參數資料
型號： UPD78F0545GC(T2)-UBT-A
元件分類： 微控制器/微處理器
英文描述： 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
封裝： 14 X 14 MM, LEAD FREE, PLASTIC, LQFP-80
文件頁數： 49/96頁
文件大?。?/td> 4109K
代理商： UPD78F0545GC(T2)-UBT-A
Preliminary Product Information U14673EJ1V0PM00
53
PD789322,789324,789326,789327
5.7.3 LCD controller/driver control registers
The LCD controller/driver is controlled by the following three registers.
LCD display mode register 0 (LCDM0)
LCD clock control register 0 (LCDC0)
Port function register 8 (PF8)
(1) LCD display mode register 0 (LCDM0)
This register is used to enable/disable operation, and set the operation mode and the supply of power for LCD drive.
LCDM0 is set using a 1-bit or 8-bit memory manipulation instruction.
RESET input sets this register to 00H.
Figure 5-26. Format of LCD Display Mode Register 0
Symbol
<7>
<6>
5
<4>
3
2
1
0
Address
After reset
R/W
LCDM0 LCDON0
VAON0
0
LIPS0
0
FFB0H
00H
R/W
LCDON0
LCD display enable/disable
0
Display off (all segment outputs are unselected for signal output)
1
Display on
VAON0
LCD controller/driver operation mode
Note
0
No internal booster (for 2.7- to 5.5-V display)
1
Internal booster enabled (for 1.8- to 5.5-V display)
LIPS0
Supply of power for LCD drive
Note
0
Power not supplied for LCD drive
1
Power supplied for LCD drive
Note To reduce power consumption when the LCD display is not being used, set VAON0 and LIPS0 to 0.
Cautions 1. Always set bits 0 to 3 and 5 to 0.
2. When manipulating VAON0, observe following procedure.
A. When internal booster is stopped after changing to the display off condition from the
display on condition
1) Set the display off condition by setting LCDON0 = 0.
2) Set all segment buffers and common buffers to output disabled by setting LIPS0 = 0.
3) Stop the booster by setting VAON0 = 0.
B. When the booster is stopped in the display on condition
This is prohibited.
Be sure to stop the booster after changing to the display off
condition.
C. When the display is turned on from the booster-stoped condition
1) Wait about 500 ms after starting the booster by setting VAON0 = 1.
2) Set all segment buffers and common buffers to signal output unselected by setting
LIPS0 = 1.
3) Set the display on condition by setting LCDON0 = 1.
相關PDF資料
PDF描述
UPD78F0547GC(T)-UBT-A 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
UPD78F0562MC-CAA-AX 8-BIT, FLASH, 10 MHz, MICROCONTROLLER, PDSO20
UPD78F0893GK(A)-GAK-AX 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
UPD78F1005GB-GAG-AX 16-BIT, FLASH, 8 MHz, RISC MICROCONTROLLER, PQFP52
UPD78F1146AGB-GAH-AX 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64
相關代理商/技術參數
參數描述
UPD78F0545GC-UBT-A 制造商:Renesas Electronics Corporation 功能描述:
UPD78F0545GK(T)-8EU-A 制造商:NEC Electronics Corporation 功能描述:8BIT MCU 60K FLASH 3KB RAM LQFP 制造商:Renesas 功能描述:MCU 8-Bit 78K0 CISC 60KB Flash 2.5V/3.3V/5V 80-Pin LQFP
UPD78F0546AGC-GAD-AX 功能描述:MCU 8BIT 80-LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:78K0/Kx2 標準包裝:250 系列:80C 核心處理器:8051 芯體尺寸:8-位 速度:16MHz 連通性:EBI/EMI，I²C，UART/USART 外圍設備:POR，PWM，WDT 輸入/輸出數:40 程序存儲器容量:- 程序存儲器類型:ROMless EEPROM 大小:- RAM 容量:256 x 8 電壓 - 電源 (Vcc/Vdd):4.5 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:68-LCC（J 形引線） 包裝:帶卷 (TR)
UPD78F0546AGK-GAK-AX 功能描述:MCU 8BIT 80-LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:78K0/Kx2 標準包裝:300 系列:78K0R/Ix3 核心處理器:78K/0R 芯體尺寸:16-位 速度:40MHz 連通性:3 線 SIO，I²C，LIN，UART/USART 外圍設備:DMA，LVD，POR，PWM，WDT 輸入/輸出數:27 程序存儲器容量:16KB（16K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:38-SSOP 包裝:托盤
UPD78F0546GK-8EU-A 制造商:Renesas Electronics Corporation 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*