 RoHS:否 制造商:Texas Instruments 產品類型:1080p60 Image Sensor Receiver 工作電源電壓:1.8 V 電源電流:89 mA 最大功率耗散: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:BGA-59
XRT75L03ES 功能描述:時鐘合成器/抖動清除器 3 CH T3/E3/STS1 LIU+JA 3.3V RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
XRT75L03IV 功能描述:外圍驅動器與原件 - PCI 3CH E3/DS3/STS1 JITTER ATTENUATOR RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
XRT75L03IV-F 功能描述:外圍驅動器與原件 - PCI 3-Ch DS3, E3, STS-1 RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*