參數資料
型號: TPA2015D1YZHT
廠商: TEXAS INSTRUMENTS INC
元件分類: 音頻/視頻放大
英文描述: 1.7 W, 1 CHANNEL, AUDIO AMPLIFIER, BGA16
封裝: 1.954 X 1.954 MM, 0.50 MM PITCH, DSBGA-16
文件頁數: 10/27頁
文件大小: 1016K
代理商: TPA2015D1YZHT
L
PVDD
I
= I
VBAT
0.8
÷
è
SLOS638 – MAY 2010
www.ti.com
The boost converter design is optimized for driving the integrated Class-D amplifier only. It lacks protection
circuitry recommended for driving loads other than the integrated Class-D amplifier.
Boost Converter Overvoltage Protection
The TPA2015D1 internal boost converter operates in a discontinuous mode to improve the efficiency at light
loads. The boost converter has overvoltage protection that disables the boost converter if the output voltage
exceeds 5.8 V. If current is forced into the PVOUT terminal, the voltage clamp will sink up to 10 mA. If more than
10 mA is forced into PVOUT, then the PVOUT voltage will increase. Refer to the SPEAKER LOAD LIMITATION
section for details.
Boost Converter Component Section
Boost Terms
The following is a list of terms and definitions used in the boost equations found later in this document.
C
Minimum boost capacitance required for a given ripple voltage on PVOUT.
L
Boost inductor.
fBOOST
Switching frequency of the boost converter.
IPVDD
Current pulled by the Class-D amplifier from the boost converter.
IL
Average current through the boost inductor.
PVDD
Supply voltage for the Class-D amplifier. (Voltage generated by the boost converter output.)
(PVOUT)
VBAT
Supply voltage to the IC.
ΔIL
Ripple current through the inductor.
ΔV
Ripple voltage on PVOUT.
Boost Converter Inductor Selection
Working inductance decreases as inductor current and temperature increases. If the drop in working inductance
is severe enough, it may cause the boost converter to become unstable, or cause the TPA2015D1 to reach its
current limit at a lower output voltage than expected. Inductor vendors specify currents at which inductor values
decrease by a specific percentage. This can vary by 10% to 35%. Inductance is also affected by dc current and
temperature.
Inductor Equations
Inductor current rating is determined by the requirements of the load. The inductance is determined by two
factors: the minimum value required for stability and the maximum ripple current permitted in the application.
Use Equation 1 to determine the required current rating. Equation 1 shows the approximate relationship between
the average inductor current, IL, to the load current, load voltage, and input voltage (IPVDD, PVDD, and VBAT,
respectively). Insert IPVDD, PVDD, and VBAT into Equation 1 and solve for IL. The inductor must maintain at least
90% of its initial inductance value at this current.
(1)
WARNING
Use a minimum working inductance of 1.3 mH. Lower values may damage the
inductor.
18
Copyright 2010, Texas Instruments Incorporated
Product Folder Link(s): TPA2015D1
相關PDF資料
PDF描述
TPA2016D2YZHR 2.8 W, 2 CHANNEL, AUDIO AMPLIFIER, BGA16
TPA2016D2YZHT 2.8 W, 2 CHANNEL, AUDIO AMPLIFIER, BGA16
TPA2016D2RTJR 2.8 W, 2 CHANNEL, AUDIO AMPLIFIER, PQCC20
TPA2016D2RTJT 2.8 W, 2 CHANNEL, AUDIO AMPLIFIER, PQCC20
TPA2017D2RTJR 2.8 W, 2 CHANNEL, AUDIO AMPLIFIER, PQCC20
相關代理商/技術參數
參數描述
TPA2016D2 制造商:TI 制造商全稱:Texas Instruments 功能描述:1.7-W/Ch Stereo Class-D Audio Amplifier with Dynamic Range Compression and AGC
TPA2016D2EVM 功能描述:音頻 IC 開發工具 TPA2016D2EVM Eval Mod RoHS:否 制造商:Texas Instruments 產品:Evaluation Kits 類型:Audio Amplifiers 工具用于評估:TAS5614L 工作電源電壓:12 V to 38 V
TPA2016D2RGPR 制造商:TI 制造商全稱:Texas Instruments 功能描述:1.7-W/Ch Stereo Class-D Audio Amplifier with Dynamic Range Compression and AGC
TPA2016D2RGPT 制造商:TI 制造商全稱:Texas Instruments 功能描述:1.7-W/Ch Stereo Class-D Audio Amplifier with Dynamic Range Compression and AGC
TPA2016D2RTJR 功能描述:音頻放大器 1.7-W/Ch St Class-D Audio Amp RoHS:否 制造商:STMicroelectronics 產品:General Purpose Audio Amplifiers 輸出類型:Digital 輸出功率: THD + 噪聲: 工作電源電壓:3.3 V 電源電流: 最大功率耗散: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:TQFP-64 封裝:Reel