參數資料
型號： XQ2V6000-4CG717M
廠商： Xilinx, Inc.
英文描述： QPro Virtex-II 1.5V Military QML Platform FPGAs
中文描述： QPro的Virtex - II 1.5V的軍事QML第平臺FPGA
文件頁數： 4/128頁
文件大?。?/td> 2738K
代理商： XQ2V6000-4CG717M
QPro Virtex-II 1.5V Military QML Platform FPGAs
4
www.xilinx.com
1-800-255-7778
DS122 (v1.1) January 7, 2004
Product Specification
R
Configurable Logic Blocks (CLBs)
CLB resources include four slices and two 3-state buffers.
Each slice is equivalent and contains:
Two function generators (F and G)
Two storage elements
Arithmetic logic gates
Large multiplexers
Wide function capability
Fast carry look-ahead chain
Horizontal cascade chain (OR gate)
The function generators F and G are configurable as 4-input
look-up tables (LUTs), as 16-bit shift registers, or as 16-bit
distributed SelectRAM memory.
In addition, the two storage elements are either edge-trig-
gered D-type flip-flops or level-sensitive latches.
Each CLB has internal fast interconnect and connects to a
switch matrix to access general routing resources.
Block SelectRAM Memory
The block SelectRAM memory resources are 18 Kb of
dual-port RAM, programmable from 16K x 1 bit to 512 x 36
bits, in various depth and width configurations. Each port is
totally synchronous and independent, offering three
"read-during-write" modes. Block SelectRAM memory is
cascadable to implement large embedded storage blocks.
Supported memory configurations for dual-port and sin-
gle-port modes are shown in
Table 3
.
A multiplier block is associated with each SelectRAM mem-
ory block. The multiplier block is a dedicated 18 x 18-bit
multiplier and is optimized for operations based on the block
SelectRAM content on one port. The 18 x 18 multiplier can
be used independently of the block SelectRAM resource.
Read/multiply/accumulate operations and DSP filter struc-
tures are extremely efficient.
Both the SelectRAM memory and the multiplier resource
are connected to four switch matrices to access the general
routing resources.
Global Clocking
The DCM and global clock multiplexer buffers provide a
complete solution for designing high-speed clocking
schemes.
Up to 12 DCM blocks are available. To generate de-skewed
internal or external clocks, each DCM can be used to elimi-
nate clock distribution delay. The DCM also provides 90-,
180-, and 270-degree phase-shifted versions of its output
clocks. Fine-grained phase shifting offers high-resolution
phase adjustments in increments of 1/256 of the clock
period. Very flexible frequency synthesis provides a clock
output frequency equal to any M/D ratio of the input clock
frequency, where M and D are two integers. For the exact
timing parameters, see
QPro Virtex-II Switching Charac-
teristics
, page 51
.
Virtex-II devices have 16 global clock MUX buffers with up
to eight clock nets per quadrant. Each global clock MUX
buffer can select one of the two clock inputs and switch
glitch-free from one clock to the other. Each DCM block is
able to drive up to four of the 16 global clock MUX buffers.
Routing Resources
The IOB, CLB, block SelectRAM, multiplier, and DCM ele-
ments all use the same interconnect scheme and the same
access to the global routing matrix. Timing models are
shared, greatly improving the predictability of the perfor-
mance of high-speed designs.
There are a total of 16 global clock lines with eight available
per quadrant. In addition, 24 vertical and horizontal long
lines per row or column as well as massive secondary and
local routing resources provide fast interconnect. Virtex-II
buffered interconnects are relatively unaffected by net
fanout, and the interconnect layout is designed to minimize
crosstalk.
Horizontal and vertical routing resources for each row or
column include:
24 long lines
120 hex lines
40 double lines
16 direct connect lines (total in all four directions)
Boundary Scan
Boundary-scan instructions and associated data registers
support a standard methodology for accessing and config-
uring Virtex-II devices that complies with IEEE standards
1149.1 — 1993 and 1532. A system mode and a test mode
are implemented. In system mode, a Virtex-II device per-
forms its intended mission even while executing non-test
boundary-scan instructions. In test mode, boundary-scan
test instructions control the I/O pins for testing purposes.
The Virtex-II Test Access Port (TAP) supports BYPASS,
PRELOAD, SAMPLE, IDCODE, and USERCODE non-test
instructions. The EXTEST, INTEST, and HIGHZ test instruc-
tions are also supported.
Table 3:
Dual-Port And Single-Port Configurations
16K x 1 bit
2K x 9 bits
8K x 2 bits
1K x 18 bits
4K x 4 bits
512 x 36 bits
ds122_1_1.fm Page 4 Wednesday, January 7, 2004 9:15 PM
相關PDF資料
PDF描述
XQ2V6000-4CG717N QPro Virtex-II 1.5V Military QML Platform FPGAs
XQ2V6000-4FG456M QPro Virtex-II 1.5V Military QML Platform FPGAs
XQ2V6000-4FG456N QPro Virtex-II 1.5V Military QML Platform FPGAs
XQ4005EX-4CB191N QML High-Reliability FPGAs
XQ4005EX-3CB191M QML High-Reliability FPGAs
相關代理商/技術參數
參數描述
XQ2V6000-4CG717N 制造商:XILINX 制造商全稱:XILINX 功能描述:QPro Virtex-II 1.5V Military QML Platform FPGAs
XQ2V6000-4EF1152I 制造商:XILINX 制造商全稱:XILINX 功能描述:QPro Virtex-II 1.5V Platform FPGAs
XQ2V6000-4FG456M 制造商:XILINX 制造商全稱:XILINX 功能描述:QPro Virtex-II 1.5V Military QML Platform FPGAs
XQ2V6000-4FG456N 制造商:XILINX 制造商全稱:XILINX 功能描述:QPro Virtex-II 1.5V Military QML Platform FPGAs
XQ2V6000-5EF1152I 制造商:XILINX 制造商全稱:XILINX 功能描述:QPro Virtex-II 1.5V Platform FPGAs
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*