
www.fairchildsemi.com
6
USB1
T1
1
0
5
A
DC Electrical Characteristics (Continued)
Note 8: ILOAD includes the pull-up resistor current via pin VPU
Note 9: The minimum voltage in Suspend mode is 2.7V.
Note 10: Not tested in production, value based on characterization.
Note 11: Excludes any current from load and VPU current to the 1.5k: resistor.
Note 12: Includes current between Vpu and the 1.5k internal pull-up resistor.
Note 13: When VCCIO 2.7V, minimum value for VREGTH = 2.0V for supply present condition.
DC Electrical Characteristics (Digital Pins – excludes D, D Pins)
Over recommended range of supply voltage and operating free air temperature (unless otherwise noted). VCCIO = 1.6V to 3.6V
Note 14: If VCCIO t VREG then leakage current will be higher than specified.
Symbol
Parameter
Conditions
Limits
Units
40qC to 85qC
Min
Typ
Max
IDr(SHARING)
Sharing Mode Load Current on
VCC (5V) Not Connected
10.0
PA
D
/D Pins
Config = LOW; VDr = 3.6V
VCCTH
VCC Threshold Detection Voltage
1.65V
d VCCIO d 3.6V
V
Supply Lost
3.6
Supply Present
4.1
VCCHYS
VCC Threshold Detection
VCCIO = 1.8V
70.0
mV
Hysteresis Voltage
VCCIOTH
VCCIO Threshold Detection Voltage
2.7V
d VREG d 3.6V
V
Supply Lost
0.5
Supply Present
1.4
VCCIOHYS
VCCIO Threshold Detection
VREG = 3.3V
450
mV
Hysteresis Voltage
Symbol
Parameter
Test Conditions
Limits
Units
40qC to 85qC
Min
Max
Input Levels
VIL
LOW Level Input Voltage
0.3
V
VIH
HIGH Level Input Voltage
0.6*VCCIO
V
VHYS
Hysteresis Voltage P11
P12
Pins Vpo/Vmo, VCCIO = 3.3V
0.3
0.7
V
Output Levels
VOL
LOW Level Output Voltage
IOL = 2 mA
0.4
V
IOL = 100 PA0.15
VOH
HIGH Level Output Voltage
IOH = 2 mA
VCCIO - 0.4
V
IOH = 100 PAVCCIO- 0.15
Leakage Current
ILI
Input Leakage Current
VCCIO = 1.65V to 3.6V
r1.0 (Note 14)
PA
Capacitance
CIN, CI/O
Input Capacitance
Pin to GND
10.0
pF